u-boot/drivers/watchdog/gpio_wdt.c

97 lines
1.9 KiB
C
Raw Normal View History

watchdog: add gpio watchdog driver A rather common kind of external watchdog circuit is one that is kept alive by toggling a gpio. Add a driver for handling such a watchdog. The corresponding linux driver apparently has support for some watchdog circuits which can be disabled by tri-stating the gpio, but I have never actually encountered such a chip in the wild; the whole point of adding an external watchdog is usually that it is not in any way under software control. For forward-compatibility, and to make DT describe the hardware, the current driver only supports devices that have the always-running property. I went a little back and forth on whether I should fail ->probe or only ->start, and ended up deciding ->start was the right place. The compatible string is probably a little odd as it has nothing to do with linux per se - however, I chose that to make .dts snippets reusable between device trees used with U-Boot and linux, and this is the (only) compatible string that linux' corresponding driver and DT binding accepts. I have asked whether one should/could add "wdt-gpio" to that binding, but the answer was no: https://lore.kernel.org/lkml/CAL_JsqKEGaFpiFV_oAtE+S_bnHkg4qry+bhx2EDs=NSbVf_giA@mail.gmail.com/ If someone feels strongly about this, I can certainly remove the "linux," part from the string - it probably wouldn't the only place where one can't reuse a DT snippet as-is between linux and U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-19 09:57:04 +00:00
// SPDX-License-Identifier: GPL-2.0+
#include <dm.h>
#include <dm/device_compat.h>
#include <wdt.h>
#include <asm/gpio.h>
#include <linux/delay.h>
enum {
HW_ALGO_TOGGLE,
HW_ALGO_LEVEL,
};
watchdog: add gpio watchdog driver A rather common kind of external watchdog circuit is one that is kept alive by toggling a gpio. Add a driver for handling such a watchdog. The corresponding linux driver apparently has support for some watchdog circuits which can be disabled by tri-stating the gpio, but I have never actually encountered such a chip in the wild; the whole point of adding an external watchdog is usually that it is not in any way under software control. For forward-compatibility, and to make DT describe the hardware, the current driver only supports devices that have the always-running property. I went a little back and forth on whether I should fail ->probe or only ->start, and ended up deciding ->start was the right place. The compatible string is probably a little odd as it has nothing to do with linux per se - however, I chose that to make .dts snippets reusable between device trees used with U-Boot and linux, and this is the (only) compatible string that linux' corresponding driver and DT binding accepts. I have asked whether one should/could add "wdt-gpio" to that binding, but the answer was no: https://lore.kernel.org/lkml/CAL_JsqKEGaFpiFV_oAtE+S_bnHkg4qry+bhx2EDs=NSbVf_giA@mail.gmail.com/ If someone feels strongly about this, I can certainly remove the "linux," part from the string - it probably wouldn't the only place where one can't reuse a DT snippet as-is between linux and U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-19 09:57:04 +00:00
struct gpio_wdt_priv {
struct gpio_desc gpio;
unsigned int hw_algo;
bool always_running;
int state;
watchdog: add gpio watchdog driver A rather common kind of external watchdog circuit is one that is kept alive by toggling a gpio. Add a driver for handling such a watchdog. The corresponding linux driver apparently has support for some watchdog circuits which can be disabled by tri-stating the gpio, but I have never actually encountered such a chip in the wild; the whole point of adding an external watchdog is usually that it is not in any way under software control. For forward-compatibility, and to make DT describe the hardware, the current driver only supports devices that have the always-running property. I went a little back and forth on whether I should fail ->probe or only ->start, and ended up deciding ->start was the right place. The compatible string is probably a little odd as it has nothing to do with linux per se - however, I chose that to make .dts snippets reusable between device trees used with U-Boot and linux, and this is the (only) compatible string that linux' corresponding driver and DT binding accepts. I have asked whether one should/could add "wdt-gpio" to that binding, but the answer was no: https://lore.kernel.org/lkml/CAL_JsqKEGaFpiFV_oAtE+S_bnHkg4qry+bhx2EDs=NSbVf_giA@mail.gmail.com/ If someone feels strongly about this, I can certainly remove the "linux," part from the string - it probably wouldn't the only place where one can't reuse a DT snippet as-is between linux and U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-19 09:57:04 +00:00
};
static int gpio_wdt_reset(struct udevice *dev)
{
struct gpio_wdt_priv *priv = dev_get_priv(dev);
switch (priv->hw_algo) {
case HW_ALGO_TOGGLE:
/* Toggle output pin */
priv->state = !priv->state;
dm_gpio_set_value(&priv->gpio, priv->state);
break;
case HW_ALGO_LEVEL:
/* Pulse */
dm_gpio_set_value(&priv->gpio, 1);
udelay(1);
dm_gpio_set_value(&priv->gpio, 0);
break;
}
return 0;
watchdog: add gpio watchdog driver A rather common kind of external watchdog circuit is one that is kept alive by toggling a gpio. Add a driver for handling such a watchdog. The corresponding linux driver apparently has support for some watchdog circuits which can be disabled by tri-stating the gpio, but I have never actually encountered such a chip in the wild; the whole point of adding an external watchdog is usually that it is not in any way under software control. For forward-compatibility, and to make DT describe the hardware, the current driver only supports devices that have the always-running property. I went a little back and forth on whether I should fail ->probe or only ->start, and ended up deciding ->start was the right place. The compatible string is probably a little odd as it has nothing to do with linux per se - however, I chose that to make .dts snippets reusable between device trees used with U-Boot and linux, and this is the (only) compatible string that linux' corresponding driver and DT binding accepts. I have asked whether one should/could add "wdt-gpio" to that binding, but the answer was no: https://lore.kernel.org/lkml/CAL_JsqKEGaFpiFV_oAtE+S_bnHkg4qry+bhx2EDs=NSbVf_giA@mail.gmail.com/ If someone feels strongly about this, I can certainly remove the "linux," part from the string - it probably wouldn't the only place where one can't reuse a DT snippet as-is between linux and U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-19 09:57:04 +00:00
}
static int gpio_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
{
struct gpio_wdt_priv *priv = dev_get_priv(dev);
if (priv->always_running)
return 0;
return -ENOSYS;
}
static int dm_probe(struct udevice *dev)
{
struct gpio_wdt_priv *priv = dev_get_priv(dev);
int ret;
const char *algo = dev_read_string(dev, "hw_algo");
if (!algo)
return -EINVAL;
if (!strcmp(algo, "toggle"))
priv->hw_algo = HW_ALGO_TOGGLE;
else if (!strcmp(algo, "level"))
priv->hw_algo = HW_ALGO_LEVEL;
else
return -EINVAL;
watchdog: add gpio watchdog driver A rather common kind of external watchdog circuit is one that is kept alive by toggling a gpio. Add a driver for handling such a watchdog. The corresponding linux driver apparently has support for some watchdog circuits which can be disabled by tri-stating the gpio, but I have never actually encountered such a chip in the wild; the whole point of adding an external watchdog is usually that it is not in any way under software control. For forward-compatibility, and to make DT describe the hardware, the current driver only supports devices that have the always-running property. I went a little back and forth on whether I should fail ->probe or only ->start, and ended up deciding ->start was the right place. The compatible string is probably a little odd as it has nothing to do with linux per se - however, I chose that to make .dts snippets reusable between device trees used with U-Boot and linux, and this is the (only) compatible string that linux' corresponding driver and DT binding accepts. I have asked whether one should/could add "wdt-gpio" to that binding, but the answer was no: https://lore.kernel.org/lkml/CAL_JsqKEGaFpiFV_oAtE+S_bnHkg4qry+bhx2EDs=NSbVf_giA@mail.gmail.com/ If someone feels strongly about this, I can certainly remove the "linux," part from the string - it probably wouldn't the only place where one can't reuse a DT snippet as-is between linux and U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-08-19 09:57:04 +00:00
priv->always_running = dev_read_bool(dev, "always-running");
ret = gpio_request_by_name(dev, "gpios", 0, &priv->gpio, GPIOD_IS_OUT);
if (ret < 0) {
dev_err(dev, "Request for wdt gpio failed: %d\n", ret);
return ret;
}
if (priv->always_running)
ret = gpio_wdt_reset(dev);
return ret;
}
static const struct wdt_ops gpio_wdt_ops = {
.start = gpio_wdt_start,
.reset = gpio_wdt_reset,
};
static const struct udevice_id gpio_wdt_ids[] = {
{ .compatible = "linux,wdt-gpio" },
{}
};
U_BOOT_DRIVER(wdt_gpio) = {
.name = "wdt_gpio",
.id = UCLASS_WDT,
.of_match = gpio_wdt_ids,
.ops = &gpio_wdt_ops,
.probe = dm_probe,
.priv_auto = sizeof(struct gpio_wdt_priv),
};