Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-28 23:51:33 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/warp7_defconfig

80 lines
1.9 KiB
Text
Raw Normal View History

warp7: Add initial support Add the basic support for Warp7 board. For more information about this reference design, please visit: https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2016-02-29 12:33:22 +00:00
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_NR_DRAM_BANKS=1
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-30 17:50:32 +00:00
CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0xa0000000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x2000
warp7: Fix U-Boot corruption after saving the environment U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables. Running "saveenv" followed by a "reset" causes U-Boot to hang because of this overlap. Fix this problem by increasing the CONFIG_ENV_OFFSET size. Also, in order to prevent this same problem in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Pierre-Jean Texier <pjtexier@koncepto.io> Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io> Acked-by: Joris Offouga <offougajoris@gmail.com> Tested-by: Joris Offouga <offougajoris@gmail.com>
2019-12-02 23:40:28 +00:00
CONFIG_ENV_OFFSET=0xC0000
Convert CONFIG_SYS_MALLOC_LEN to Kconfig This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-29 01:34:49 +00:00
CONFIG_SYS_MALLOC_LEN=0x2300000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_DM_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="imx7s-warp"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_TARGET_WARP7=y
warp7: defconfig: Fix CAAM on boot with tip-of-tree Booting the following image with tip-of-tree we get a CAAM DECO error (and subsequent crash due to a kernel bug in 4.1). http://freescale.github.io/#download -> BoardsWaRPboard community - WaRP - Wearable Reference PlatformFSL Community BSP 2.3fsl-image-multimediawayland Image: fsl-image-multimedia-imx7s-warp-20180323-90.rootfs.sdcard Error: caam 30900000.caam: Entropy delay = 3200 caam 30900000.caam: failed to acquire DECO 0 <snip> caam 30900000.caam: failed to acquire DECO 0 caam 30900000.caam: Entropy delay = 12400 caam 30900000.caam: failed to acquire DECO 0 caam 30900000.caam: failed to instantiate RNG ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at /home/jenkins/workspace/fsl-community-bsp-pyro_xwayland_2/build/tmp/work-shared/imx7s-warp/kernel-source/mm/vmalloc.c:1465 caam_remove+0x6) Trying to vfree() nonexistent vm area (88047000) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.1.36-4.1-1.0.x-imx-warp7+ga543d1b #1 Hardware name: Freescale i.MX7 Dual (Device Tree) [<80015d54>] (unwind_backtrace) from [<80012688>] (show_stack+0x10/0x14) [<80012688>] (show_stack) from [<8076e810>] (dump_stack+0x78/0x8c) [<8076e810>] (dump_stack) from [<800346a0>] (warn_slowpath_common+0x80/0xb0) [<800346a0>] (warn_slowpath_common) from [<80034700>] (warn_slowpath_fmt+0x30/0x40) [<80034700>] (warn_slowpath_fmt) from [<8054c278>] (caam_remove+0x6c/0x3f4) [<8054c278>] (caam_remove) from [<8054ce74>] (caam_probe+0x874/0xfa8) [<8054ce74>] (caam_probe) from [<80382a7c>] (platform_drv_probe+0x48/0xa4) [<80382a7c>] (platform_drv_probe) from [<80381328>] (driver_probe_device+0x174/0x2a8) [<80381328>] (driver_probe_device) from [<8038152c>] (__driver_attach+0x8c/0x90) [<8038152c>] (__driver_attach) from [<8037f9d4>] (bus_for_each_dev+0x68/0x9c) [<8037f9d4>] (bus_for_each_dev) from [<80380a68>] (bus_add_driver+0xf4/0x1e8) [<80380a68>] (bus_add_driver) from [<80381b38>] (driver_register+0x78/0xf4) [<80381b38>] (driver_register) from [<80009738>] (do_one_initcall+0x8c/0x1d0) [<80009738>] (do_one_initcall) from [<80a66dac>] (kernel_init_freeable+0x140/0x1d0) [<80a66dac>] (kernel_init_freeable) from [<8076aa38>] (kernel_init+0x8/0xe8) [<8076aa38>] (kernel_init) from [<8000f468>] (ret_from_fork+0x14/0x2c) ---[ end trace d5f941204ed8cb28 ]--- caam: probe of 30900000.caam failed with error -11 Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = 80004000 [00000004] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM <snip> [<8055cdf8>] (caam_sm_startup) from [<80aa83c8>] (caam_sm_init+0x50/0x58) [<80aa83c8>] (caam_sm_init) from [<80009738>] (do_one_initcall+0x8c/0x1d0) [<80009738>] (do_one_initcall) from [<80a66dac>] (kernel_init_freeable+0x140/0x1d0) [<80a66dac>] (kernel_init_freeable) from [<8076aa38>] (kernel_init+0x8/0xe8) [<8076aa38>] (kernel_init) from [<8000f468>] (ret_from_fork+0x14/0x2c) Code: e59d300c e2832010 e5843008 e5834068 (e58a2004) ---[ end trace d5f941204ed8cb29 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix: Enable the CAAM correctly by setting CONFIG_ARMV7_BOOT_SEC_DEFAULT=y in the upstream defconfig. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Breno Lima <breno.lima@nxp.com>
2018-04-24 17:44:30 +00:00
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
mx7_common: use Kconfig for ARMv7 non-secure mode Use existing Kconfig symbols to let the user configure whether to build a U-Boot with non-secure mode support or not. This also allows to enable virtualization extension easily. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-13 07:25:41 +00:00
# CONFIG_ARMV7_VIRT is not set
warp7: Add initial support Add the basic support for Warp7 board. For more information about this reference design, please visit: https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2016-02-29 12:33:22 +00:00
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-07 19:25:00 +00:00
CONFIG_IMX_HAB=y
warp7: configs: add CONFIG_FIT option This enable FIT image support. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
2018-09-29 12:05:01 +00:00
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
configs: Re-sync HUSH options Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 01:37:19 +00:00
CONFIG_HUSH_PARSER=y
warp7: Add initial support Add the basic support for Warp7 board. For more information about this reference design, please visit: https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2016-02-29 12:33:22 +00:00
# CONFIG_CMD_BOOTD is not set
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_BOOTZ=y
warp7: Add initial support Add the basic support for Warp7 board. For more information about this reference design, please visit: https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2016-02-29 12:33:22 +00:00
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_MEMTEST=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_MMC=y
cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly update all of the config files we must also update CMD_PART and CMD_GPT to also be in Kconfig in order to avoid complex logic elsewhere to update all of the config files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-27 10:00:42 +00:00
CONFIG_CMD_PART=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_USB=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_USB_MASS_STORAGE=y
config: Move CONFIG_BOARD_LATE_INIT to defconfigs Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-01-21 10:48:33 +00:00
CONFIG_CMD_DHCP=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
warp7: configs: enable CONFIG_CMD_FS_GENERIC This enable generic file system commands (load, ls). Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2018-03-31 22:49:05 +00:00
CONFIG_CMD_FS_GENERIC=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-02-07 19:53:03 +00:00
CONFIG_OF_CONTROL=y
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
CONFIG_ENV_OVERWRITE=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
imx: Convert SERIAL_TAG support to ENV_VARS_UBOOT_RUNTIME_CONFIG No iMX platforms have supported ATAG-based booting. They have however re-used the CONFIG_SERIAL_TAG option as a way to enable support of reading the OTP fuses and setting the serial# environment variable in some cases. Change the warp7 support to use this symbol, use this for updating the rest of the imx7 code, and update the imx8 conditionals. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 13:16:29 +00:00
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
config: Move CONFIG_BOARD_LATE_INIT to defconfigs Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-01-21 10:48:33 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_BOUNCE_BUFFER=y
dfu: Migrate to Kconfig Introduce a hidden USB_FUNCTION_DFU Kconfig option and select it for CMD_DFU (as we must have the DFU command enabled to do anything DFU). Make all of the entries in drivers/dfu/Kconfig depend on CMD_DFU and add options for all of the back end choices that DFU can make use of. Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2016-09-19 17:31:30 +00:00
CONFIG_DFU_MMC=y
usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig Currently the config options CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE are being set in include/configs/<board>.h files and also in <board_name>_defconfig files without a Kconfig option. It is easier for users to set these configs in defconfig files than in config header files as they are a part of the source code. Add Kconfig symbols, and update the defconfigs by using tools/moveconfig.py script. Suggested-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2021-06-01 11:21:47 +00:00
CONFIG_SYS_DFU_DATA_BUF_SIZE=0x1000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-02-07 19:53:03 +00:00
CONFIG_DM_I2C=y
Convert CONFIG_SYS_I2C_MXC et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-19 03:12:33 +00:00
CONFIG_SYS_I2C_MXC=y
Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-05-01 07:58:27 +00:00
CONFIG_SUPPORT_EMMC_BOOT=y
Convert CONFIG_FSL_USDHC to Kconfig This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-14 12:23:43 +00:00
CONFIG_FSL_USDHC=y
mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:05 +00:00
CONFIG_MTD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-02-07 19:53:03 +00:00
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_PFUZE100=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
warp7: Switch to DM Serial This commit switches to DM SERIAL for warp7 and warp7_bl33 defconfigs. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-04-19 18:34:11 +00:00
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
Convert CONFIG_MXC_UART to Kconfig This converts the following to Kconfig: CONFIG_MXC_UART Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-06-09 14:46:46 +00:00
CONFIG_MXC_UART=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:44:53 +00:00
CONFIG_OPTEE=y
configs: migrate CONFIG_IMX_THERMAL to defconfigs Done via moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-30 01:22:03 +00:00
CONFIG_IMX_THERMAL=y
usb: move CONFIG_USB_EHCI_MX7 to Kconfig Create an entry for "config USB_EHCI_MX7" in Kconfig and switch over to it for all boards. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2016-07-13 07:25:36 +00:00
CONFIG_USB=y
configs: Resync with savedefconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-08 20:11:59 +00:00
CONFIG_USB_EHCI_HCD=y
CONFIG_MXC_USB_OTG_HACTIVE=y
warp7: Move some USB configuration options to defconfig Currently it's recommended to move some configuration options to the defconfig file. Move some USB related options to the defconfig file. Signed-off-by: Breno Lima <breno.lima@nxp.com>
2016-07-22 18:29:30 +00:00
CONFIG_USB_GADGET=y
usb: gadget: Make g_dnl USB settings common The g_dnl USB settings for the vendor ID, product ID and manufacturer are actually common settings that can and should be shared by all the gadgets. Make them common by renaming them, and convert all the users. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-07 06:58:08 +00:00
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
warp7: Move some USB configuration options to defconfig Currently it's recommended to move some configuration options to the defconfig file. Move some USB related options to the defconfig file. Signed-off-by: Breno Lima <breno.lima@nxp.com>
2016-07-22 18:29:30 +00:00
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
usb: gadget: Convert USB_ETHER to Kconfig The USB Ethernet gadget option has not yet been moved to Kconfig, let's deal with that. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-06 21:23:21 +00:00
CONFIG_USB_ETHER=y
usb: gadget: usb_ether: Move the interfaces to Kconfig We need to select an interface for the usb_ether gadget, and they haven't been converted to Kconfig yet. Add a choice to make sure we have an option selected, and convert all the users. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-07 06:46:14 +00:00
CONFIG_USB_ETH_CDC=y
usb: gadget: Move USBNET_HOST_ADDR to Kconfig While the USB Ethernet device address is already defined in Kconfig, the host address isn't. Convert it. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-06 20:53:43 +00:00
CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:44:53 +00:00
CONFIG_OPTEE_LOAD_ADDR=0x84000000
optee: adjust dependencies and default values for dram We may have, the not yet considered, scenario where OPTEE is loaded before u-boot and *not* by u-boot, e.g, the boot flow using the ARM Trusted Firmware (ATF), where in the 32bit flow is: BootRom->ATF(BL2)->Optee(BL32)->u-boot(BL33) In this case we need still to reserve the memory used by optee, to avoid for example to realocate ourself to the same address at the end of DRAM. So, we change here the dependencies on the OPTEE lib and we set the default size and base of TZRAM to zero. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Ryan Harkin <ryan.harkin@linaro.org> Cc: u-boot@lists.denx.de
2018-09-05 10:56:06 +00:00
CONFIG_OPTEE_TZDRAM_SIZE=0x3000000
CONFIG_OPTEE_TZDRAM_BASE=0x9d000000
warp7: defconfig: Enable CONFIG_BOOTM_TEE This patch enables CONFIG_BOOTM_TEE. Once enabled its possible to chain-load Linux through OPTEE. Loading kernel to 0x80800000 => run loadimage Load FDT to 0x83000000 => run loadfdt Load OPTEE to 0x84000000 => fatload mmc 0:5 0x84000000 /lib/firmware/uTee.optee Then chain-load to the kernel via OPTEE => bootm 0x84000000 - 0x83000000 Image Name: Image Type: ARM Trusted Execution Environment Kernel Image (uncompressed) Data Size: 249844 Bytes = 244 KiB Load Address: 9dffffe4 Entry Point: 9e000000 Verifying Checksum ... OK Loading Kernel Image ... OK Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-24 17:46:39 +00:00
CONFIG_BOOTM_OPTEE=y
Reference in a new issue Copy permalink