u-boot/board/freescale/ls1043ardb/Kconfig


if TARGET_LS1043ARDB

config SYS_BOARD
	default "ls1043ardb"

config SYS_VENDOR
	default "freescale"

config SYS_SOC
	default "fsl-layerscape"

config SYS_CONFIG_NAME
	default "ls1043ardb"

config SYS_HAS_ARMV8_SECURE_BASE
	bool "Enable secure address for PSCI image"
	depends on ARMV8_PSCI
	default n
	help
	  PSCI image can be re-located to secure RAM.
	  If enabled, please also define the value for ARMV8_SECURE_BASE,
	  for LS1043ARDB, it could be some address in OCRAM.

source "board/freescale/common/Kconfig"

endif
armv8/ls1043ardb: Add LS1043ARDB board support LS1043ARDB Specification: ------------------------- Memory subsystem: * 2GByte DDR4 SDRAM (32bit bus) * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 16 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * XFI 10G port * QSGMII with 4x 1G ports * Two RGMII ports PCIe: * PCIe2 (Lanes C) to mini-PCIe slot * PCIe3 (Lanes D) to PCIe slot USB 3.0: two super speed USB 3.0 type A ports UART: supports two UARTs up to 115200 bps for console Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> 2015-10-26 11:47:52 +00:00
			`if TARGET_LS1043ARDB`

			`config SYS_BOARD`
			`default "ls1043ardb"`

			`config SYS_VENDOR`
			`default "freescale"`

			`config SYS_SOC`
			`default "fsl-layerscape"`

			`config SYS_CONFIG_NAME`
			`default "ls1043ardb"`

ARMv8: LS1043A: Enable LS1043A default PSCI support A most basic PSCI implementation with only one psci_version is added for LS1043A, this can verify the generic PSCI framework, and more platform specific implementation will be added later. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com> 2016-12-08 03:58:26 +00:00			`config SYS_HAS_ARMV8_SECURE_BASE`
			`bool "Enable secure address for PSCI image"`
			`depends on ARMV8_PSCI`
			`default n`
			`help`
			`PSCI image can be re-located to secure RAM.`
			`If enabled, please also define the value for ARMV8_SECURE_BASE,`
			`for LS1043ARDB, it could be some address in OCRAM.`

NXP: Introduce board/freescale/common/Kconfig and migrate CHAIN_OF_TRUST Introduce board/freescale/common/Kconfig so that we have a single place for CONFIG options that are shared between ARM and PowerPC NXP platforms. Cc: York Sun <york.sun@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com> 2017-01-23 00:43:10 +00:00			`source "board/freescale/common/Kconfig"`

armv8/ls1043ardb: Add LS1043ARDB board support LS1043ARDB Specification: ------------------------- Memory subsystem: * 2GByte DDR4 SDRAM (32bit bus) * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 16 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * XFI 10G port * QSGMII with 4x 1G ports * Two RGMII ports PCIe: * PCIe2 (Lanes C) to mini-PCIe slot * PCIe3 (Lanes D) to PCIe slot USB 3.0: two super speed USB 3.0 type A ports UART: supports two UARTs up to 115200 bps for console Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> 2015-10-26 11:47:52 +00:00			`endif`