u-boot/include/mvebu_mmc.h

268 lines
7.5 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Marvell MMC/SD/SDIO driver
*
* (C) Copyright 2012
* Marvell Semiconductor <www.marvell.com>
* Written-by: Maen Suleiman, Gerald Kerma
*/
#ifndef __MVEBU_MMC_H__
#define __MVEBU_MMC_H__
/* needed for the mmc_cfg definition */
#include <mmc.h>
#define MMC_BLOCK_SIZE 512
/*
* Clock rates
*/
#define MVEBU_MMC_CLOCKRATE_MAX 50000000
#define MVEBU_MMC_BASE_DIV_MAX 0x7ff
#define MVEBU_MMC_BASE_FAST_CLOCK CFG_SYS_TCLK
#define MVEBU_MMC_BASE_FAST_CLK_100 100000000
#define MVEBU_MMC_BASE_FAST_CLK_200 200000000
/* SDIO register */
#define SDIO_SYS_ADDR_LOW 0x000
#define SDIO_SYS_ADDR_HI 0x004
#define SDIO_BLK_SIZE 0x008
#define SDIO_BLK_COUNT 0x00c
#define SDIO_ARG_LOW 0x010
#define SDIO_ARG_HI 0x014
#define SDIO_XFER_MODE 0x018
#define SDIO_CMD 0x01c
#define SDIO_RSP(i) (0x020 + ((i)<<2))
#define SDIO_RSP0 0x020
#define SDIO_RSP1 0x024
#define SDIO_RSP2 0x028
#define SDIO_RSP3 0x02c
#define SDIO_RSP4 0x030
#define SDIO_RSP5 0x034
#define SDIO_RSP6 0x038
#define SDIO_RSP7 0x03c
#define SDIO_BUF_DATA_PORT 0x040
#define SDIO_RSVED 0x044
#define SDIO_HW_STATE 0x048
#define SDIO_PRESENT_STATE0 0x048
#define SDIO_PRESENT_STATE1 0x04c
#define SDIO_HOST_CTRL 0x050
#define SDIO_BLK_GAP_CTRL 0x054
#define SDIO_CLK_CTRL 0x058
#define SDIO_SW_RESET 0x05c
#define SDIO_NOR_INTR_STATUS 0x060
#define SDIO_ERR_INTR_STATUS 0x064
#define SDIO_NOR_STATUS_EN 0x068
#define SDIO_ERR_STATUS_EN 0x06c
#define SDIO_NOR_INTR_EN 0x070
#define SDIO_ERR_INTR_EN 0x074
#define SDIO_AUTOCMD12_ERR_STATUS 0x078
#define SDIO_CURR_BYTE_LEFT 0x07c
#define SDIO_CURR_BLK_LEFT 0x080
#define SDIO_AUTOCMD12_ARG_LOW 0x084
#define SDIO_AUTOCMD12_ARG_HI 0x088
#define SDIO_AUTOCMD12_INDEX 0x08c
#define SDIO_AUTO_RSP(i) (0x090 + ((i)<<2))
#define SDIO_AUTO_RSP0 0x090
#define SDIO_AUTO_RSP1 0x094
#define SDIO_AUTO_RSP2 0x098
#define SDIO_CLK_DIV 0x128
#define WINDOW_CTRL(i) (0x108 + ((i) << 3))
#define WINDOW_BASE(i) (0x10c + ((i) << 3))
/* SDIO_PRESENT_STATE */
#define CARD_BUSY (1 << 1)
#define CMD_INHIBIT (1 << 0)
#define CMD_TXACTIVE (1 << 8)
#define CMD_RXACTIVE (1 << 9)
#define CMD_FIFO_EMPTY (1 << 13)
#define CMD_AUTOCMD12ACTIVE (1 << 14)
#define CMD_BUS_BUSY (CMD_AUTOCMD12ACTIVE | \
CMD_RXACTIVE | \
CMD_TXACTIVE | \
CMD_INHIBIT | \
CARD_BUSY)
/*
* SDIO_CMD
*/
#define SDIO_CMD_RSP_NONE (0 << 0)
#define SDIO_CMD_RSP_136 (1 << 0)
#define SDIO_CMD_RSP_48 (2 << 0)
#define SDIO_CMD_RSP_48BUSY (3 << 0)
#define SDIO_CMD_CHECK_DATACRC16 (1 << 2)
#define SDIO_CMD_CHECK_CMDCRC (1 << 3)
#define SDIO_CMD_INDX_CHECK (1 << 4)
#define SDIO_CMD_DATA_PRESENT (1 << 5)
#define SDIO_UNEXPECTED_RESP (1 << 7)
#define SDIO_CMD_INDEX(x) ((x) << 8)
/*
* SDIO_XFER_MODE
*/
#define SDIO_XFER_MODE_STOP_CLK (1 << 5)
#define SDIO_XFER_MODE_HW_WR_DATA_EN (1 << 1)
#define SDIO_XFER_MODE_AUTO_CMD12 (1 << 2)
#define SDIO_XFER_MODE_INT_CHK_EN (1 << 3)
#define SDIO_XFER_MODE_TO_HOST (1 << 4)
#define SDIO_XFER_MODE_DMA (0 << 6)
/*
* SDIO_HOST_CTRL
*/
#define SDIO_HOST_CTRL_PUSH_PULL_EN (1 << 0)
#define SDIO_HOST_CTRL_CARD_TYPE_MEM_ONLY (0 << 1)
#define SDIO_HOST_CTRL_CARD_TYPE_IO_ONLY (1 << 1)
#define SDIO_HOST_CTRL_CARD_TYPE_IO_MEM_COMBO (2 << 1)
#define SDIO_HOST_CTRL_CARD_TYPE_IO_MMC (3 << 1)
#define SDIO_HOST_CTRL_CARD_TYPE_MASK (3 << 1)
#define SDIO_HOST_CTRL_BIG_ENDIAN (1 << 3)
#define SDIO_HOST_CTRL_LSB_FIRST (1 << 4)
#define SDIO_HOST_CTRL_DATA_WIDTH_1_BIT (0 << 9)
#define SDIO_HOST_CTRL_DATA_WIDTH_4_BITS (1 << 9)
#define SDIO_HOST_CTRL_HI_SPEED_EN (1 << 10)
#define SDIO_HOST_CTRL_TMOUT_MAX 0xf
#define SDIO_HOST_CTRL_TMOUT_MASK (0xf << 11)
#define SDIO_HOST_CTRL_TMOUT(x) ((x) << 11)
#define SDIO_HOST_CTRL_TMOUT_EN (1 << 15)
/*
* SDIO_SW_RESET
*/
#define SDIO_SW_RESET_NOW (1 << 8)
/*
* Normal interrupt status bits
*/
#define SDIO_NOR_ERROR (1 << 15)
#define SDIO_NOR_UNEXP_RSP (1 << 14)
#define SDIO_NOR_AUTOCMD12_DONE (1 << 13)
#define SDIO_NOR_SUSPEND_ON (1 << 12)
#define SDIO_NOR_LMB_FF_8W_AVAIL (1 << 11)
#define SDIO_NOR_LMB_FF_8W_FILLED (1 << 10)
#define SDIO_NOR_READ_WAIT_ON (1 << 9)
#define SDIO_NOR_CARD_INT (1 << 8)
#define SDIO_NOR_READ_READY (1 << 5)
#define SDIO_NOR_WRITE_READY (1 << 4)
#define SDIO_NOR_DMA_INI (1 << 3)
#define SDIO_NOR_BLK_GAP_EVT (1 << 2)
#define SDIO_NOR_XFER_DONE (1 << 1)
#define SDIO_NOR_CMD_DONE (1 << 0)
/*
* Error status bits
*/
#define SDIO_ERR_CRC_STATUS (1 << 14)
#define SDIO_ERR_CRC_STARTBIT (1 << 13)
#define SDIO_ERR_CRC_ENDBIT (1 << 12)
#define SDIO_ERR_RESP_TBIT (1 << 11)
#define SDIO_ERR_XFER_SIZE (1 << 10)
#define SDIO_ERR_CMD_STARTBIT (1 << 9)
#define SDIO_ERR_AUTOCMD12 (1 << 8)
#define SDIO_ERR_DATA_ENDBIT (1 << 6)
#define SDIO_ERR_DATA_CRC (1 << 5)
#define SDIO_ERR_DATA_TIMEOUT (1 << 4)
#define SDIO_ERR_CMD_INDEX (1 << 3)
#define SDIO_ERR_CMD_ENDBIT (1 << 2)
#define SDIO_ERR_CMD_CRC (1 << 1)
#define SDIO_ERR_CMD_TIMEOUT (1 << 0)
/* enable all for polling */
#define SDIO_POLL_MASK 0xffff
/*
* CMD12 error status bits
*/
#define SDIO_AUTOCMD12_ERR_NOTEXE (1 << 0)
#define SDIO_AUTOCMD12_ERR_TIMEOUT (1 << 1)
#define SDIO_AUTOCMD12_ERR_CRC (1 << 2)
#define SDIO_AUTOCMD12_ERR_ENDBIT (1 << 3)
#define SDIO_AUTOCMD12_ERR_INDEX (1 << 4)
#define SDIO_AUTOCMD12_ERR_RESP_T_BIT (1 << 5)
#define SDIO_AUTOCMD12_ERR_RESP_STARTBIT (1 << 6)
#define MMC_RSP_PRESENT (1 << 0)
/* 136 bit response */
#define MMC_RSP_136 (1 << 1)
/* expect valid crc */
#define MMC_RSP_CRC (1 << 2)
/* card may send busy */
#define MMC_RSP_BUSY (1 << 3)
/* response contains opcode */
#define MMC_RSP_OPCODE (1 << 4)
#define MMC_BUSMODE_OPENDRAIN 1
#define MMC_BUSMODE_PUSHPULL 2
#define MMC_BUS_WIDTH_1 0
#define MMC_BUS_WIDTH_4 2
#define MMC_BUS_WIDTH_8 3
/* Can the host do 4 bit transfers */
#define MMC_CAP_4_BIT_DATA (1 << 0)
/* Can do MMC high-speed timing */
#define MMC_CAP_MMC_HIGHSPEED (1 << 1)
/* Can do SD high-speed timing */
#define MMC_CAP_SD_HIGHSPEED (1 << 2)
/* Can signal pending SDIO IRQs */
#define MMC_CAP_SDIO_IRQ (1 << 3)
/* Talks only SPI protocols */
#define MMC_CAP_SPI (1 << 4)
/* Can the host do 8 bit transfers */
#define MMC_CAP_8_BIT_DATA (1 << 6)
/* Waits while card is busy */
#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9)
/* Allow erase/trim commands */
#define MMC_CAP_ERASE (1 << 10)
/* can support DDR mode at 1.8V */
#define MMC_CAP_1_8V_DDR (1 << 11)
/* can support DDR mode at 1.2V */
#define MMC_CAP_1_2V_DDR (1 << 12)
/* Can power off after boot */
#define MMC_CAP_POWER_OFF_CARD (1 << 13)
/* CMD14/CMD19 bus width ok */
#define MMC_CAP_BUS_WIDTH_TEST (1 << 14)
/* Host supports UHS SDR12 mode */
#define MMC_CAP_UHS_SDR12 (1 << 15)
/* Host supports UHS SDR25 mode */
#define MMC_CAP_UHS_SDR25 (1 << 16)
/* Host supports UHS SDR50 mode */
#define MMC_CAP_UHS_SDR50 (1 << 17)
/* Host supports UHS SDR104 mode */
#define MMC_CAP_UHS_SDR104 (1 << 18)
/* Host supports UHS DDR50 mode */
#define MMC_CAP_UHS_DDR50 (1 << 19)
/* Host supports Driver Type A */
#define MMC_CAP_DRIVER_TYPE_A (1 << 23)
/* Host supports Driver Type C */
#define MMC_CAP_DRIVER_TYPE_C (1 << 24)
/* Host supports Driver Type D */
#define MMC_CAP_DRIVER_TYPE_D (1 << 25)
/* CMD23 supported. */
#define MMC_CAP_CMD23 (1 << 30)
/* Hardware reset */
#define MMC_CAP_HW_RESET (1 << 31)
struct mvebu_mmc_plat {
void *iobase;
struct mmc_config cfg;
struct mmc mmc;
};
#endif /* __MVEBU_MMC_H__ */