mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
267 lines
6.5 KiB
Text
267 lines
6.5 KiB
Text
|
// SPDX-License-Identifier: (GPL-2.0)
|
||
|
/*
|
||
|
* support for the imx6 based aristainetos2b board
|
||
|
*
|
||
|
* Copyright (C) 2019 Heiko Schocher <hs@denx.de>
|
||
|
* Copyright (C) 2015 Heiko Schocher <hs@denx.de>
|
||
|
*
|
||
|
*/
|
||
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
#include <dt-bindings/clock/imx6qdl-clock.h>
|
||
|
|
||
|
#include "imx6qdl-aristainetos2-common.dtsi"
|
||
|
|
||
|
/ {
|
||
|
leds {
|
||
|
compatible = "gpio-leds";
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_gpio>;
|
||
|
|
||
|
LED_blue {
|
||
|
label = "led_blue";
|
||
|
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
|
||
|
};
|
||
|
|
||
|
LED_green {
|
||
|
label = "led_green";
|
||
|
gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
|
||
|
};
|
||
|
|
||
|
LED_red {
|
||
|
label = "led_red";
|
||
|
gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
|
||
|
};
|
||
|
|
||
|
LED_yellow {
|
||
|
label = "led_yellow";
|
||
|
gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
|
||
|
};
|
||
|
|
||
|
LED_ena {
|
||
|
label = "led_ena";
|
||
|
gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&ecspi1 {
|
||
|
fsl,spi-num-chipselects = <3>;
|
||
|
cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH
|
||
|
&gpio4 10 GPIO_ACTIVE_HIGH
|
||
|
&gpio4 11 GPIO_ACTIVE_HIGH>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
||
|
status = "okay";
|
||
|
pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
|
||
|
pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
|
||
|
|
||
|
flash: m25p80@0 {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
compatible = "micron,n25q128a11", "jedec,spi-nor";
|
||
|
spi-max-frequency = <20000000>;
|
||
|
reg = <0>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&ecspi4 {
|
||
|
fsl,spi-num-chipselects = <2>;
|
||
|
cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_ecspi4>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&i2c1 {
|
||
|
tpm@20 {
|
||
|
compatible = "infineon,slb9645tt";
|
||
|
reg = <0x20>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&gpio7 {
|
||
|
sd2_driver_ena {
|
||
|
gpio-hog;
|
||
|
output-high;
|
||
|
gpios = <8 GPIO_ACTIVE_HIGH>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&gpmi {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&can1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_flexcan1>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&can2 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_flexcan2>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usdhc1 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
||
|
cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
|
||
|
wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
|
||
|
no-1-8-v;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usdhc2 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
||
|
/*
|
||
|
* comment out this line to make the WiFi Eval-Module work in
|
||
|
* SD-Slot2, and add line:
|
||
|
* broken-cd;
|
||
|
* causes 6% CPU load if no WiFi module installed (polling)
|
||
|
*/
|
||
|
cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
|
||
|
wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
|
||
|
no-1-8-v;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&iomuxc {
|
||
|
pinctrl_ecspi1: ecspi1grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
||
|
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
||
|
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
||
|
/* SS0# */
|
||
|
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
|
||
|
/* SS1# */
|
||
|
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
|
||
|
/* SS2# */
|
||
|
MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1
|
||
|
/* WP pin NOR Flash */
|
||
|
MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0
|
||
|
/* Flash nReset */
|
||
|
MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_ecspi4: ecspi4grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
|
||
|
MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
|
||
|
MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
|
||
|
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */
|
||
|
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_gpio: gpiogrp {
|
||
|
fsl,pins = <
|
||
|
/* led enable */
|
||
|
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0
|
||
|
/* LCD power enable */
|
||
|
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0
|
||
|
/* led yellow */
|
||
|
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0
|
||
|
/* led red */
|
||
|
MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0
|
||
|
/* led green */
|
||
|
MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0
|
||
|
/* led blue */
|
||
|
MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0
|
||
|
/* Profibus IRQ */
|
||
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
|
||
|
/* FPGA IRQ currently unused*/
|
||
|
MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0
|
||
|
/* Display reset because of clock failure */
|
||
|
MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0
|
||
|
/* spi bus #2 SS driver enable */
|
||
|
MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0
|
||
|
/* RST_LOC# PHY reset input (has pull-down!)*/
|
||
|
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0
|
||
|
/* Touchscreen IRQ */
|
||
|
MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
|
||
|
/* PCIe reset */
|
||
|
MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0
|
||
|
/* make sure pin is GPIO and not ENET_REF_CLK */
|
||
|
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0
|
||
|
/* SD2 level shifter output enable / SD2 Reset# */
|
||
|
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x4001b0b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_gpmi_nand: gpmi-nand {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
||
|
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
||
|
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
||
|
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
||
|
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
||
|
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
||
|
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
||
|
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
||
|
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
||
|
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
||
|
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
||
|
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
||
|
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
||
|
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
||
|
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_flexcan1: flexcan1grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
|
||
|
MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_flexcan2: flexcan2grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
|
||
|
MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usbotg: usbotggrp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
|
||
|
MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc1: usdhc1grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
|
||
|
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
|
||
|
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
|
||
|
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
|
||
|
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
|
||
|
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
|
||
|
/* SD1 card detect input */
|
||
|
MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
|
||
|
/* SD1 write protect input */
|
||
|
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
pinctrl_usdhc2: usdhc2grp {
|
||
|
fsl,pins = <
|
||
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71
|
||
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71
|
||
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
|
||
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
|
||
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
|
||
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
|
||
|
/* SD2 card detect input */
|
||
|
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
|
||
|
/* SD2 write protect input */
|
||
|
MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
|
||
|
>;
|
||
|
};
|
||
|
};
|