u-boot/common/cmd_disk.c

129 lines
3 KiB
C
Raw Normal View History

/*
* (C) Copyright 2000-2011
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <part.h>
#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_SCSI) || \
defined(CONFIG_USB_STORAGE)
int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,
char *const argv[])
{
int dev, part;
ulong addr = CONFIG_SYS_LOAD_ADDR;
ulong cnt;
disk_partition_t info;
image_header_t *hdr;
block_dev_desc_t *dev_desc;
#if defined(CONFIG_FIT)
const void *fit_hdr = NULL;
#endif
bootstage_mark(BOOTSTAGE_ID_IDE_START);
if (argc > 3) {
bootstage_error(BOOTSTAGE_ID_IDE_ADDR);
return CMD_RET_USAGE;
}
bootstage_mark(BOOTSTAGE_ID_IDE_ADDR);
if (argc > 1)
addr = simple_strtoul(argv[1], NULL, 16);
bootstage_mark(BOOTSTAGE_ID_IDE_BOOT_DEVICE);
part = get_device_and_partition(intf, (argc == 3) ? argv[2] : NULL,
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
&dev_desc, &info, 1);
if (part < 0) {
bootstage_error(BOOTSTAGE_ID_IDE_TYPE);
return 1;
}
dev = dev_desc->dev;
bootstage_mark(BOOTSTAGE_ID_IDE_TYPE);
printf("\nLoading from %s device %d, partition %d: "
"Name: %.32s Type: %.32s\n", intf, dev, part, info.name,
info.type);
debug("First Block: " LBAFU ", # of blocks: " LBAFU
", Block Size: %ld\n",
info.start, info.size, info.blksz);
if (dev_desc->block_read(dev, info.start, 1, (ulong *) addr) != 1) {
printf("** Read error on %d:%d\n", dev, part);
bootstage_error(BOOTSTAGE_ID_IDE_PART_READ);
return 1;
}
bootstage_mark(BOOTSTAGE_ID_IDE_PART_READ);
switch (genimg_get_format((void *) addr)) {
case IMAGE_FORMAT_LEGACY:
hdr = (image_header_t *) addr;
bootstage_mark(BOOTSTAGE_ID_IDE_FORMAT);
if (!image_check_hcrc(hdr)) {
puts("\n** Bad Header Checksum **\n");
bootstage_error(BOOTSTAGE_ID_IDE_CHECKSUM);
return 1;
}
bootstage_mark(BOOTSTAGE_ID_IDE_CHECKSUM);
image_print_contents(hdr);
cnt = image_get_image_size(hdr);
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
fit_hdr = (const void *) addr;
puts("Fit image detected...\n");
cnt = fit_get_size(fit_hdr);
break;
#endif
default:
bootstage_error(BOOTSTAGE_ID_IDE_FORMAT);
puts("** Unknown image type\n");
return 1;
}
cnt += info.blksz - 1;
cnt /= info.blksz;
cnt -= 1;
if (dev_desc->block_read(dev, info.start + 1, cnt,
(ulong *)(addr + info.blksz)) != cnt) {
printf("** Read error on %d:%d\n", dev, part);
bootstage_error(BOOTSTAGE_ID_IDE_READ);
return 1;
}
bootstage_mark(BOOTSTAGE_ID_IDE_READ);
#if defined(CONFIG_FIT)
/* This cannot be done earlier,
* we need complete FIT image in RAM first */
if (genimg_get_format((void *) addr) == IMAGE_FORMAT_FIT) {
if (!fit_check_format(fit_hdr)) {
bootstage_error(BOOTSTAGE_ID_IDE_FIT_READ);
puts("** Bad FIT image format\n");
return 1;
}
bootstage_mark(BOOTSTAGE_ID_IDE_FIT_READ_OK);
fit_print_contents(fit_hdr);
}
#endif
flush_cache(addr, (cnt+1)*info.blksz);
/* Loading ok, update default load address */
load_addr = addr;
return bootm_maybe_autostart(cmdtp, argv[0]);
}
#endif