u-boot/board/altera/nios2-generic/Makefile

#
# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#

include $(TOPDIR)/config.mk
ifneq ($(OBJTREE),$(SRCTREE))
$(shell mkdir -p $(obj)../common)
endif

LIB	= $(obj)lib$(BOARD).a

COBJS-y	:= $(BOARD).o
COBJS-$(CONFIG_CMD_IDE) += ../common/cfide.o
COBJS-$(CONFIG_EPLED) += ../common/epled.o
COBJS-$(CONFIG_GPIO) += gpio.o
COBJS-$(CONFIG_SEVENSEG) += ../common/sevenseg.o

SOBJS-y	:= text_base.o

SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS	:= $(addprefix $(obj),$(COBJS-y))
SOBJS	:= $(addprefix $(obj),$(SOBJS-y))

$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)

clean:
	rm -f $(SOBJS) $(OBJS)

distclean:	clean
	rm -f $(LIB) core *.bak $(obj).depend

#########################################################################

# defines $(obj).depend target
include $(SRCTREE)/rules.mk

sinclude $(obj).depend

#########################################################################
nios2: add nios2-generic board This is a generic approach to port u-boot for nios2 boards. You may find the usage of this approach on the nioswiki, http://nioswiki.com/DasUBoot A fpga parameter file, which contains base address information and drivers declaration, is generated from Altera's hardware system description sopc file using tools. The example fpga parameter file is compatible with EP1C20, EP1S10 and EP1S40 boards. So these boards can be removed after this commit. Though epcs controller is removed to cut the dependency of altera_spi driver. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com> 2010-04-21 00:40:59 +00:00			`#`
			`# (C) Copyright 2001-2006`
			`# Wolfgang Denk, DENX Software Engineering, wd@denx.de.`
			`# (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>`
			`#`
			`# See file CREDITS for list of people who contributed to this`
			`# project.`
			`#`
			`# This program is free software; you can redistribute it and/or`
			`# modify it under the terms of the GNU General Public License as`
			`# published by the Free Software Foundation; either version 2 of`
			`# the License, or (at your option) any later version.`
			`#`
			`# This program is distributed in the hope that it will be useful,`
			`# but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`# GNU General Public License for more details.`
			`#`
			`# You should have received a copy of the GNU General Public License`
			`# along with this program; if not, write to the Free Software`
			`# Foundation, Inc., 59 Temple Place, Suite 330, Boston,`
			`# MA 02111-1307 USA`
			`#`

			`include $(TOPDIR)/config.mk`
			`ifneq ($(OBJTREE),$(SRCTREE))`
			`$(shell mkdir -p $(obj)../common)`
			`endif`

			`LIB = $(obj)lib$(BOARD).a`

			`COBJS-y := $(BOARD).o`
			`COBJS-$(CONFIG_CMD_IDE) += ../common/cfide.o`
			`COBJS-$(CONFIG_EPLED) += ../common/epled.o`
nios2: add gpio support to nios2-generic board This patch adds gpio support of Altera PIO component to the nios2-generic board. Though it drives only gpio_led at the moment, it supports bidirectional port to control bit-banging I2C, NAND flash busy status or button switches, etc. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Tested-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Scott McNutt <smcnutt@psyent.com> 2010-04-30 03:34:15 +00:00			`COBJS-$(CONFIG_GPIO) += gpio.o`
nios2: add nios2-generic board This is a generic approach to port u-boot for nios2 boards. You may find the usage of this approach on the nioswiki, http://nioswiki.com/DasUBoot A fpga parameter file, which contains base address information and drivers declaration, is generated from Altera's hardware system description sopc file using tools. The example fpga parameter file is compatible with EP1C20, EP1S10 and EP1S40 boards. So these boards can be removed after this commit. Though epcs controller is removed to cut the dependency of altera_spi driver. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com> 2010-04-21 00:40:59 +00:00			`COBJS-$(CONFIG_SEVENSEG) += ../common/sevenseg.o`

			`SOBJS-y := text_base.o`

			`SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)`
			`OBJS := $(addprefix $(obj),$(COBJS-y))`
			`SOBJS := $(addprefix $(obj),$(SOBJS-y))`

			`$(LIB): $(obj).depend $(OBJS) $(SOBJS)`
			`$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)`

			`clean:`
			`rm -f $(SOBJS) $(OBJS)`

			`distclean: clean`
			`rm -f $(LIB) core *.bak $(obj).depend`

			`#########################################################################`

			`# defines $(obj).depend target`
			`include $(SRCTREE)/rules.mk`

			`sinclude $(obj).depend`

			`#########################################################################`