mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
33 lines
832 B
Text
33 lines
832 B
Text
|
How to use U-boot on Freescale MX6UL 14x14 EVK
|
||
|
|
-----------------------------------------------
|
||
|
|
|
||
|
|
- Build U-boot for MX6UL 14x14 EVK:
|
||
|
|
|
||
|
|
$ make mrproper
|
||
|
|
$ make mx6ul_14x14_evk_defconfig
|
||
|
|
$ make
|
||
|
|
|
||
|
|
This will generate the SPL image called SPL and the u-boot.img.
|
||
|
|
|
||
|
|
- Flash the SPL image into the micro SD card:
|
||
|
|
|
||
|
|
sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
|
||
|
|
|
||
|
|
- Flash the u-boot.img image into the micro SD card:
|
||
|
|
|
||
|
|
sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
|
||
|
|
|
||
|
|
- Jumper settings:
|
||
|
|
|
||
|
|
SW601: 0 0 1 0
|
||
|
|
Sw602: 1 0
|
||
|
|
|
||
|
|
where 0 means bottom position and 1 means top position (from the
|
||
|
|
switch label numbers reference).
|
||
|
|
|
||
|
|
- Connect the USB cable between the EVK and the PC for the console.
|
||
|
|
(The USB console connector is the one close the push buttons)
|
||
|
|
|
||
|
|
- Insert the micro SD card in the board, power it up and U-boot messages should
|
||
|
|
come up.
|