u-boot/board/siemens/capricorn/Kconfig

if TARGET_GIEDI

config SYS_BOARD
	default "capricorn"

config SYS_VENDOR
	default "siemens"

config SYS_CONFIG_NAME
	default "giedi"

config IMX_CONFIG
	default "board/siemens/capricorn/imximage.cfg"
endif

if TARGET_DENEB

config SYS_BOARD
	default "capricorn"

config SYS_VENDOR
	default "siemens"

config SYS_CONFIG_NAME
	default "deneb"

config IMX_CONFIG
	default "board/siemens/capricorn/imximage.cfg"

endif
imx: add imx8x capricorn giedi board Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de> 2020-01-07 15:37:42 +00:00			`if TARGET_GIEDI`

			`config SYS_BOARD`
			`default "capricorn"`

			`config SYS_VENDOR`
			`default "siemens"`

			`config SYS_CONFIG_NAME`
			`default "giedi"`

imx: Finish migration of IMX_CONFIG to Kconfig - Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-25 00:41:00 +00:00			`config IMX_CONFIG`
			`default "board/siemens/capricorn/imximage.cfg"`
imx: add imx8x capricorn giedi board Add support for i.MX8X based Capricorn Giedi SoM. Supported interfaces: GPIO, ENET, eMMC, I2C, UART. Console output: U-Boot SPL 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) Trying to boot from MMC1 Load image from MMC/SD 0x3e400 U-Boot 2020.01-00003-gfd1c98f (Jan 07 2020 - 15:51:25 +0100) ##v01.07 CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C Model: Siemens Giedi Board: Capricorn Boot: MMC0 DRAM: 1022 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@5a080000 Out: serial@5a080000 Err: serial@5a080000 Net: eth1: ethernet@5b050000 [PRIME] Autobooting in 1 seconds, press "<Esc><Esc>" to stop Signed-off-by: Anatolij Gustschin <agust@denx.de> 2020-01-07 15:37:42 +00:00			`endif`
imx: add imx8x based deneb board Add support for Capricorn Deneb SoM variant. Signed-off-by: Anatolij Gustschin <agust@denx.de> 2020-01-07 15:37:43 +00:00
			`if TARGET_DENEB`

			`config SYS_BOARD`
			`default "capricorn"`

			`config SYS_VENDOR`
			`default "siemens"`

			`config SYS_CONFIG_NAME`
			`default "deneb"`

imx: Finish migration of IMX_CONFIG to Kconfig - Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-25 00:41:00 +00:00			`config IMX_CONFIG`
			`default "board/siemens/capricorn/imximage.cfg"`

imx: add imx8x based deneb board Add support for Capricorn Deneb SoM variant. Signed-off-by: Anatolij Gustschin <agust@denx.de> 2020-01-07 15:37:43 +00:00			`endif`