u-boot/include/configs/pcm052.h

260 lines
7.7 KiB
C
Raw Normal View History

/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Configuration settings for the phytec PCM-052 SoM.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch/imx-regs.h>
#define CONFIG_SKIP_LOWLEVEL_INIT
/* Enable passing of ATAGs */
#define CONFIG_CMDLINE_TAG
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_SYS_NAND_ONFI_DETECTION
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
#define CONFIG_JFFS2_NAND
/* UBI */
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_LZO
/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#ifndef MTDIDS_DEFAULT
#define MTDIDS_DEFAULT "nand0=NAND"
#endif
#ifndef MTDPARTS_DEFAULT
#define MTDPARTS_DEFAULT "mtdparts=NAND:640k(bootloader)"\
",128k(env1)"\
",128k(env2)"\
",128k(dtb)"\
",6144k(kernel)"\
",-(root)"
#endif
#endif
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 1
/*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
/* QSPI Configs*/
#ifdef CONFIG_FSL_QSPI
#define FSL_QSPI_FLASH_SIZE (1 << 24)
#define FSL_QSPI_FLASH_NUM 2
#define CONFIG_SYS_FSL_QSPI_LE
#endif
/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC_I2C3
#define CONFIG_SYS_I2C_MXC
/* RTC (actually an RV-4162 but M41T62-compatible) */
#define CONFIG_CMD_DATE
#define CONFIG_RTC_M41T62
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#define CONFIG_SYS_RTC_BUS_NUM 2
/* EEPROM (24FC256) */
#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_EEPROM_BUS 2
#define CONFIG_LOADADDR 0x82000000
/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE 0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT 524288
/* if no target-specific extra environment settings were defined by the
target, define an empty one */
#ifndef PCM052_EXTRA_ENV_SETTINGS
#define PCM052_EXTRA_ENV_SETTINGS
#endif
/* if no target-specific boot command was defined by the target,
define an empty one */
#ifndef PCM052_BOOTCOMMAND
#define PCM052_BOOTCOMMAND
#endif
/* if no target-specific extra environment settings were defined by the
target, define an empty one */
#ifndef PCM052_NET_INIT
#define PCM052_NET_INIT
#endif
/* boot command, including the target-defined one if any */
#define CONFIG_BOOTCOMMAND PCM052_BOOTCOMMAND "run bootcmd_nand"
/* Extra env settings (including the target-defined ones if any) */
#define CONFIG_EXTRA_ENV_SETTINGS \
PCM052_EXTRA_ENV_SETTINGS \
"autoload=no\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"blimg_file=u-boot.vyb\0" \
"blimg_addr=0x81000000\0" \
"kernel_file=zImage\0" \
"kernel_addr=0x82000000\0" \
"fdt_file=zImage.dtb\0" \
"fdt_addr=0x81000000\0" \
"ram_file=uRamdisk\0" \
"ram_addr=0x83000000\0" \
"filesys=rootfs.ubifs\0" \
"sys_addr=0x81000000\0" \
"tftploc=/path/to/tftp/directory/\0" \
"nfs_root=/path/to/nfs/root\0" \
"tftptimeout=1000\0" \
"tftptimeoutcountmax=1000000\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"bootargs_base=setenv bootargs rw " \
" mem=" __stringify(CONFIG_PCM052_DDR_SIZE) "M " \
"console=ttyLP1,115200n8\0" \
"bootargs_sd=setenv bootargs ${bootargs} " \
"root=/dev/mmcblk0p2 rootwait\0" \
"bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \
"nfsroot=${serverip}:${nfs_root},v3,tcp\0" \
"bootargs_nand=setenv bootargs ${bootargs} " \
"ubi.mtd=5 rootfstype=ubifs root=ubi0:rootfs\0" \
"bootargs_ram=setenv bootargs ${bootargs} " \
"root=/dev/ram rw initrd=${ram_addr}\0" \
"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \
"fatload mmc 0:1 ${kernel_addr} ${kernel_file}; " \
"fatload mmc 0:1 ${fdt_addr} ${fdt_file}; " \
"bootz ${kernel_addr} - ${fdt_addr}\0" \
"bootcmd_net=run bootargs_base bootargs_net bootargs_mtd; " \
"tftpboot ${kernel_addr} ${tftpdir}${kernel_file}; " \
"tftpboot ${fdt_addr} ${tftpdir}${fdt_file}; " \
"bootz ${kernel_addr} - ${fdt_addr}\0" \
"bootcmd_nand=run bootargs_base bootargs_nand bootargs_mtd; " \
"nand read ${fdt_addr} dtb; " \
"nand read ${kernel_addr} kernel; " \
"bootz ${kernel_addr} - ${fdt_addr}\0" \
"bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
"nand read ${fdt_addr} dtb; " \
"nand read ${kernel_addr} kernel; " \
"nand read ${ram_addr} root; " \
"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
"update_bootloader_from_tftp=" PCM052_NET_INIT \
"if tftp ${blimg_addr} "\
"${tftpdir}${blimg_file}; then " \
"mtdparts default; " \
"nand erase.part bootloader; " \
"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
"update_kernel_from_sd=if fatload mmc 0:2 ${kernel_addr} " \
"${kernel_file}; " \
"then mtdparts default; " \
"nand erase.part kernel; " \
"nand write ${kernel_addr} kernel ${filesize}; " \
"if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \
"nand erase.part dtb; " \
"nand write ${fdt_addr} dtb ${filesize}; fi\0" \
"update_kernel_from_tftp=" PCM052_NET_INIT \
"if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
"then setenv fdtsize ${filesize}; " \
"if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \
"mtdparts default; " \
"nand erase.part dtb; " \
"nand write ${fdt_addr} dtb ${fdtsize}; " \
"nand erase.part kernel; " \
"nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \
"update_rootfs_from_tftp=" PCM052_NET_INIT \
"if tftp ${sys_addr} ${tftpdir}${filesys}; " \
"then mtdparts default; " \
"nand erase.part root; " \
"ubi part root; " \
"ubi create rootfs; " \
"ubi write ${sys_addr} rootfs ${filesize}; fi\0" \
"update_ramdisk_from_tftp=" PCM052_NET_INIT \
"if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
"then mtdparts default; " \
"nand erase.part root; " \
"nand write ${ram_addr} root ${filesize}; fi\0"
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MEMTEST_START 0x80010000
#define CONFIG_SYS_MEMTEST_END 0x87C00000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)
#define PHYS_SDRAM_SIZE (CONFIG_PCM052_DDR_SIZE * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
flash: complete CONFIG_SYS_NO_FLASH move with renaming We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-11 13:43:54 +00:00
/* environment organization */
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
#endif
#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_ENV_OFFSET 0xA0000
#define CONFIG_ENV_SIZE_REDUND (8 * 1024)
#define CONFIG_ENV_OFFSET_REDUND 0xC0000
#endif
#endif