u-boot/include/configs/AR405.h

264 lines
9.5 KiB
C
Raw Normal View History

2002-09-18 09:04:55 +00:00
/*
2004-09-16 12:34:51 +00:00
* (C) Copyright 2001-2004
2002-09-18 09:04:55 +00:00
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
#define CONFIG_AR405 1 /* ...on a AR405 board */
2002-09-18 09:04:55 +00:00
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
2002-09-18 09:04:55 +00:00
#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
2002-09-18 09:04:55 +00:00
2004-09-16 12:34:51 +00:00
#define CONFIG_BOARD_TYPES 1 /* support board types */
2002-09-18 09:04:55 +00:00
#define CONFIG_BAUDRATE 9600
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
#if 1
#define CONFIG_BOOTCOMMAND "bootm fff00000" /* autoboot command */
#else
#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
#endif
#if 0
#define CONFIG_BOOTARGS "root=/dev/nfs " \
"ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 " \
2002-09-18 09:04:55 +00:00
"nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
#else
#define CONFIG_BOOTARGS "root=/dev/hda1 " \
"ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0"
#endif
2004-09-16 12:34:51 +00:00
#define CONFIG_PREBOOT /* enable preboot variable */
2002-09-18 09:04:55 +00:00
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
2004-09-16 12:34:51 +00:00
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
2002-09-18 09:04:55 +00:00
2003-07-11 08:13:25 +00:00
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
2004-09-16 12:34:51 +00:00
CFG_CMD_DHCP | \
2003-07-11 08:13:25 +00:00
CFG_CMD_PCI | \
CFG_CMD_IRQ | \
2004-09-16 12:34:51 +00:00
CFG_CMD_ELF | \
CFG_CMD_MII | \
CFG_CMD_PING | \
CFG_CMD_BSP )
2002-09-18 09:04:55 +00:00
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
2002-09-18 09:04:55 +00:00
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
2002-09-18 09:04:55 +00:00
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
2002-09-18 09:04:55 +00:00
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
2004-09-16 12:34:51 +00:00
#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */
#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
2002-09-18 09:04:55 +00:00
2004-09-16 12:34:51 +00:00
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
2002-09-18 09:04:55 +00:00
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_EXT_SERIAL_CLOCK 14745600 /* use external serial clock */
2002-09-18 09:04:55 +00:00
/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE \
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
57600, 115200, 230400, 460800, 921600 }
2002-09-18 09:04:55 +00:00
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
2002-09-18 09:04:55 +00:00
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
*/
#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
#define PCI_HOST_FORCE 1 /* configure as pci host */
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
2002-09-18 09:04:55 +00:00
#define CONFIG_PCI /* include pci support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
2002-09-18 09:04:55 +00:00
#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
#define CFG_PCI_SUBSYS_DEVICEID 0x0403 /* PCI Device ID: ARISTO405 */
#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
#define CFG_PCI_PTM2LA 0xfff00000 /* point to flash */
#define CFG_PCI_PTM2MS 0xfff00001 /* 1MB, enable */
#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
2002-09-18 09:04:55 +00:00
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
2004-09-16 12:34:51 +00:00
#define CFG_FLASH_BASE 0xFFFC0000
2002-09-18 09:04:55 +00:00
#define CFG_MONITOR_BASE CFG_FLASH_BASE
2004-09-16 12:34:51 +00:00
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
2002-09-18 09:04:55 +00:00
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
2004-09-16 12:34:51 +00:00
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
2002-09-18 09:04:55 +00:00
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
2002-09-18 09:04:55 +00:00
/*
* The following defines are added for buggy IOP480 byte interface.
* All other boards should use the standard values (CPCI405 etc.)
*/
#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
2002-09-18 09:04:55 +00:00
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
2002-09-18 09:04:55 +00:00
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_OFFSET 0x00010000 /* Offset of Environment Sector */
2002-09-18 09:04:55 +00:00
#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
2002-09-18 09:04:55 +00:00
/*-----------------------------------------------------------------------
* Cache Configuration
*/
2004-09-16 12:34:51 +00:00
#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
2002-09-18 09:04:55 +00:00
#define CFG_CACHELINE_SIZE 32 /* ... */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
* Init Memory Controller:
*
* BR0/1 and OR0/1 (FLASH)
*/
2004-09-16 12:34:51 +00:00
#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
2002-09-18 09:04:55 +00:00
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*/
/* Memory Bank 0 (Flash Bank 0) initialization */
#define CFG_EBC_PB0AP 0x92015480
#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
2002-09-18 09:04:55 +00:00
/* Memory Bank 1 (CAN0, 1, 2, 3) initialization */
#define CFG_EBC_PB1AP 0x01000380 /* enable Ready, BEM=0 */
#define CFG_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
2002-09-18 09:04:55 +00:00
/* Memory Bank 2 (Expension Bus) initialization */
#define CFG_EBC_PB2AP 0x01000280 /* disable Ready, BEM=0 */
#define CFG_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
2002-09-18 09:04:55 +00:00
/* Memory Bank 3 (16552) initialization */
#define CFG_EBC_PB3AP 0x01000380 /* enable Ready, BEM=0 */
#define CFG_EBC_PB3CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
2002-09-18 09:04:55 +00:00
/* Memory Bank 4 (FPGA regs) initialization */
#define CFG_EBC_PB4AP 0x01005380 /* enable Ready, BEM=0 */
#define CFG_EBC_PB4CR 0xF031C000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=32bit */
2002-09-18 09:04:55 +00:00
/* Memory Bank 5 (Flash Bank 1/DUMMY) initialization */
#define CFG_EBC_PB5AP 0x92015480
#define CFG_EBC_PB5CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
2002-09-18 09:04:55 +00:00
/*-----------------------------------------------------------------------
2003-07-11 08:13:25 +00:00
* Definitions for initial stack pointer and data area (in data cache)
2002-09-18 09:04:55 +00:00
*/
#define CFG_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */
2002-09-18 09:04:55 +00:00
#define CFG_INIT_RAM_ADDR 0x40000000 /* use data cache */
#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
2003-07-11 08:13:25 +00:00
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
2002-09-18 09:04:55 +00:00
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#endif /* __CONFIG_H */