u-boot/board/spear/common/spr_misc.c

248 lines
5.2 KiB
C
Raw Normal View History

/*
* (C) Copyright 2009
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <i2c.h>
#include <net.h>
#include <linux/mtd/st_smi.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spr_emi.h>
#include <asm/arch/spr_defs.h>
#define CPU 0
#define DDR 1
#define SRAM_REL 0xD2801000
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CMD_NET)
static int i2c_read_mac(uchar *buffer);
#endif
int dram_init(void)
{
/* Store complete RAM size and return */
gd->ram_size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_MAXSIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = gd->ram_size;
}
int board_early_init_f()
{
#if defined(CONFIG_ST_SMI)
smi_init();
#endif
return 0;
}
int misc_init_r(void)
{
#if defined(CONFIG_CMD_NET)
uchar mac_id[6];
if (!eth_getenv_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id))
eth_setenv_enetaddr("ethaddr", mac_id);
#endif
setenv("verify", "n");
#if defined(CONFIG_SPEAR_USBTTY)
setenv("stdin", "usbtty");
setenv("stdout", "usbtty");
setenv("stderr", "usbtty");
#ifndef CONFIG_SYS_NO_DCACHE
dcache_enable();
#endif
#endif
return 0;
}
#ifdef CONFIG_SPEAR_EMI
struct cust_emi_para {
unsigned int tap;
unsigned int tsdp;
unsigned int tdpw;
unsigned int tdpr;
unsigned int tdcs;
};
/* EMI timing setting of m28w640hc of linux kernel */
const struct cust_emi_para emi_timing_m28w640hc = {
.tap = 0x10,
.tsdp = 0x05,
.tdpw = 0x0a,
.tdpr = 0x0a,
.tdcs = 0x05,
};
/* EMI timing setting of bootrom */
const struct cust_emi_para emi_timing_bootrom = {
.tap = 0xf,
.tsdp = 0x0,
.tdpw = 0xff,
.tdpr = 0x111,
.tdcs = 0x02,
};
void spear_emi_init(void)
{
const struct cust_emi_para *p = &emi_timing_m28w640hc;
struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE;
unsigned int cs;
unsigned int val, tmp;
val = readl(CONFIG_SPEAR_RASBASE);
if (val & EMI_ACKMSK)
tmp = 0x3f;
else
tmp = 0x0;
writel(tmp, &emi_regs_p->ack);
for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) {
writel(p->tap, &emi_regs_p->bank_regs[cs].tap);
writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp);
writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw);
writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr);
writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs);
writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3),
&emi_regs_p->bank_regs[cs].control);
}
}
#endif
int spear_board_init(ulong mach_type)
{
gd->bd->bi_arch_number = mach_type;
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR;
#ifdef CONFIG_SPEAR_EMI
spear_emi_init();
#endif
return 0;
}
#if defined(CONFIG_CMD_NET)
static int i2c_read_mac(uchar *buffer)
{
u8 buf[2];
i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
/* Check if mac in i2c memory is valid */
if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
/* Valid mac address is saved in i2c eeprom */
i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN);
return 0;
}
return -1;
}
static int write_mac(uchar *mac)
{
u8 buf[2];
buf[0] = (u8)MAGIC_BYTE0;
buf[1] = (u8)MAGIC_BYTE1;
i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
buf[0] = (u8)~MAGIC_BYTE0;
buf[1] = (u8)~MAGIC_BYTE1;
i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
/* check if valid MAC address is saved in I2C EEPROM or not? */
if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN);
puts("I2C EEPROM written with mac address \n");
return 0;
}
puts("I2C EEPROM writing failed\n");
return -1;
}
#endif
int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
void (*sram_setfreq) (unsigned int, unsigned int);
unsigned int frequency;
#if defined(CONFIG_CMD_NET)
unsigned char mac[6];
#endif
if ((argc > 3) || (argc < 2))
return cmd_usage(cmdtp);
if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) {
frequency = simple_strtoul(argv[2], NULL, 0);
if (frequency > 333) {
printf("Frequency is limited to 333MHz\n");
return 1;
}
sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz);
if (!strcmp(argv[1], "cpufreq")) {
sram_setfreq(CPU, frequency);
printf("CPU frequency changed to %u\n", frequency);
} else {
sram_setfreq(DDR, frequency);
printf("DDR frequency changed to %u\n", frequency);
}
return 0;
#if defined(CONFIG_CMD_NET)
} else if (!strcmp(argv[1], "ethaddr")) {
u32 reg;
char *e, *s = argv[2];
for (reg = 0; reg < 6; ++reg) {
mac[reg] = s ? simple_strtoul(s, &e, 16) : 0;
if (s)
s = (*e) ? e + 1 : e;
}
write_mac(mac);
return 0;
#endif
} else if (!strcmp(argv[1], "print")) {
#if defined(CONFIG_CMD_NET)
if (!i2c_read_mac(mac)) {
printf("Ethaddr (from i2c mem) = %pM\n", mac);
} else {
printf("Ethaddr (from i2c mem) = Not set\n");
}
#endif
return 0;
}
return cmd_usage(cmdtp);
}
U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
"configure chip",
"chip_config cpufreq/ddrfreq frequency\n"
#if defined(CONFIG_CMD_NET)
"chip_config ethaddr XX:XX:XX:XX:XX:XX\n"
#endif
"chip_config print");