u-boot/board/toradex/apalis_imx6/apalis_imx6q.cfg

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2013 Boundary Devices
 * Copyright (C) 2014-2016, Toradex AG
 *
 * Refer doc/README.imximage for more details about how-to configure
 * and create imximage boot image
 *
 * The syntax is taken as close as possible with the kwbimage
 */

/* image version */
IMAGE_VERSION 2

/*
 * Boot Device : one of
 * spi, sd (the board has no nand neither onenand)
 */
BOOT_FROM      sd

#define __ASSEMBLY__
#include <config.h>
#include "asm/arch/mx6-ddr.h"
#include "asm/arch/iomux.h"
#include "asm/arch/crm_regs.h"

#include "ddr-setup.cfg"
#if CONFIG_DDR_MB == 2048
#include "1066mhz_4x256mx16.cfg"
#else
#include "1066mhz_4x128mx16.cfg"
#endif
#include "clocks.cfg"
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
arm: imx: initial support for apalis imx6 This adds board support for the Toradex module family Apalis iMX6. The familiy consists of a module with i.MX6 Dual, i.MX6 Quad with commercial and industrial temperature range. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> 2016-11-30 18:43:08 +00:00			`/*`
			`* Copyright (C) 2013 Boundary Devices`
			`* Copyright (C) 2014-2016, Toradex AG`
			`*`
			`* Refer doc/README.imximage for more details about how-to configure`
			`* and create imximage boot image`
			`*`
			`* The syntax is taken as close as possible with the kwbimage`
			`*/`

			`/* image version */`
			`IMAGE_VERSION 2`

			`/*`
			`* Boot Device : one of`
			`* spi, sd (the board has no nand neither onenand)`
			`*/`
			`BOOT_FROM sd`

			`#define __ASSEMBLY__`
			`#include <config.h>`
			`#include "asm/arch/mx6-ddr.h"`
			`#include "asm/arch/iomux.h"`
			`#include "asm/arch/crm_regs.h"`

			`#include "ddr-setup.cfg"`
			`#if CONFIG_DDR_MB == 2048`
			`#include "1066mhz_4x256mx16.cfg"`
			`#else`
			`#include "1066mhz_4x128mx16.cfg"`
			`#endif`
			`#include "clocks.cfg"`