Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 18:28:55 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/mt8516_pumpkin_defconfig

79 lines
2.1 KiB
Text
Raw Normal View History

board: mediatek: Add pumpkin board support The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-18 17:08:09 +00:00
CONFIG_ARM=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_SYS_TEXT_BASE=0x4C000000
CONFIG_SYS_MALLOC_F_LEN=0x4000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_NR_DRAM_BANKS=1
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x1000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_DM_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="mt8516-pumpkin"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_TARGET_MT8516=y
board: mediatek: Add pumpkin board support The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-18 17:08:09 +00:00
CONFIG_DEBUG_UART_BASE=0x11005000
CONFIG_DEBUG_UART_CLOCK=26000000
# CONFIG_PSCI_RESET is not set
CONFIG_DEBUG_UART=y
Convert CONFIG_SYS_LOAD_ADDR to Kconfig Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-08-23 14:25:31 +00:00
CONFIG_SYS_LOAD_ADDR=0x4c000000
board: mediatek: Add pumpkin board support The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-18 17:08:09 +00:00
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-10 14:11:40 +00:00
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run distro_bootcmd"
board: mediatek: Add pumpkin board support The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-18 17:08:09 +00:00
CONFIG_DEFAULT_FDT_FILE="mt8516-pumpkin"
# CONFIG_DISPLAY_BOARDINFO is not set
configs: pumpkin: enable USB gadget Enable USB gadget on pumpkin. This requires to also enable BOARD_LATE_INIT since the init is done in board_late_init function. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2020-10-16 15:40:08 +00:00
CONFIG_BOARD_LATE_INIT=y
board: mediatek: Add pumpkin board support The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-18 17:08:09 +00:00
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_BOOTI is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_GO is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_MEMORY is not set
CONFIG_CMD_GPT=y
# CONFIG_RANDOM_UUID is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_BLOCK_CACHE is not set
cmd: Rename CMD_MISC to CMD_SLEEP The "cmd/Kconfig" has a TODO description for CMD_MISC that it should really be named as CMD_SLEEP. Change it in the whole source tree. Signed-off-by: Bin Meng <bin.meng@windriver.com>
2020-10-13 10:45:05 +00:00
# CONFIG_CMD_SLEEP is not set
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
board: mediatek: Add pumpkin board support The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-18 17:08:09 +00:00
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_CLK=y
configs: pumpkin: enable fastboot Enable fastboot commands for mt8516 pumpkin board. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2020-10-16 15:40:09 +00:00
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x4d000000
CONFIG_FASTBOOT_BUF_SIZE=0x4000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
fastboot: mmc: extend flash/erase for both emmc hwpart 1 and 2 Update the code and the configs for eMMC boot and userdata partitions acces - FASTBOOT_MMC_BOOT_SUPPORT: boot partition 1 and 2 (erase/write) - FASTBOOT_MMC_BOOT1_NAME: boot partition 1, default name="mmc0boot0" - FASTBOOT_MMC_BOOT2_NAME: boot partition 2, default name="mmc0boot1" This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-01-27 13:46:47 +00:00
CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
fastboot: mmc: Add CONFIG_FASTBOOT_MMC_USER_SUPPORT Split userdata and boot partition support for eMMC update and correct the description (update is supported). The new configuration CONFIG_FASTBOOT_MMC_USER_SUPPORT allows to activate support of userdata partition update, based on target name=CONFIG_FASTBOOT_MMC_USER_NAME This patch also removes the unnecessary dependency with ARCH_MEDIATEK and EFI_PARTITION. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-01-27 13:46:46 +00:00
CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
board: mediatek: Add pumpkin board support The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-18 17:08:09 +00:00
# CONFIG_INPUT is not set
# CONFIG_MMC_QUIRKS is not set
CONFIG_MMC_MTK=y
CONFIG_PINCTRL=y
CONFIG_PINCONF=y
CONFIG_PINCTRL_MT8516=y
CONFIG_RAM=y
CONFIG_BAUDRATE=921600
CONFIG_DM_SERIAL=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_MTK_SERIAL=y
configs: pumpkin: enable USB gadget Enable USB gadget on pumpkin. This requires to also enable BOARD_LATE_INIT since the init is done in board_late_init function. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2020-10-16 15:40:08 +00:00
CONFIG_USB=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB_MUSB_MT85XX=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VENDOR_NUM=0x0e8d
CONFIG_USB_GADGET_PRODUCT_NUM=0x201c
board: mediatek: Add pumpkin board support The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-18 17:08:09 +00:00
CONFIG_WDT=y
CONFIG_WDT_MTK=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-14 22:48:05 +00:00
# CONFIG_SHA256 is not set
Reference in a new issue Copy permalink