u-boot/arch/arm/mach-at91/include/mach/sama5d2.h

252 lines
9.4 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Chip-specific header file for the SAMA5D2 SoC
*
* Copyright (C) 2015 Atmel
* Wenyou Yang <wenyou.yang@atmel.com>
*/
#ifndef __SAMA5D2_H
#define __SAMA5D2_H
/*
* Peripheral identifiers/interrupts.
*/
#define ATMEL_ID_FIQ 0 /* FIQ Interrupt ID */
/* 1 */
#define ATMEL_ID_ARM 2 /* Performance Monitor Unit */
#define ATMEL_ID_PIT 3 /* Periodic Interval Timer Interrupt */
#define ATMEL_ID_WDT 4 /* Watchdog Timer Interrupt */
#define ATMEL_ID_GMAC 5 /* Ethernet MAC */
#define ATMEL_ID_XDMAC0 6 /* DMA Controller 0 */
#define ATMEL_ID_XDMAC1 7 /* DMA Controller 1 */
#define ATMEL_ID_ICM 8 /* Integrity Check Monitor */
#define ATMEL_ID_AES 9 /* Advanced Encryption Standard */
#define ATMEL_ID_AESB 10 /* AES bridge */
#define ATMEL_ID_TDES 11 /* Triple Data Encryption Standard */
#define ATMEL_ID_SHA 12 /* SHA Signature */
#define ATMEL_ID_MPDDRC 13 /* MPDDR Controller */
#define ATMEL_ID_MATRIX1 14 /* H32MX, 32-bit AHB Matrix */
#define ATMEL_ID_MATRIX0 15 /* H64MX, 64-bit AHB Matrix */
#define ATMEL_ID_SECUMOD 16 /* Secure Module */
#define ATMEL_ID_HSMC 17 /* Multi-bit ECC interrupt */
#define ATMEL_ID_PIOA 18 /* Parallel I/O Controller A */
#define ATMEL_ID_FLEXCOM0 19 /* FLEXCOM0 */
#define ATMEL_ID_FLEXCOM1 20 /* FLEXCOM1 */
#define ATMEL_ID_FLEXCOM2 21 /* FLEXCOM2 */
#define ATMEL_ID_FLEXCOM3 22 /* FLEXCOM3 */
#define ATMEL_ID_FLEXCOM4 23 /* FLEXCOM4 */
#define ATMEL_ID_UART0 24 /* UART0 */
#define ATMEL_ID_UART1 25 /* UART1 */
#define ATMEL_ID_UART2 26 /* UART2 */
#define ATMEL_ID_UART3 27 /* UART3 */
#define ATMEL_ID_UART4 28 /* UART4 */
#define ATMEL_ID_TWIHS0 29 /* Two-wire Interface 0 */
#define ATMEL_ID_TWIHS1 30 /* Two-wire Interface 1 */
#define ATMEL_ID_SDMMC0 31 /* Secure Data Memory Card Controller 0 */
#define ATMEL_ID_SDMMC1 32 /* Secure Data Memory Card Controller 1 */
#define ATMEL_ID_SPI0 33 /* Serial Peripheral Interface 0 */
#define ATMEL_ID_SPI1 34 /* Serial Peripheral Interface 1 */
#define ATMEL_ID_TC0 35 /* Timer Counter 0 (ch.0,1,2) */
#define ATMEL_ID_TC1 36 /* Timer Counter 1 (ch.3,4,5) */
/* 37 */
#define ATMEL_ID_PWM 38 /* PWMController0 (ch. 0,1,2,3) */
/* 39 */
#define ATMEL_ID_ADC 40 /* Touch Screen ADC Controller */
#define ATMEL_ID_UHPHS 41 /* USB Host High Speed */
#define ATMEL_ID_UDPHS 42 /* USB Device High Speed */
#define ATMEL_ID_SSC0 43 /* Serial Synchronous Controller 0 */
#define ATMEL_ID_SSC1 44 /* Serial Synchronous Controller 1 */
#define ATMEL_ID_LCDC 45 /* LCD Controller */
#define ATMEL_ID_ISI 46 /* Image Sensor Controller, for A5D2, named after ISC */
#define ATMEL_ID_TRNG 47 /* True Random Number Generator */
#define ATMEL_ID_PDMIC 48 /* PDM Interface Controller */
#define ATMEL_ID_AIC_IRQ 49 /* IRQ Interrupt ID */
#define ATMEL_ID_SFC 50 /* Fuse Controller */
#define ATMEL_ID_SECURAM 51 /* Secure RAM */
#define ATMEL_ID_QSPI0 52 /* QSPI0 */
#define ATMEL_ID_QSPI1 53 /* QSPI1 */
#define ATMEL_ID_I2SC0 54 /* Inter-IC Sound Controller 0 */
#define ATMEL_ID_I2SC1 55 /* Inter-IC Sound Controller 1 */
#define ATMEL_ID_CAN0_INT0 56 /* MCAN 0 Interrupt0 */
#define ATMEL_ID_CAN1_INT0 57 /* MCAN 1 Interrupt0 */
/* 58 */
#define ATMEL_ID_CLASSD 59 /* Audio Class D Amplifier */
#define ATMEL_ID_SFR 60 /* Special Function Register */
#define ATMEL_ID_SAIC 61 /* Secured AIC */
#define ATMEL_ID_AIC 62 /* Advanced Interrupt Controller */
#define ATMEL_ID_L2CC 63 /* L2 Cache Controller */
#define ATMEL_ID_CAN0_INT1 64 /* MCAN 0 Interrupt1 */
#define ATMEL_ID_CAN1_INT1 65 /* MCAN 1 Interrupt1 */
#define ATMEL_ID_GMAC_Q1 66 /* GMAC Queue 1 Interrupt */
#define ATMEL_ID_GMAC_Q2 67 /* GMAC Queue 2 Interrupt */
#define ATMEL_ID_PIOB 68 /* Parallel I/O Controller B */
#define ATMEL_ID_PIOC 69 /* Parallel I/O Controller C */
#define ATMEL_ID_PIOD 70 /* Parallel I/O Controller D */
#define ATMEL_ID_SDMMC0_TIMER 71 /* Secure Data Memory Card Controller 0 (TIMER) */
#define ATMEL_ID_SDMMC1_TIMER 72 /* Secure Data Memory Card Controller 1 (TIMER) */
/* 73 */
#define ATMEL_ID_SYS 74 /* System Controller Interrupt */
#define ATMEL_ID_ACC 75 /* Analog Comparator */
#define ATMEL_ID_RXLP 76 /* UART Low-Power */
#define ATMEL_ID_SFRBU 77 /* Special Function Register BackUp */
#define ATMEL_ID_CHIPID 78 /* Chip ID */
/*
* User Peripherals physical base addresses.
*/
#define ATMEL_BASE_LCDC 0xf0000000
#define ATMEL_BASE_XDMAC1 0xf0004000
#define ATMEL_BASE_MPDDRC 0xf000c000
#define ATMEL_BASE_XDMAC0 0xf0010000
#define ATMEL_BASE_PMC 0xf0014000
#define ATMEL_BASE_MATRIX0 0xf0018000
#define ATMEL_BASE_QSPI0 0xf0020000
#define ATMEL_BASE_QSPI1 0xf0024000
#define ATMEL_BASE_SPI0 0xf8000000
#define ATMEL_BASE_GMAC 0xf8008000
#define ATMEL_BASE_TC0 0xf800c000
#define ATMEL_BASE_TC1 0xf8010000
#define ATMEL_BASE_HSMC 0xf8014000
#define ATMEL_BASE_UART0 0xf801c000
#define ATMEL_BASE_UART1 0xf8020000
#define ATMEL_BASE_UART2 0xf8024000
#define ATMEL_BASE_TWI0 0xf8028000
#define ATMEL_BASE_SFR 0xf8030000
#define ATMEL_BASE_SYSC 0xf8048000
#define ATMEL_BASE_SPI1 0xfc000000
#define ATMEL_BASE_UART3 0xfc008000
#define ATMEL_BASE_UART4 0xfc00c000
#define ATMEL_BASE_TWI1 0xfc028000
#define ATMEL_BASE_UDPHS 0xfc02c000
#define ATMEL_BASE_PIOA 0xfc038000
#define ATMEL_BASE_MATRIX1 0xfc03c000
#define ATMEL_CHIPID_CIDR 0xfc069000
#define ATMEL_CHIPID_EXID 0xfc069004
/*
* Address Memory Space
*/
#define ATMEL_BASE_ROM 0x00000000
#define ATMEL_BASE_CS0 0x10000000
#define ATMEL_BASE_DDRCS 0x20000000
#define ATMEL_BASE_CS1 0x60000000
#define ATMEL_BASE_CS2 0x70000000
#define ATMEL_BASE_CS3 0x80000000
#define ATMEL_BASE_QSPI0_AES_MEM 0x90000000
#define ATMEL_BASE_QSPI1_AES_MEM 0x98000000
#define ATMEL_BASE_SDMMC0 0xa0000000
#define ATMEL_BASE_SDMMC1 0xb0000000
#define ATMEL_BASE_QSPI0_MEM 0xd0000000
#define ATMEL_BASE_QSPI1_MEM 0xd8000000
/*
* PMECC tables in ROM
*/
#define ATMEL_PMECC_INDEX_OFFSET_512 0x40000
#define ATMEL_PMECC_INDEX_OFFSET_1024 0x48000
/*
* Internal Memories
*/
#define ATMEL_BASE_UDPHS_FIFO 0x00300000 /* USB Device HS controller */
#define ATMEL_BASE_OHCI 0x00400000 /* USB Host controller (OHCI) */
#define ATMEL_BASE_EHCI 0x00500000 /* USB Host controller (EHCI) */
/*
* SYSC Spawns
*/
#define ATMEL_BASE_RSTC ATMEL_BASE_SYSC
#define ATMEL_BASE_SHDWC (ATMEL_BASE_SYSC + 0x10)
#define ATMEL_BASE_PIT (ATMEL_BASE_SYSC + 0x30)
#define ATMEL_BASE_WDT (ATMEL_BASE_SYSC + 0x40)
#define ATMEL_BASE_SCKC (ATMEL_BASE_SYSC + 0x50)
#define ATMEL_BASE_RTC (ATMEL_BASE_SYSC + 0xb0)
/*
* Other misc definitions
*/
#define ATMEL_BASE_PMECC (ATMEL_BASE_HSMC + 0x70)
#define ATMEL_BASE_PMERRLOC (ATMEL_BASE_HSMC + 0x500)
#define ATMEL_BASE_SMC (ATMEL_BASE_HSMC + 0x700)
#define ATMEL_BASE_PIOB (ATMEL_BASE_PIOA + 0x40)
#define ATMEL_BASE_PIOC (ATMEL_BASE_PIOB + 0x40)
#define ATMEL_BASE_PIOD (ATMEL_BASE_PIOC + 0x40)
#define ATMEL_PIO_PORTS 4
#define CPU_HAS_PCR
#define CPU_HAS_H32MXDIV
/* AICREDIR Unlock Key */
#define ATMEL_SFR_AICREDIR_KEY 0xB6D81C4D
/* MATRIX0(H64MX) slave id definitions */
#define H64MX_SLAVE_AXIMX_BRIDGE 0 /* Bridge from H64MX to AXIMX */
#define H64MX_SLAVE_PERIPH_BRIDGE 1 /* H64MX Peripheral Bridge */
#define H64MX_SLAVE_DDRC_PORT0 2 /* DDR2 Port0-AESOTF */
#define H64MX_SLAVE_DDRC_PORT1 3 /* DDR2 Port1 */
#define H64MX_SLAVE_DDRC_PORT2 4 /* DDR2 Port2 */
#define H64MX_SLAVE_DDRC_PORT3 5 /* DDR2 Port3 */
#define H64MX_SLAVE_DDRC_PORT4 6 /* DDR2 Port4 */
#define H64MX_SLAVE_DDRC_PORT5 7 /* DDR2 Port5 */
#define H64MX_SLAVE_DDRC_PORT6 8 /* DDR2 Port6 */
#define H64MX_SLAVE_DDRC_PORT7 9 /* DDR2 Port7 */
#define H64MX_SLAVE_SRAM 10 /* Internal SRAM 128K */
#define H64MX_SLAVE_CACHE_L2 11 /* Internal SRAM 128K(L2) */
#define H64MX_SLAVE_QSPI0 12 /* QSPI0 */
#define H64MX_SLAVE_QSPI1 13 /* QSPI1 */
#define H64MX_SLAVE_AESB 14 /* AESB */
/* MATRIX1(H32MX) slave id definitions */
#define H32MX_SLAVE_H64MX_BRIDGE 0 /* Bridge from H32MX to H64MX */
#define H32MX_SLAVE_PERIPH_BRIDGE0 1 /* H32MX Peripheral Bridge 0 */
#define H32MX_SLAVE_PERIPH_BRIDGE1 2 /* H32MX Peripheral Bridge 1 */
#define H32MX_SLAVE_EBI 3 /* External Bus Interface */
#define H32MX_SLAVE_NFC_CMD 3 /* NFC command Register */
#define H32MX_SLAVE_NFC_SRAM 4 /* NFC SRAM */
#define H32MX_SLAVE_USB 5 /* USB Device & Host */
/* SAMA5D2 series chip id definitions */
#define ARCH_ID_SAMA5D2 0x8a5c08c0
#define ARCH_EXID_SAMA5D21CU 0x0000005a
#define ARCH_EXID_SAMA5D22CU 0x00000059
#define ARCH_EXID_SAMA5D22CN 0x00000069
#define ARCH_EXID_SAMA5D23CU 0x00000058
#define ARCH_EXID_SAMA5D24CX 0x00000004
#define ARCH_EXID_SAMA5D24CU 0x00000014
#define ARCH_EXID_SAMA5D26CU 0x00000012
#define ARCH_EXID_SAMA5D27CU 0x00000011
#define ARCH_EXID_SAMA5D27CN 0x00000021
#define ARCH_EXID_SAMA5D28CU 0x00000010
#define ARCH_EXID_SAMA5D28CN 0x00000020
#define ARCH_EXID_SAMA5D29CN 0x00000023
#define ARCH_ID_SAMA5D2_SIP 0x8a5c08c2
#define ARCH_EXID_SAMA5D225C_D1M 0x00000053
#define ARCH_EXID_SAMA5D27C_D5M 0x00000032
#define ARCH_EXID_SAMA5D27C_D1G 0x00000033
#define ARCH_EXID_SAMA5D27C_LD1G 0x00000061
#define ARCH_EXID_SAMA5D27C_LD2G 0x00000062
#define ARCH_EXID_SAMA5D28C_D1G 0x00000013
#define ARCH_EXID_SAMA5D28C_LD1G 0x00000071
#define ARCH_EXID_SAMA5D28C_LD2G 0x00000072
ARM: at91: sama5d2: Wrap cpu detection to fix macb driver When introducing the SAMA5D27 SoCs, the SAMA5D2 series got an additional chip id. The check if the cpu is sama5d2 was changed from a preprocessor definition (inlining a call to 'get_chip_id()') to a C function, probably to not call get_chip_id twice? That however broke a check in the macb ethernet driver. That driver is more generic and also used for other platforms. I suppose this solution was implemented to use it in 'gem_is_gigabit_capable()', without having to stricly depend on the at91 platform: #ifndef cpu_is_sama5d2 #define cpu_is_sama5d2() 0 #endif That only works as long as cpu_is_sama5d2 is a preprocessor definition. (The same is still true for sama5d4 by the way.) So this is a straight forward fix for the workaround. The not working check on the SAMA5D2 CPU lead to an issue on a custom board with a LAN8720A ethernet phy connected to the SoC: => dhcp ethernet@f8008000: PHY present at 1 ethernet@f8008000: Starting autonegotiation... ethernet@f8008000: Autonegotiation complete ethernet@f8008000: link up, 1000Mbps full-duplex (lpa: 0xffff) BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 BOOTP broadcast 11 BOOTP broadcast 12 BOOTP broadcast 13 BOOTP broadcast 14 BOOTP broadcast 15 BOOTP broadcast 16 BOOTP broadcast 17 Retry time exceeded; starting again Notice the wrong reported link speed, although both SoC and phy only support 100 MBit/s! The real issue on reliably detecting the features of that cadence ethernet mac IP block, is probably more complicated, though. Fixes: 245cbc583d ("ARM: at91: Get the Chip ID of SAMA5D2 SiP") Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-03-22 13:25:54 +00:00
/* Checked if defined in ethernet driver macb */
#define cpu_is_sama5d2 _cpu_is_sama5d2
/* PIT Timer(PIT_PIIR) */
#define CONFIG_SYS_TIMER_COUNTER 0xf804803c
#ifndef __ASSEMBLY__
unsigned int get_chip_id(void);
unsigned int get_extension_chip_id(void);
ARM: at91: sama5d2: Wrap cpu detection to fix macb driver When introducing the SAMA5D27 SoCs, the SAMA5D2 series got an additional chip id. The check if the cpu is sama5d2 was changed from a preprocessor definition (inlining a call to 'get_chip_id()') to a C function, probably to not call get_chip_id twice? That however broke a check in the macb ethernet driver. That driver is more generic and also used for other platforms. I suppose this solution was implemented to use it in 'gem_is_gigabit_capable()', without having to stricly depend on the at91 platform: #ifndef cpu_is_sama5d2 #define cpu_is_sama5d2() 0 #endif That only works as long as cpu_is_sama5d2 is a preprocessor definition. (The same is still true for sama5d4 by the way.) So this is a straight forward fix for the workaround. The not working check on the SAMA5D2 CPU lead to an issue on a custom board with a LAN8720A ethernet phy connected to the SoC: => dhcp ethernet@f8008000: PHY present at 1 ethernet@f8008000: Starting autonegotiation... ethernet@f8008000: Autonegotiation complete ethernet@f8008000: link up, 1000Mbps full-duplex (lpa: 0xffff) BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 BOOTP broadcast 11 BOOTP broadcast 12 BOOTP broadcast 13 BOOTP broadcast 14 BOOTP broadcast 15 BOOTP broadcast 16 BOOTP broadcast 17 Retry time exceeded; starting again Notice the wrong reported link speed, although both SoC and phy only support 100 MBit/s! The real issue on reliably detecting the features of that cadence ethernet mac IP block, is probably more complicated, though. Fixes: 245cbc583d ("ARM: at91: Get the Chip ID of SAMA5D2 SiP") Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-03-22 13:25:54 +00:00
int _cpu_is_sama5d2(void);
unsigned int has_lcdc(void);
char *get_cpu_name(void);
#endif
#endif