u-boot/include/configs/puma_rk3399.h

/*
 * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

#ifndef __PUMA_RK3399_H
#define __PUMA_RK3399_H

#include <configs/rk3399_common.h>

/*
 * SPL @ 32kB for ~130kB
 * ENV @ 240KB for 8kB
 * FIT payload (ATF, U-Boot, FDT) @ 256kB
 */
#undef CONFIG_ENV_OFFSET
#define CONFIG_ENV_OFFSET (240 * 1024)

#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 1

#define SDRAM_BANK_SIZE			(2UL << 30)

#define CONFIG_MISC_INIT_R
#define CONFIG_SERIAL_TAG
#define CONFIG_ENV_OVERWRITE

#endif
rockchip: ARM64: split RK3399-Q7 board off the RK3399-EVB board The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit interace) * SD card (on a baseboad) via edge connector * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/MIPI displays * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Note that we use a multi-payload FIT image for booting and have Cortex-M0 payload in a separate subimage: we thus rely on the FIT image loader to put it into the SRAM region that ATF expects it in. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixed build warning on puma-rk3399: Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-04-07 17:13:38 +00:00			`/*`
			`* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH`
			`*`
			`* SPDX-License-Identifier: GPL-2.0+`
			`*/`

			`#ifndef __PUMA_RK3399_H`
			`#define __PUMA_RK3399_H`

			`#include <configs/rk3399_common.h>`

			`/*`
			`* SPL @ 32kB for ~130kB`
			`* ENV @ 240KB for 8kB`
			`* FIT payload (ATF, U-Boot, FDT) @ 256kB`
			`*/`
			`#undef CONFIG_ENV_OFFSET`
			`#define CONFIG_ENV_OFFSET (240 * 1024)`

			`#define CONFIG_ENV_IS_IN_MMC`
			`#define CONFIG_SYS_MMC_ENV_DEV 1`

			`#define SDRAM_BANK_SIZE (2UL << 30)`

rockchip: board: puma_rk3399: add support for serial# and cpuid# via efuses With our efuse driver for the RK3399 ready, we can add the board-specific code that consumes the cpuid from the efuse block and postprocesses it into the system serial (using the same CRC32 based derivation as in Linux). We expose the cpuid via two distinct environment variables: serial# - the serial number, as derived in Linux cpuid# - the raw 16 byte CPU id field from the fuse block Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org> 2017-05-05 17:21:39 +00:00			`#define CONFIG_MISC_INIT_R`
			`#define CONFIG_SERIAL_TAG`
			`#define CONFIG_ENV_OVERWRITE`

rockchip: ARM64: split RK3399-Q7 board off the RK3399-EVB board The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit interace) * SD card (on a baseboad) via edge connector * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/MIPI displays * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Note that we use a multi-payload FIT image for booting and have Cortex-M0 payload in a separate subimage: we thus rely on the FIT image loader to put it into the SRAM region that ATF expects it in. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixed build warning on puma-rk3399: Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-04-07 17:13:38 +00:00			`#endif`