u-boot/configs/ls1043aqds_nand_defconfig

CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
CONFIG_ARM=y
CONFIG_TARGET_LS1043AQDS=y
CONFIG_SYS_NS16550=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
CONFIG_OF_CONTROL=y
CONFIG_DM=y
CONFIG_SPI_FLASH=y
CONFIG_DM_SPI=y
armv8/ls1043aqds: add LS1043AQDS board support LS1043AQDS Specification: ------------------------- Memory subsystem: * 2GByte DDR4 DIMM * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 16 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * Two RGMII ports * XFI 10G port * SGMII * QSGMII with 4x 1G ports PCIe: supports Gen 1 and Gen 2 SATA 3.0: one SATA 3.0 port USB 3.0: two micro AB connector and one type A connector UART: supports two UARTs up to 115200 bps for console Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> [York Sun: Add CONFIG_SYS_NS16550=y in defconfig] Reviewed-by: York Sun <yorksun@freescale.com> 2015-11-11 09:58:37 +00:00			`CONFIG_SPL=y`
			`CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"`
			`CONFIG_ARM=y`
			`CONFIG_TARGET_LS1043AQDS=y`
			`CONFIG_SYS_NS16550=y`
armv8/ls1043aqds: add DSPI support Enable three DSPI flash memories on board. Commands: => sf probe 1:0 SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB => sf probe 1:1 SF: Detected SST25WF040B with page size 256 Bytes, erase size 4 KiB, total 512 KiB => sf probe 1:2 SF: Detected EN25S64 with page size 256 Bytes, erase size 64 KiB, total 8 MiB Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com> 2016-01-25 07:16:05 +00:00			`CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"`
			`CONFIG_OF_CONTROL=y`
			`CONFIG_DM=y`
			`CONFIG_SPI_FLASH=y`
			`CONFIG_DM_SPI=y`