u-boot/arch/arm/dts/vf610-twr.dts

374 lines
7.6 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Copyright 2013 Freescale Semiconductor, Inc.
/dts-v1/;
#include "vf610.dtsi"
/ {
model = "VF610 Tower Board";
compatible = "fsl,vf610-twr", "fsl,vf610";
chosen {
bootargs = "console=ttyLP1,115200";
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x8000000>;
};
audio_ext: mclk_osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
enet_ext: eth_osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_vcc_3v3_mcu: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "vcc_3v3_mcu";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack",
"Speaker", "Speaker Ext",
"Line", "Line In Jack";
simple-audio-card,routing =
"MIC_IN", "Microphone Jack",
"Microphone Jack", "Mic Bias",
"LINE_IN", "Line In Jack",
"Headphone Jack", "HP_OUT",
"Speaker Ext", "LINE_OUT";
simple-audio-card,cpu {
sound-dai = <&sai2>;
frame-master;
bitclock-master;
};
simple-audio-card,codec {
sound-dai = <&codec>;
frame-master;
bitclock-master;
};
};
};
&adc0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_ad5>;
vref-supply = <&reg_vcc_3v3_mcu>;
status = "okay";
};
&clks {
clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
<&clks VF610_CLK_ENET_TS_SEL>;
assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
<&clks VF610_CLK_ENET_EXT>;
};
&dspi0 {
bus-num = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dspi0>;
status = "okay";
sflash: at26df081a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at26df081a";
spi-max-frequency = <16000000>;
spi-cpol;
spi-cpha;
reg = <0>;
};
};
&edma0 {
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
&fec0 {
phy-mode = "rmii";
phy-handle = <&ethphy0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec0>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@1 {
reg = <1>;
};
};
};
&fec1 {
phy-mode = "rmii";
phy-handle = <&ethphy1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&i2c0 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
codec: sgtl5000@a {
#sound-dai-cells = <0>;
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
clocks = <&clks VF610_CLK_SAI2>;
};
};
&iomuxc {
vf610-twr {
pinctrl_adc0_ad5: adc0ad5grp {
fsl,pins = <
VF610_PAD_PTC30__ADC0_SE5 0xa1
>;
};
pinctrl_dspi0: dspi0grp {
fsl,pins = <
VF610_PAD_PTB19__DSPI0_CS0 0x1182
VF610_PAD_PTB20__DSPI0_SIN 0x1181
VF610_PAD_PTB21__DSPI0_SOUT 0x1182
VF610_PAD_PTB22__DSPI0_SCK 0x1182
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTA7__GPIO_134 0x219d
>;
};
pinctrl_fec0: fec0grp {
fsl,pins = <
VF610_PAD_PTA6__RMII_CLKIN 0x30d1
VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3
VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1
VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
>;
};
pinctrl_i2c0: i2c0grp {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x30d3
VF610_PAD_PTB15__I2C0_SDA 0x30d3
>;
};
pinctrl_nfc: nfcgrp {
fsl,pins = <
VF610_PAD_PTD31__NF_IO15 0x28df
VF610_PAD_PTD30__NF_IO14 0x28df
VF610_PAD_PTD29__NF_IO13 0x28df
VF610_PAD_PTD28__NF_IO12 0x28df
VF610_PAD_PTD27__NF_IO11 0x28df
VF610_PAD_PTD26__NF_IO10 0x28df
VF610_PAD_PTD25__NF_IO9 0x28df
VF610_PAD_PTD24__NF_IO8 0x28df
VF610_PAD_PTD23__NF_IO7 0x28df
VF610_PAD_PTD22__NF_IO6 0x28df
VF610_PAD_PTD21__NF_IO5 0x28df
VF610_PAD_PTD20__NF_IO4 0x28df
VF610_PAD_PTD19__NF_IO3 0x28df
VF610_PAD_PTD18__NF_IO2 0x28df
VF610_PAD_PTD17__NF_IO1 0x28df
VF610_PAD_PTD16__NF_IO0 0x28df
VF610_PAD_PTB24__NF_WE_B 0x28c2
VF610_PAD_PTB25__NF_CE0_B 0x28c2
VF610_PAD_PTB27__NF_RE_B 0x28c2
VF610_PAD_PTC26__NF_RB_B 0x283d
VF610_PAD_PTC27__NF_ALE 0x28c2
VF610_PAD_PTC28__NF_CLE 0x28c2
>;
};
pinctrl_pwm0: pwm0grp {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1582
VF610_PAD_PTB1__FTM0_CH1 0x1582
VF610_PAD_PTB2__FTM0_CH2 0x1582
VF610_PAD_PTB3__FTM0_CH3 0x1582
>;
};
pinctrl_sai2: sai2grp {
fsl,pins = <
VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed
VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee
VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed
VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed
VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed
VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed
VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
VF610_PAD_PTB4__UART1_TX 0x21a2
VF610_PAD_PTB5__UART1_RX 0x21a1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
VF610_PAD_PTB6__UART2_TX 0x21a2
VF610_PAD_PTB7__UART2_RX 0x21a1
>;
};
};
};
&nfc {
assigned-clocks = <&clks VF610_CLK_NFC>;
assigned-clock-rates = <33000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nfc>;
status = "okay";
nand@0 {
compatible = "fsl,vf610-nfc-nandcs";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
nand-bus-width = <16>;
nand-ecc-mode = "hw";
nand-ecc-strength = <24>;
nand-ecc-step-size = <2048>;
nand-on-flash-bbt;
};
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0>;
status = "okay";
};
&sai2 {
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai2>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usbdev0 {
disable-over-current;
status = "okay";
};
&usbh1 {
disable-over-current;
status = "okay";
};
&usbmisc0 {
status = "okay";
};
&usbmisc1 {
status = "okay";
};
&usbphy0 {
status = "okay";
};
&usbphy1 {
status = "okay";
};