u-boot/board/renesas/grpeach/lowlevel_init.S

108 lines
2.8 KiB
ArmAsm
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2017 Renesas Electronics
* Copyright (C) 2017 Chris Brandt
*/
#include <config.h>
#include <version.h>
#include <asm/macro.h>
/* Watchdog Registers */
#define RZA1_WDT_BASE 0xFCFE0000
#define WTCSR (RZA1_WDT_BASE + 0x00) /* Watchdog Timer Control Register */
#define WTCNT (RZA1_WDT_BASE + 0x02) /* Watchdog Timer Counter Register */
#define WRCSR (RZA1_WDT_BASE + 0x04) /* Watchdog Reset Control Register */
/* Standby controller registers (chapter 55) */
#define RZA1_STBCR_BASE 0xFCFE0020
#define STBCR1 (RZA1_STBCR_BASE + 0x00)
#define STBCR2 (RZA1_STBCR_BASE + 0x04)
#define STBCR3 (RZA1_STBCR_BASE + 0x400)
#define STBCR4 (RZA1_STBCR_BASE + 0x404)
#define STBCR5 (RZA1_STBCR_BASE + 0x408)
#define STBCR6 (RZA1_STBCR_BASE + 0x40c)
#define STBCR7 (RZA1_STBCR_BASE + 0x410)
#define STBCR8 (RZA1_STBCR_BASE + 0x414)
#define STBCR9 (RZA1_STBCR_BASE + 0x418)
#define STBCR10 (RZA1_STBCR_BASE + 0x41c)
#define STBCR11 (RZA1_STBCR_BASE + 0x420)
#define STBCR12 (RZA1_STBCR_BASE + 0x424)
#define STBCR13 (RZA1_STBCR_BASE + 0x450)
/* Clock Registers */
#define RZA1_FRQCR_BASE 0xFCFE0010
#define FRQCR (RZA1_FRQCR_BASE + 0x00)
#define FRQCR2 (RZA1_FRQCR_BASE + 0x04)
#define SYSCR1 0xFCFE0400 /* System control register 1 */
#define SYSCR2 0xFCFE0404 /* System control register 2 */
#define SYSCR3 0xFCFE0408 /* System control register 3 */
/* Disable WDT */
#define WTCSR_D 0xA518
#define WTCNT_D 0x5A00
/* Enable all peripheral clocks */
#define STBCR3_D 0x00000000
#define STBCR4_D 0x00000000
#define STBCR5_D 0x00000000
#define STBCR6_D 0x00000000
#define STBCR7_D 0x00000024
#define STBCR8_D 0x00000005
#define STBCR9_D 0x00000000
#define STBCR10_D 0x00000000
#define STBCR11_D 0x000000c0
#define STBCR12_D 0x000000f0
/*
* Set all system clocks to full speed.
* On reset, the CPU will be running at 1/2 speed.
* In the Hardware Manual, see Table 6.3 Settable Frequency Ranges
*/
#define FRQCR_D 0x0035
#define FRQCR2_D 0x0001
.global lowlevel_init
.text
.align 2
lowlevel_init:
/* PL310 init */
write32 0x3fffff80, 0x00000001
/* Disable WDT */
write16 WTCSR, WTCSR_D
write16 WTCNT, WTCNT_D
/* Set clocks */
write16 FRQCR, FRQCR_D
write16 FRQCR2, FRQCR2_D
/* Enable all peripherals(Standby Control) */
write8 STBCR3, STBCR3_D
write8 STBCR4, STBCR4_D
write8 STBCR5, STBCR5_D
write8 STBCR6, STBCR6_D
write8 STBCR7, STBCR7_D
write8 STBCR8, STBCR8_D
write8 STBCR9, STBCR9_D
write8 STBCR10, STBCR10_D
write8 STBCR11, STBCR11_D
write8 STBCR12, STBCR12_D
/* For serial booting, enable read ahead caching to speed things up */
#define DRCR_0 0x3FEFA00C
write32 DRCR_0, 0x00010100 /* Read Burst ON, Length=2 */
/* Enable all internal RAM */
write8 SYSCR1, 0xFF
write8 SYSCR2, 0xFF
write8 SYSCR3, 0xFF
nop
/* back to arch calling code */
mov pc, lr
.align 4