Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-05 20:54:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/usb/fotg210.h

363 lines
17 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
usb: ehci: add Faraday USB 2.0 EHCI support This patch adds support to both Faraday FUSBH200 and FOTG210, the differences between Faraday EHCI and standard EHCI are listed bellow: 1. The PORTSC starts at 0x30 instead of 0x44. 2. The CONFIGFLAG(0x40) is not only un-implemented, and also has its address space removed. 3. Faraday EHCI is a TDI design, but it doesn't compatible with the general TDI implementation found at both U-Boot and Linux. 4. The ISOC descriptors differ from standard EHCI in several ways. But since U-boot doesn't support ISOC, we don't have to worry about that. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Marek Vasut <marex@denx.de>
2013-05-15 07:29:23 +00:00
/*
* Faraday USB 2.0 OTG Controller
*
* (C) Copyright 2010 Faraday Technology
* Dante Su <dantesu@faraday-tech.com>
*/
#ifndef _FOTG210_H
#define _FOTG210_H
struct fotg210_regs {
/* USB Host Controller */
struct {
uint32_t data[4];
} hccr; /* 0x00 - 0x0f: hccr */
struct {
uint32_t data[9];
} hcor; /* 0x10 - 0x33: hcor */
uint32_t rsvd1[3];
uint32_t miscr; /* 0x40: Miscellaneous Register */
uint32_t rsvd2[15];
/* USB OTG Controller */
uint32_t otgcsr;/* 0x80: OTG Control Status Register */
uint32_t otgisr;/* 0x84: OTG Interrupt Status Register */
uint32_t otgier;/* 0x88: OTG Interrupt Enable Register */
uint32_t rsvd3[13];
uint32_t isr; /* 0xC0: Global Interrupt Status Register */
uint32_t imr; /* 0xC4: Global Interrupt Mask Register */
uint32_t rsvd4[14];
/* USB Device Controller */
uint32_t dev_ctrl;/* 0x100: Device Control Register */
uint32_t dev_addr;/* 0x104: Device Address Register */
uint32_t dev_test;/* 0x108: Device Test Register */
uint32_t sof_fnr; /* 0x10c: SOF Frame Number Register */
uint32_t sof_mtr; /* 0x110: SOF Mask Timer Register */
uint32_t phy_tmsr;/* 0x114: PHY Test Mode Selector Register */
uint32_t rsvd5[2];
uint32_t cxfifo;/* 0x120: CX FIFO Register */
uint32_t idle; /* 0x124: IDLE Counter Register */
uint32_t rsvd6[2];
uint32_t gimr; /* 0x130: Group Interrupt Mask Register */
uint32_t gimr0; /* 0x134: Group Interrupt Mask Register 0 */
uint32_t gimr1; /* 0x138: Group Interrupt Mask Register 1 */
uint32_t gimr2; /* 0x13c: Group Interrupt Mask Register 2 */
uint32_t gisr; /* 0x140: Group Interrupt Status Register */
uint32_t gisr0; /* 0x144: Group Interrupt Status Register 0 */
uint32_t gisr1; /* 0x148: Group Interrupt Status Register 1 */
uint32_t gisr2; /* 0x14c: Group Interrupt Status Register 2 */
uint32_t rxzlp; /* 0x150: Receive Zero-Length-Packet Register */
uint32_t txzlp; /* 0x154: Transfer Zero-Length-Packet Register */
uint32_t isoeasr;/* 0x158: ISOC Error/Abort Status Register */
uint32_t rsvd7[1];
uint32_t iep[8]; /* 0x160 - 0x17f: IN Endpoint Register */
uint32_t oep[8]; /* 0x180 - 0x19f: OUT Endpoint Register */
uint32_t epmap14;/* 0x1a0: Endpoint Map Register (EP1 ~ 4) */
uint32_t epmap58;/* 0x1a4: Endpoint Map Register (EP5 ~ 8) */
uint32_t fifomap;/* 0x1a8: FIFO Map Register */
uint32_t fifocfg; /* 0x1ac: FIFO Configuration Register */
uint32_t fifocsr[4];/* 0x1b0 - 0x1bf: FIFO Control Status Register */
uint32_t dma_fifo; /* 0x1c0: DMA Target FIFO Register */
uint32_t rsvd8[1];
uint32_t dma_ctrl; /* 0x1c8: DMA Control Register */
uint32_t dma_addr; /* 0x1cc: DMA Address Register */
uint32_t ep0_data; /* 0x1d0: EP0 Setup Packet PIO Register */
};
/* Miscellaneous Register */
#define MISCR_SUSPEND (1 << 6) /* Put transceiver in suspend mode */
#define MISCR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */
#define MISCR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */
#define MISCR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
/* OTG Control Status Register */
#define OTGCSR_SPD_HIGH (2 << 22) /* Speed of the attached device (host) */
#define OTGCSR_SPD_LOW (1 << 22)
#define OTGCSR_SPD_FULL (0 << 22)
#define OTGCSR_SPD_MASK (3 << 22)
#define OTGCSR_SPD_SHIFT 22
#define OTGCSR_SPD(x) (((x) >> 22) & 0x03)
#define OTGCSR_DEV_A (0 << 21) /* Acts as A-device */
#define OTGCSR_DEV_B (1 << 21) /* Acts as B-device */
#define OTGCSR_ROLE_H (0 << 20) /* Acts as Host */
#define OTGCSR_ROLE_D (1 << 20) /* Acts as Device */
#define OTGCSR_A_VBUS_VLD (1 << 19) /* A-device VBUS Valid */
#define OTGCSR_A_SESS_VLD (1 << 18) /* A-device Session Valid */
#define OTGCSR_B_SESS_VLD (1 << 17) /* B-device Session Valid */
#define OTGCSR_B_SESS_END (1 << 16) /* B-device Session End */
#define OTGCSR_HFT_LONG (1 << 11) /* HDISCON noise filter = 270 us*/
#define OTGCSR_HFT (0 << 11) /* HDISCON noise filter = 135 us*/
#define OTGCSR_VFT_LONG (1 << 10) /* VBUS noise filter = 472 us*/
#define OTGCSR_VFT (0 << 10) /* VBUS noise filter = 135 us*/
#define OTGCSR_IDFT_LONG (1 << 9) /* ID noise filter = 4 ms*/
#define OTGCSR_IDFT (0 << 9) /* ID noise filter = 3 ms*/
#define OTGCSR_A_SRPR_VBUS (0 << 8) /* A-device: SRP responds to VBUS */
#define OTGCSR_A_SRPR_DATA (1 << 8) /* A-device: SRP responds to DATA-LINE */
#define OTGCSR_A_SRP_EN (1 << 7) /* A-device SRP detection enabled */
#define OTGCSR_A_HNP (1 << 6) /* Set role=A-device with HNP enabled */
#define OTGCSR_A_BUSDROP (1 << 5) /* A-device drop bus (power-down) */
#define OTGCSR_A_BUSREQ (1 << 4) /* A-device request bus */
#define OTGCSR_B_VBUS_DISC (1 << 2) /* B-device discharges VBUS */
#define OTGCSR_B_HNP (1 << 1) /* B-device enable HNP */
#define OTGCSR_B_BUSREQ (1 << 0) /* B-device request bus */
/* OTG Interrupt Status Register */
#define OTGISR_APRM (1 << 12) /* Mini-A plug removed */
#define OTGISR_BPRM (1 << 11) /* Mini-B plug removed */
#define OTGISR_OVD (1 << 10) /* over-current detected */
#define OTGISR_IDCHG (1 << 9) /* ID(A/B) changed */
#define OTGISR_RLCHG (1 << 8) /* Role(Host/Device) changed */
#define OTGISR_BSESSEND (1 << 6) /* B-device Session End */
#define OTGISR_AVBUSERR (1 << 5) /* A-device VBUS Error */
#define OTGISR_ASRP (1 << 4) /* A-device SRP detected */
#define OTGISR_BSRP (1 << 0) /* B-device SRP complete */
/* OTG Interrupt Enable Register */
#define OTGIER_APRM (1 << 12) /* Mini-A plug removed */
#define OTGIER_BPRM (1 << 11) /* Mini-B plug removed */
#define OTGIER_OVD (1 << 10) /* over-current detected */
#define OTGIER_IDCHG (1 << 9) /* ID(A/B) changed */
#define OTGIER_RLCHG (1 << 8) /* Role(Host/Device) changed */
#define OTGIER_BSESSEND (1 << 6) /* B-device Session End */
#define OTGIER_AVBUSERR (1 << 5) /* A-device VBUS Error */
#define OTGIER_ASRP (1 << 4) /* A-device SRP detected */
#define OTGIER_BSRP (1 << 0) /* B-device SRP complete */
/* Global Interrupt Status Register (W1C) */
#define ISR_HOST (1 << 2) /* USB Host interrupt */
#define ISR_OTG (1 << 1) /* USB OTG interrupt */
#define ISR_DEV (1 << 0) /* USB Device interrupt */
#define ISR_MASK 0x07
/* Global Interrupt Mask Register */
#define IMR_IRQLH (1 << 3) /* Interrupt triggered at level-high */
#define IMR_IRQLL (0 << 3) /* Interrupt triggered at level-low */
#define IMR_HOST (1 << 2) /* USB Host interrupt */
#define IMR_OTG (1 << 1) /* USB OTG interrupt */
#define IMR_DEV (1 << 0) /* USB Device interrupt */
#define IMR_MASK 0x0f
/* Device Control Register */
#define DEVCTRL_FS_FORCED (1 << 9) /* Forced to be Full-Speed Mode */
#define DEVCTRL_HS (1 << 6) /* High Speed Mode */
#define DEVCTRL_FS (0 << 6) /* Full Speed Mode */
#define DEVCTRL_EN (1 << 5) /* Chip Enable */
#define DEVCTRL_RESET (1 << 4) /* Chip Software Reset */
#define DEVCTRL_SUSPEND (1 << 3) /* Enter Suspend Mode */
#define DEVCTRL_GIRQ_EN (1 << 2) /* Global Interrupt Enabled */
#define DEVCTRL_HALFSPD (1 << 1) /* Half speed mode for FPGA test */
#define DEVCTRL_RWAKEUP (1 << 0) /* Enable remote wake-up */
/* Device Address Register */
#define DEVADDR_CONF (1 << 7) /* SET_CONFIGURATION has been executed */
#define DEVADDR_ADDR(x) ((x) & 0x7f)
#define DEVADDR_ADDR_MASK 0x7f
/* Device Test Register */
#define DEVTEST_NOSOF (1 << 6) /* Do not generate SOF */
#define DEVTEST_TST_MODE (1 << 5) /* Enter Test Mode */
#define DEVTEST_TST_NOTS (1 << 4) /* Do not toggle sequence */
#define DEVTEST_TST_NOCRC (1 << 3) /* Do not append CRC */
#define DEVTEST_TST_CLREA (1 << 2) /* Clear External Side Address */
#define DEVTEST_TST_CXLP (1 << 1) /* EP0 loopback test */
#define DEVTEST_TST_CLRFF (1 << 0) /* Clear FIFO */
/* SOF Frame Number Register */
#define SOFFNR_UFN(x) (((x) >> 11) & 0x7) /* SOF Micro-Frame Number */
#define SOFFNR_FNR(x) ((x) & 0x7ff) /* SOF Frame Number */
/* SOF Mask Timer Register */
#define SOFMTR_TMR(x) ((x) & 0xffff)
/* PHY Test Mode Selector Register */
#define PHYTMSR_TST_PKT (1 << 4) /* Packet send test */
#define PHYTMSR_TST_SE0NAK (1 << 3) /* High-Speed quiescent state */
#define PHYTMSR_TST_KSTA (1 << 2) /* High-Speed K state */
#define PHYTMSR_TST_JSTA (1 << 1) /* High-Speed J state */
#define PHYTMSR_UNPLUG (1 << 0) /* Enable soft-detachment */
/* CX FIFO Register */
#define CXFIFO_BYTES(x) (((x) >> 24) & 0x7f) /* CX/EP0 FIFO byte count */
#define CXFIFO_FIFOE(x) (1 << (((x) & 0x03) + 8)) /* EPx FIFO empty */
#define CXFIFO_FIFOE_FIFO0 (1 << 8)
#define CXFIFO_FIFOE_FIFO1 (1 << 9)
#define CXFIFO_FIFOE_FIFO2 (1 << 10)
#define CXFIFO_FIFOE_FIFO3 (1 << 11)
#define CXFIFO_FIFOE_MASK (0x0f << 8)
#define CXFIFO_CXFIFOE (1 << 5) /* CX FIFO empty */
#define CXFIFO_CXFIFOF (1 << 4) /* CX FIFO full */
#define CXFIFO_CXFIFOCLR (1 << 3) /* CX FIFO clear */
#define CXFIFO_CXSTALL (1 << 2) /* CX Stall */
#define CXFIFO_TSTPKTFIN (1 << 1) /* Test packet data transfer finished */
#define CXFIFO_CXFIN (1 << 0) /* CX data transfer finished */
/* IDLE Counter Register */
#define IDLE_MS(x) ((x) & 0x07) /* PHY suspend delay = x ms */
/* Group Interrupt Mask(Disable) Register */
#define GIMR_GRP2 (1 << 2) /* Disable interrupt group 2 */
#define GIMR_GRP1 (1 << 1) /* Disable interrupt group 1 */
#define GIMR_GRP0 (1 << 0) /* Disable interrupt group 0 */
#define GIMR_MASK 0x07
/* Group Interrupt Mask(Disable) Register 0 (CX) */
#define GIMR0_CXABORT (1 << 5) /* CX command abort interrupt */
#define GIMR0_CXERR (1 << 4) /* CX command error interrupt */
#define GIMR0_CXEND (1 << 3) /* CX command end interrupt */
#define GIMR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
#define GIMR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
#define GIMR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
#define GIMR0_MASK 0x3f
/* Group Interrupt Mask(Disable) Register 1 (FIFO) */
#define GIMR1_FIFO_IN(x) (1 << (((x) & 3) + 16)) /* FIFOx IN */
#define GIMR1_FIFO_TX(x) GIMR1_FIFO_IN(x)
#define GIMR1_FIFO_OUT(x) (1 << (((x) & 3) * 2)) /* FIFOx OUT */
#define GIMR1_FIFO_SPK(x) (1 << (((x) & 3) * 2 + 1)) /* FIFOx SHORT PACKET */
#define GIMR1_FIFO_RX(x) (GIMR1_FIFO_OUT(x) | GIMR1_FIFO_SPK(x))
#define GIMR1_MASK 0xf00ff
/* Group Interrupt Mask(Disable) Register 2 (Device) */
#define GIMR2_WAKEUP (1 << 10) /* Device waked up */
#define GIMR2_IDLE (1 << 9) /* Device idle */
#define GIMR2_DMAERR (1 << 8) /* DMA error */
#define GIMR2_DMAFIN (1 << 7) /* DMA finished */
#define GIMR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
#define GIMR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
#define GIMR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
#define GIMR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
#define GIMR2_RESUME (1 << 2) /* Resume state change Interrupt */
#define GIMR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
#define GIMR2_RESET (1 << 0) /* Reset Interrupt */
#define GIMR2_MASK 0x7ff
/* Group Interrupt Status Register */
#define GISR_GRP2 (1 << 2) /* Interrupt group 2 */
#define GISR_GRP1 (1 << 1) /* Interrupt group 1 */
#define GISR_GRP0 (1 << 0) /* Interrupt group 0 */
/* Group Interrupt Status Register 0 (CX) */
#define GISR0_CXABORT (1 << 5) /* CX command abort interrupt */
#define GISR0_CXERR (1 << 4) /* CX command error interrupt */
#define GISR0_CXEND (1 << 3) /* CX command end interrupt */
#define GISR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
#define GISR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
#define GISR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
/* Group Interrupt Status Register 1 (FIFO) */
#define GISR1_IN_FIFO(x) (1 << (((x) & 0x03) + 16)) /* FIFOx IN */
#define GISR1_OUT_FIFO(x) (1 << (((x) & 0x03) * 2)) /* FIFOx OUT */
#define GISR1_SPK_FIFO(x) (1 << (((x) & 0x03) * 2 + 1)) /* FIFOx SPK */
#define GISR1_RX_FIFO(x) (3 << (((x) & 0x03) * 2)) /* FIFOx OUT/SPK */
/* Group Interrupt Status Register 2 (Device) */
#define GISR2_WAKEUP (1 << 10) /* Device waked up */
#define GISR2_IDLE (1 << 9) /* Device idle */
#define GISR2_DMAERR (1 << 8) /* DMA error */
#define GISR2_DMAFIN (1 << 7) /* DMA finished */
#define GISR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
#define GISR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
#define GISR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
#define GISR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
#define GISR2_RESUME (1 << 2) /* Resume state change Interrupt */
#define GISR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
#define GISR2_RESET (1 << 0) /* Reset Interrupt */
/* Receive Zero-Length-Packet Register */
#define RXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP rx interrupt */
/* Transfer Zero-Length-Packet Register */
#define TXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP tx interrupt */
/* ISOC Error/Abort Status Register */
#define ISOEASR_EP(x) (0x10001 << ((x) - 1)) /* EPx ISOC Error/Abort */
/* IN Endpoint Register */
#define IEP_SENDZLP (1 << 15) /* Send Zero-Length-Packet */
#define IEP_TNRHB(x) (((x) & 0x03) << 13) \
/* Transaction Number for High-Bandwidth EP(ISOC) */
#define IEP_RESET (1 << 12) /* Reset Toggle Sequence */
#define IEP_STALL (1 << 11) /* Stall */
#define IEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
/* OUT Endpoint Register */
#define OEP_RESET (1 << 12) /* Reset Toggle Sequence */
#define OEP_STALL (1 << 11) /* Stall */
#define OEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
/* Endpoint Map Register (EP1 ~ EP4) */
#define EPMAP14_SET_IN(ep, fifo) \
((fifo) & 3) << (((ep) - 1) << 3 + 0)
#define EPMAP14_SET_OUT(ep, fifo) \
((fifo) & 3) << (((ep) - 1) << 3 + 4)
#define EPMAP14_SET(ep, in, out) \
do { \
EPMAP14_SET_IN(ep, in); \
EPMAP14_SET_OUT(ep, out); \
} while (0)
#define EPMAP14_DEFAULT 0x33221100 /* EP1->FIFO0, EP2->FIFO1... */
/* Endpoint Map Register (EP5 ~ EP8) */
#define EPMAP58_SET_IN(ep, fifo) \
((fifo) & 3) << (((ep) - 5) << 3 + 0)
#define EPMAP58_SET_OUT(ep, fifo) \
((fifo) & 3) << (((ep) - 5) << 3 + 4)
#define EPMAP58_SET(ep, in, out) \
do { \
EPMAP58_SET_IN(ep, in); \
EPMAP58_SET_OUT(ep, out); \
} while (0)
#define EPMAP58_DEFAULT 0x00000000 /* All EPx->FIFO0 */
/* FIFO Map Register */
#define FIFOMAP_BIDIR (2 << 4)
#define FIFOMAP_IN (1 << 4)
#define FIFOMAP_OUT (0 << 4)
#define FIFOMAP_DIR_MASK 0x30
#define FIFOMAP_EP(x) ((x) & 0x0f)
#define FIFOMAP_EP_MASK 0x0f
#define FIFOMAP_CFG_MASK 0x3f
#define FIFOMAP_DEFAULT 0x04030201 /* FIFO0->EP1, FIFO1->EP2... */
#define FIFOMAP(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
/* FIFO Configuration Register */
#define FIFOCFG_EN (1 << 5)
#define FIFOCFG_BLKSZ_1024 (1 << 4)
#define FIFOCFG_BLKSZ_512 (0 << 4)
#define FIFOCFG_3BLK (2 << 2)
#define FIFOCFG_2BLK (1 << 2)
#define FIFOCFG_1BLK (0 << 2)
#define FIFOCFG_NBLK_MASK 3
#define FIFOCFG_NBLK_SHIFT 2
#define FIFOCFG_INTR (3 << 0)
#define FIFOCFG_BULK (2 << 0)
#define FIFOCFG_ISOC (1 << 0)
#define FIFOCFG_RSVD (0 << 0) /* Reserved */
#define FIFOCFG_TYPE_MASK 3
#define FIFOCFG_TYPE_SHIFT 0
#define FIFOCFG_CFG_MASK 0x3f
#define FIFOCFG(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
/* FIFO Control Status Register */
#define FIFOCSR_RESET (1 << 12) /* FIFO Reset */
#define FIFOCSR_BYTES(x) ((x) & 0x7ff) /* Length(bytes) for OUT-EP/FIFO */
/* DMA Target FIFO Register */
#define DMAFIFO_CX (1 << 4) /* DMA FIFO = CX FIFO */
#define DMAFIFO_FIFO(x) (1 << ((x) & 0x3)) /* DMA FIFO = FIFOx */
/* DMA Control Register */
#define DMACTRL_LEN(x) (((x) & 0x1ffff) << 8) /* DMA length (Bytes) */
#define DMACTRL_LEN_SHIFT 8
#define DMACTRL_CLRFF (1 << 4) /* Clear FIFO upon DMA abort */
#define DMACTRL_ABORT (1 << 3) /* DMA abort */
#define DMACTRL_IO2IO (1 << 2) /* IO to IO */
#define DMACTRL_FIFO2MEM (0 << 1) /* FIFO to Memory */
#define DMACTRL_MEM2FIFO (1 << 1) /* Memory to FIFO */
#define DMACTRL_START (1 << 0) /* DMA start */
#endif
Reference in a new issue Copy permalink