u-boot/include/configs/pogo_e02.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2012
 * David Purdy <david.c.purdy@gmail.com>
 *
 * Based on Kirkwood support:
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
 */

#ifndef _CONFIG_POGO_E02_H
#define _CONFIG_POGO_E02_H

/*
 * Machine type definition and ID
 */
#define CONFIG_MACH_TYPE		MACH_TYPE_POGO_E02

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
#define CONFIG_KW88F6281		/* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/*
 * Commands configuration
 */

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/*
 *  Environment variables configurations
 */

/*
 * Default environment variables
 */
#define CONFIG_BOOTCOMMAND \
	"setenv bootargs $(bootargs_console); " \
	"run bootcmd_usb; " \
	"bootm 0x00800000 0x01100000"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
	"32M(rootfs),-(data)\0"\
	"mtdids=nand0=orion_nand\0"\
	"bootargs_console=console=ttyS0,115200\0" \
	"bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
	"ext2load usb 0:1 0x01100000 /uInitrd\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
#define CONFIG_PHY_BASE_ADR	0
#endif /* CONFIG_CMD_NET */

/*
 * File system
 */

#endif /* _CONFIG_POGO_E02_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
kirkwood: add support for Cloud Engines Pogoplug E02 This patch adds support for Cloud Engines Pogoplug E02 Information regarding the CE Pogoplug E02 board can be found at: http://archlinuxarm.org/platforms/armv5/pogoplug-v2-pinkgray Signed-off-by: Dave Purdy <david.c.purdy@gmail.com> Cc: prafulla@marvell.com Cc: albert.u.boot@aribaud.net 2012-03-27 16:01:09 +00:00			`/*`
			`* Copyright (C) 2012`
			`* David Purdy <david.c.purdy@gmail.com>`
			`*`
			`* Based on Kirkwood support:`
			`* (C) Copyright 2009`
			`* Marvell Semiconductor <www.marvell.com>`
			`* Written-by: Prafulla Wadaskar <prafulla@marvell.com>`
			`*/`

			`#ifndef _CONFIG_POGO_E02_H`
			`#define _CONFIG_POGO_E02_H`

			`/*`
			`* Machine type definition and ID`
			`*/`
			`#define CONFIG_MACH_TYPE MACH_TYPE_POGO_E02`

			`/*`
			`* High Level Configuration Options (easy to change)`
			`*/`
			`#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */`
			`#define CONFIG_KW88F6281 /* SOC Name */`
			`#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */`

			`/*`
			`* Commands configuration`
			`*/`

			`/*`
			`* mv-common.h should be defined after CMD configs since it used them`
			`* to enable certain macros`
			`*/`
			`#include "mv-common.h"`

			`/*`
			`* Environment variables configurations`
			`*/`

			`/*`
			`* Default environment variables`
			`*/`
			`#define CONFIG_BOOTCOMMAND \`
			`"setenv bootargs $(bootargs_console); " \`
			`"run bootcmd_usb; " \`
			`"bootm 0x00800000 0x01100000"`

			`#define CONFIG_EXTRA_ENV_SETTINGS \`
			`"mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \`
			`"32M(rootfs),-(data)\0"\`
			`"mtdids=nand0=orion_nand\0"\`
			`"bootargs_console=console=ttyS0,115200\0" \`
			`"bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \`
			`"ext2load usb 0:1 0x01100000 /uInitrd\0"`

			`/*`
			`* Ethernet Driver configuration`
			`*/`
			`#ifdef CONFIG_CMD_NET`
			`#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */`
			`#define CONFIG_PHY_BASE_ADR 0`
			`#endif /* CONFIG_CMD_NET */`

			`/*`
			`* File system`
			`*/`

			`#endif /* _CONFIG_POGO_E02_H */`