2021-10-17 10:44:32 +00:00
|
|
|
CONFIG_ARM=y
|
|
|
|
|
CONFIG_SKIP_LOWLEVEL_INIT=y
|
|
|
|
|
CONFIG_POSITION_INDEPENDENT=y
|
|
|
|
|
CONFIG_ARCH_SNAPDRAGON=y
|
|
|
|
|
CONFIG_DEFAULT_DEVICE_TREE="starqltechn"
|
board: starqltechn: get board usable - add bootcmd and docs
U-boot is intended to replace linux kernel in android boot image(ABL), and
it's FIT payload to replace initramfs file. The boot process is similar to
boot image with linux:
- android bootloader (ABL) unpacks android boot image
- ABL sets `linux,initrd-start property` in chosen node in unpacked FDT
- ABL sets x0 register to FDT address, and passes control to u-boot
- u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable
- u-boot reads `linux,initrd-start` property,
and stores it in `prevbl_initrd_start_addr`
In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env
variable, and boils down to `bootm $prevbl_initrd_start_addr`.
If more control on boot process is desired, pack a boot script in
FIT image, and put it to default configuration
What done:
- strip unneeded config options
- add FIT image support
- add framebuffer node, u-boot logo and video console
- increase LMB_MAX_REGIONS, to store all linux dtb reserved memory regions
- add linux kernel image header
Uart driver causes hang, when u-boot is used in android boot image instead
of linux. Temporary disable console driver, until investigated and fixed.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2022-02-22 18:49:53 +00:00
|
|
|
CONFIG_BOOTDELAY=0
|
|
|
|
|
CONFIG_FIT=y
|
|
|
|
|
CONFIG_FIT_VERBOSE=y
|
2021-10-17 10:44:32 +00:00
|
|
|
CONFIG_TARGET_STARQLTECHN=y
|
|
|
|
|
CONFIG_IDENT_STRING="\nSamsung S9 SM-G9600"
|
|
|
|
|
CONFIG_SYS_LOAD_ADDR=0x80000000
|
board: starqltechn: get board usable - add bootcmd and docs
U-boot is intended to replace linux kernel in android boot image(ABL), and
it's FIT payload to replace initramfs file. The boot process is similar to
boot image with linux:
- android bootloader (ABL) unpacks android boot image
- ABL sets `linux,initrd-start property` in chosen node in unpacked FDT
- ABL sets x0 register to FDT address, and passes control to u-boot
- u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable
- u-boot reads `linux,initrd-start` property,
and stores it in `prevbl_initrd_start_addr`
In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env
variable, and boils down to `bootm $prevbl_initrd_start_addr`.
If more control on boot process is desired, pack a boot script in
FIT image, and put it to default configuration
What done:
- strip unneeded config options
- add FIT image support
- add framebuffer node, u-boot logo and video console
- increase LMB_MAX_REGIONS, to store all linux dtb reserved memory regions
- add linux kernel image header
Uart driver causes hang, when u-boot is used in android boot image instead
of linux. Temporary disable console driver, until investigated and fixed.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2022-02-22 18:49:53 +00:00
|
|
|
CONFIG_LMB_MAX_REGIONS=64
|
2021-10-17 10:44:32 +00:00
|
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
|
|
|
CONFIG_HUSH_PARSER=y
|
|
|
|
|
CONFIG_CMD_GPIO=y
|
board: starqltechn: get board usable - add bootcmd and docs
U-boot is intended to replace linux kernel in android boot image(ABL), and
it's FIT payload to replace initramfs file. The boot process is similar to
boot image with linux:
- android bootloader (ABL) unpacks android boot image
- ABL sets `linux,initrd-start property` in chosen node in unpacked FDT
- ABL sets x0 register to FDT address, and passes control to u-boot
- u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable
- u-boot reads `linux,initrd-start` property,
and stores it in `prevbl_initrd_start_addr`
In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env
variable, and boils down to `bootm $prevbl_initrd_start_addr`.
If more control on boot process is desired, pack a boot script in
FIT image, and put it to default configuration
What done:
- strip unneeded config options
- add FIT image support
- add framebuffer node, u-boot logo and video console
- increase LMB_MAX_REGIONS, to store all linux dtb reserved memory regions
- add linux kernel image header
Uart driver causes hang, when u-boot is used in android boot image instead
of linux. Temporary disable console driver, until investigated and fixed.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2022-02-22 18:49:53 +00:00
|
|
|
# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
|
2021-10-17 10:44:32 +00:00
|
|
|
# CONFIG_NET is not set
|
|
|
|
|
# CONFIG_DM_STDIO is not set
|
|
|
|
|
CONFIG_CLK=y
|
|
|
|
|
CONFIG_MSM_GPIO=y
|
|
|
|
|
CONFIG_PM8916_GPIO=y
|
|
|
|
|
CONFIG_PINCTRL=y
|
|
|
|
|
CONFIG_DM_PMIC=y
|
|
|
|
|
CONFIG_PMIC_PM8916=y
|
board: starqltechn: get board usable - add bootcmd and docs
U-boot is intended to replace linux kernel in android boot image(ABL), and
it's FIT payload to replace initramfs file. The boot process is similar to
boot image with linux:
- android bootloader (ABL) unpacks android boot image
- ABL sets `linux,initrd-start property` in chosen node in unpacked FDT
- ABL sets x0 register to FDT address, and passes control to u-boot
- u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable
- u-boot reads `linux,initrd-start` property,
and stores it in `prevbl_initrd_start_addr`
In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env
variable, and boils down to `bootm $prevbl_initrd_start_addr`.
If more control on boot process is desired, pack a boot script in
FIT image, and put it to default configuration
What done:
- strip unneeded config options
- add FIT image support
- add framebuffer node, u-boot logo and video console
- increase LMB_MAX_REGIONS, to store all linux dtb reserved memory regions
- add linux kernel image header
Uart driver causes hang, when u-boot is used in android boot image instead
of linux. Temporary disable console driver, until investigated and fixed.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2022-02-22 18:49:53 +00:00
|
|
|
# CONFIG_MSM_GENI_SERIAL is not set
|
2021-10-17 10:44:32 +00:00
|
|
|
CONFIG_SPMI_MSM=y
|
board: starqltechn: get board usable - add bootcmd and docs
U-boot is intended to replace linux kernel in android boot image(ABL), and
it's FIT payload to replace initramfs file. The boot process is similar to
boot image with linux:
- android bootloader (ABL) unpacks android boot image
- ABL sets `linux,initrd-start property` in chosen node in unpacked FDT
- ABL sets x0 register to FDT address, and passes control to u-boot
- u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable
- u-boot reads `linux,initrd-start` property,
and stores it in `prevbl_initrd_start_addr`
In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env
variable, and boils down to `bootm $prevbl_initrd_start_addr`.
If more control on boot process is desired, pack a boot script in
FIT image, and put it to default configuration
What done:
- strip unneeded config options
- add FIT image support
- add framebuffer node, u-boot logo and video console
- increase LMB_MAX_REGIONS, to store all linux dtb reserved memory regions
- add linux kernel image header
Uart driver causes hang, when u-boot is used in android boot image instead
of linux. Temporary disable console driver, until investigated and fixed.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
2022-02-22 18:49:53 +00:00
|
|
|
CONFIG_LINUX_KERNEL_IMAGE_HEADER=y
|
|
|
|
|
CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
|
|
|
|
|
CONFIG_SAVE_PREV_BL_FDT_ADDR=y
|
|
|
|
|
CONFIG_DM_VIDEO=y
|
|
|
|
|
CONFIG_VIDEO_LOGO=y
|
|
|
|
|
CONFIG_CMD_VIDCONSOLE=y
|
|
|
|
|
CONFIG_CONSOLE_NORMAL=y
|
|
|
|
|
CONFIG_SYS_WHITE_ON_BLACK=y
|
|
|
|
|
CONFIG_VIDEO_DT_SIMPLEFB=y
|
|
|
|
|
CONFIG_VIDEO_SIMPLE=y
|
|
|
|
|
CONFIG_CMD_BMP=y
|