u-boot/arch/mips/mach-ath79/Kconfig

menu "QCA/Atheros 7xxx/9xxx platforms"
	depends on ARCH_ATH79

config SYS_SOC
	default "ath79"

config SOC_AR933X
	bool
	select SUPPORTS_BIG_ENDIAN
	select SUPPORTS_CPU_MIPS32_R1
	select SUPPORTS_CPU_MIPS32_R2
	select ROM_EXCEPTION_VECTORS
	select MIPS_TUNE_24KC
	help
	  This supports QCA/Atheros ar933x family SOCs.

config SOC_AR934X
	bool
	select SUPPORTS_BIG_ENDIAN
	select SUPPORTS_CPU_MIPS32_R1
	select SUPPORTS_CPU_MIPS32_R2
	select MIPS_TUNE_74KC
	help
	  This supports QCA/Atheros ar934x family SOCs.

config SOC_QCA953X
	bool
	select SUPPORTS_BIG_ENDIAN
	select SUPPORTS_CPU_MIPS32_R1
	select SUPPORTS_CPU_MIPS32_R2
	select ROM_EXCEPTION_VECTORS
	select MIPS_TUNE_24KC
	help
	  This supports QCA/Atheros qca953x family SOCs.

choice
	prompt "Board select"

config TARGET_AP121
	bool "AP121 Reference Board"
	select SOC_AR933X

config TARGET_AP143
	bool "AP143 Reference Board"
	select SOC_QCA953X

config BOARD_TPLINK_WDR4300
	bool "TP-Link WDR4300 Board"
	select SOC_AR934X

endchoice

source "board/qca/ap121/Kconfig"
source "board/qca/ap143/Kconfig"
source "board/tplink/wdr4300/Kconfig"

endmenu
mips: add base support for QCA/Atheros ath79 SOCs This patch add some common code for QCA/Atheros ath79 SOCs such as DDR tuning, chip reset and CPU detection. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:52 +00:00			`menu "QCA/Atheros 7xxx/9xxx platforms"`
			`depends on ARCH_ATH79`

			`config SYS_SOC`
			`default "ath79"`

mips: ath79: add support for AR933x SOCs This patch enable work for ar933x SOC. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:53 +00:00			`config SOC_AR933X`
			`bool`
			`select SUPPORTS_BIG_ENDIAN`
			`select SUPPORTS_CPU_MIPS32_R1`
			`select SUPPORTS_CPU_MIPS32_R2`
MIPS: make inclusion of ROM exception vectors configurable This adds a compile time option to include code for static exception vectors. Static exception vectors are only needed, when the U-Boot entry point is equal to the CPU reset exception vector address. For instance this is the case when U-Boot is used as ROM in Qemu or booted from parallel NOR flash. When U-Boot is booted from RAM (e.g. loaded there by SPL), the exception vectors need to be setup dynamically, which is done in follow-up commits. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-02-14 17:52:57 +00:00			`select ROM_EXCEPTION_VECTORS`
mips: ath79: add support for AR933x SOCs This patch enable work for ar933x SOC. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:53 +00:00			`select MIPS_TUNE_24KC`
			`help`
			`This supports QCA/Atheros ar933x family SOCs.`

mips: ath79: Add AR934x support Add support for the Atheros AR934x WiSoCs. This patchs adds complete system init, including PLL and DRAM init, both of which happen from full C environment, since the AR934x has proper SRAM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com> 2016-05-06 18:10:40 +00:00			`config SOC_AR934X`
			`bool`
			`select SUPPORTS_BIG_ENDIAN`
			`select SUPPORTS_CPU_MIPS32_R1`
			`select SUPPORTS_CPU_MIPS32_R2`
			`select MIPS_TUNE_74KC`
			`help`
			`This supports QCA/Atheros ar934x family SOCs.`

mips: ath79: add support for QCA953x SOCs This patch enable work for qca953x SOC. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:54 +00:00			`config SOC_QCA953X`
			`bool`
			`select SUPPORTS_BIG_ENDIAN`
			`select SUPPORTS_CPU_MIPS32_R1`
			`select SUPPORTS_CPU_MIPS32_R2`
MIPS: make inclusion of ROM exception vectors configurable This adds a compile time option to include code for static exception vectors. Static exception vectors are only needed, when the U-Boot entry point is equal to the CPU reset exception vector address. For instance this is the case when U-Boot is used as ROM in Qemu or booted from parallel NOR flash. When U-Boot is booted from RAM (e.g. loaded there by SPL), the exception vectors need to be setup dynamically, which is done in follow-up commits. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-02-14 17:52:57 +00:00			`select ROM_EXCEPTION_VECTORS`
mips: ath79: add support for QCA953x SOCs This patch enable work for qca953x SOC. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:54 +00:00			`select MIPS_TUNE_24KC`
			`help`
			`This supports QCA/Atheros qca953x family SOCs.`

mips: ath79: add AP121 reference board This patch add board-level code and base DT for AP121. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-03-16 08:59:59 +00:00			`choice`
			`prompt "Board select"`

			`config TARGET_AP121`
			`bool "AP121 Reference Board"`
			`select SOC_AR933X`

mips: ath79: add AP143 reference board This patch add board-level code and base DT for AP143. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-03-16 09:00:00 +00:00			`config TARGET_AP143`
			`bool "AP143 Reference Board"`
			`select SOC_QCA953X`

mips: ath79: Add support for TPLink WDR4300 Add support for the TPLink WDR4300 router, which is based on the AR9344 MIPS 74Kc CPU and has 128 MiB of RAM. The USB is supported on this system as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com> 2016-05-06 18:10:41 +00:00			`config BOARD_TPLINK_WDR4300`
			`bool "TP-Link WDR4300 Board"`
			`select SOC_AR934X`

mips: ath79: add AP121 reference board This patch add board-level code and base DT for AP121. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-03-16 08:59:59 +00:00			`endchoice`

			`source "board/qca/ap121/Kconfig"`
mips: ath79: add AP143 reference board This patch add board-level code and base DT for AP143. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-03-16 09:00:00 +00:00			`source "board/qca/ap143/Kconfig"`
mips: ath79: Add support for TPLink WDR4300 Add support for the TPLink WDR4300 router, which is based on the AR9344 MIPS 74Kc CPU and has 128 MiB of RAM. The USB is supported on this system as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com> 2016-05-06 18:10:41 +00:00			`source "board/tplink/wdr4300/Kconfig"`
mips: ath79: add AP121 reference board This patch add board-level code and base DT for AP121. Signed-off-by: Wills Wang <wills.wang@live.com> [updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 2016-03-16 08:59:59 +00:00
mips: add base support for QCA/Atheros ath79 SOCs This patch add some common code for QCA/Atheros ath79 SOCs such as DDR tuning, chip reset and CPU detection. Signed-off-by: Wills Wang <wills.wang@live.com> 2016-03-16 08:59:52 +00:00			`endmenu`