u-boot/board/davinci/sonata/board_init.S

88 lines
1.6 KiB
ArmAsm
Raw Normal View History

/*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* Board-specific low level initialization code. Called at the very end
* of arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
* initialization required.
*
* For _OLDER_ Sonata boards sets up GPIO4 to control NAND WP line. Newer
* Sonata boards, AFAIK, don't use this so it's just return by default. Ask
* Visioneering if they reinvented the wheel once again to make sure :)
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
.globl dv_board_init
dv_board_init:
#ifdef SONATA_BOARD_GPIOWP
/* Set PINMUX0 to enable GPIO4 */
ldr r0, _PINMUX0
ldr r1, GPIO4_EN_MASK
ldr r2, [r0]
and r2, r2, r1
str r2, [r0]
/* Enable GPIO LPSC module */
ldr r0, PTSTAT
gpio_ptstat_loop1:
ldr r2, [r0]
tst r2, $0x00000001
bne gpio_ptstat_loop1
ldr r1, MDCTL_GPIO
ldr r2, [r1]
and r2, r2, $0xfffffff8
orr r2, r2, $0x00000003
str r2, [r1]
orr r2, r2, $0x00000200
str r2, [r1]
ldr r1, PTCMD
mov r2, $0x00000001
str r2, [r1]
gpio_ptstat_loop2:
ldr r2, [r0]
tst r2, $0x00000001
bne gpio_ptstat_loop2
ldr r0, MDSTAT_GPIO
gpio_mdstat_loop:
ldr r2, [r0]
and r2, r2, $0x0000001f
teq r2, $0x00000003
bne gpio_mdstat_loop
/* GPIO4 -> output */
ldr r0, GPIO_DIR01
mov r1, $0x10
ldr r2, [r0]
bic r2, r2, r0
str r2, [r0]
/* Set it to 0 (Write Protect) */
ldr r0, GPIO_CLR_DATA01
str r1, [r0]
#endif
mov pc, lr
#ifdef SONATA_BOARD_GPIOWP
.ltorg
GPIO4_EN_MASK:
.word 0xf77fffff
MDCTL_GPIO:
.word 0x01c41a68
MDSTAT_GPIO:
.word 0x01c41868
GPIO_DIR01:
.word 0x01c67010
GPIO_CLR_DATA01:
.word 0x01c6701c
#endif