u-boot/board/eNET/eNET.c

168 lines
4.6 KiB
C
Raw Normal View History

/*
* (C) Copyright 2008
* Graeme Russ, graeme.russ@gmail.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/ic/sc520.h>
#ifdef CONFIG_HW_WATCHDOG
#include <watchdog.h>
#endif
#include "hardware.h"
DECLARE_GLOBAL_DATA_PTR;
#undef SC520_CDP_DEBUG
#ifdef SC520_CDP_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
void init_sc520_enet (void)
{
/* Set CPU Speed to 100MHz */
sc520_mmcr->cpuctl = 0x01;
gd->cpu_clk = 100000000;
/* wait at least one millisecond */
asm("movl $0x2000,%%ecx\n"
"0: pushl %%ecx\n"
"popl %%ecx\n"
"loop 0b\n": : : "ecx");
/* turn on the SDRAM write buffer */
sc520_mmcr->dbctl = 0x11;
/* turn on the cache and disable write through */
asm("movl %%cr0, %%eax\n"
"andl $0x9fffffff, %%eax\n"
"movl %%eax, %%cr0\n" : : : "eax");
}
/*
* Miscellaneous platform dependent initializations
*/
int board_init(void)
{
init_sc520_enet();
sc520_mmcr->gpcsrt = 0x01; /* GP Chip Select Recovery Time */
sc520_mmcr->gpcspw = 0x07; /* GP Chip Select Pulse Width */
sc520_mmcr->gpcsoff = 0x00; /* GP Chip Select Offset */
sc520_mmcr->gprdw = 0x05; /* GP Read pulse width */
sc520_mmcr->gprdoff = 0x01; /* GP Read offset */
sc520_mmcr->gpwrw = 0x05; /* GP Write pulse width */
sc520_mmcr->gpwroff = 0x01; /* GP Write offset */
sc520_mmcr->piodata15_0 = 0x0630; /* PIO15_PIO0 Data */
sc520_mmcr->piodata31_16 = 0x2000; /* PIO31_PIO16 Data */
sc520_mmcr->piodir31_16 = 0x2000; /* GPIO Direction */
sc520_mmcr->piodir15_0 = 0x87b5; /* GPIO Direction */
sc520_mmcr->piopfs31_16 = 0x0dfe; /* GPIO pin function 31-16 reg */
sc520_mmcr->piopfs15_0 = 0x200a; /* GPIO pin function 15-0 reg */
sc520_mmcr->cspfs = 0x00f8; /* Chip Select Pin Function Select */
sc520_mmcr->par[2] = 0x200713f8; /* Uart A (GPCS0, 0x013f8, 8 Bytes) */
sc520_mmcr->par[3] = 0x2c0712f8; /* Uart B (GPCS3, 0x012f8, 8 Bytes) */
sc520_mmcr->par[4] = 0x300711f8; /* Uart C (GPCS4, 0x011f8, 8 Bytes) */
sc520_mmcr->par[5] = 0x340710f8; /* Uart D (GPCS5, 0x010f8, 8 Bytes) */
sc520_mmcr->par[6] = 0xe3ffc000; /* SDRAM (0x00000000, 128MB) */
sc520_mmcr->par[7] = 0xaa3fd000; /* StrataFlash (ROMCS1, 0x10000000, 16MB) */
sc520_mmcr->par[8] = 0xca3fd100; /* StrataFlash (ROMCS2, 0x11000000, 16MB) */
sc520_mmcr->par[9] = 0x4203d900; /* SRAM (GPCS0, 0x19000000, 1MB) */
sc520_mmcr->par[10] = 0x4e03d910; /* SRAM (GPCS3, 0x19100000, 1MB) */
sc520_mmcr->par[11] = 0x50018100; /* DP-RAM (GPCS4, 0x18100000, 4kB) */
sc520_mmcr->par[12] = 0x54020000; /* CFLASH1 (0x200000000, 4kB) */
sc520_mmcr->par[13] = 0x5c020001; /* CFLASH2 (0x200010000, 4kB) */
/* sc520_mmcr->par14 = 0x8bfff800; */ /* BOOTCS at 0x18000000 */
/* sc520_mmcr->par15 = 0x38201000; */ /* LEDs etc (GPCS6, 0x1000, 20 Bytes */
/* Disable Watchdog */
sc520_mmcr->wdtmrctl = 0x3333;
sc520_mmcr->wdtmrctl = 0xcccc;
sc520_mmcr->wdtmrctl = 0x0000;
/* Chip Select Configuration */
sc520_mmcr->bootcsctl = 0x0033;
sc520_mmcr->romcs1ctl = 0x0615;
sc520_mmcr->romcs2ctl = 0x0615;
sc520_mmcr->adddecctl = 0x02;
sc520_mmcr->uart1ctl = 0x07;
sc520_mmcr->sysarbctl = 0x06;
sc520_mmcr->sysarbmenb = 0x0003;
/* Crystal is 33.000MHz */
gd->bus_clk = 33000000;
return 0;
}
int dram_init(void)
{
init_sc520_dram();
return 0;
}
void show_boot_progress(int val)
{
uchar led_mask;
led_mask = 0x00;
if (val < 0)
led_mask |= LED_ERR_BITMASK;
led_mask |= (uchar)(val & 0x001f);
outb(led_mask, LED_LATCH_ADDRESS);
}
int last_stage_init(void)
{
int minor;
int major;
major = minor = 0;
printf("Serck Controls eNET\n");
return 0;
}
ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
{
if (banknum == 0) { /* non-CFI boot flash */
info->portwidth = FLASH_CFI_8BIT;
info->chipwidth = FLASH_CFI_BY8;
info->interface = FLASH_CFI_X8;
return 1;
} else
return 0;
}