u-boot/board/boundary/nitrogen6x/nitrogen6q.cfg

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2013 Boundary Devices
 *
 * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure
 * and create imximage boot image
 *
 * The syntax is taken as close as possible with the kwbimage
 */

/* image version */
IMAGE_VERSION 2

/*
 * Boot Device : one of
 * spi, sd (the board has no nand neither onenand)
 */
BOOT_FROM      spi

#include <config.h>
#ifdef CONFIG_IMX_HAB
CSF CONFIG_CSF_SIZE
#endif
#include "asm/arch/mx6-ddr.h"
#include "asm/arch/iomux.h"
#include "asm/arch/crm_regs.h"

#include "ddr-setup.cfg"
#include "1066mhz_4x128mx16.cfg"
#include "clocks.cfg"
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
Add Boundary Devices Nitrogen6X boards Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> 2013-03-11 08:44:53 +00:00			`/*`
			`* Copyright (C) 2013 Boundary Devices`
			`*`
doc: update reference to README.imximage Update reference in many files detected by scripts/documentation-file-ref-check README.imximage => imx/mkimage/imximage.txt Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 2020-02-28 14:18:12 +00:00			`* Refer doc/imx/mkimage/imximage.txt for more details about how-to configure`
Add Boundary Devices Nitrogen6X boards Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> 2013-03-11 08:44:53 +00:00			`* and create imximage boot image`
			`*`
			`* The syntax is taken as close as possible with the kwbimage`
			`*/`

			`/* image version */`
			`IMAGE_VERSION 2`

			`/*`
			`* Boot Device : one of`
			`* spi, sd (the board has no nand neither onenand)`
			`*/`
i.MX6: nitrogen6x: pedantic: BOOT_FROM==spi, not sd Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de> 2014-02-10 17:22:41 +00:00			`BOOT_FROM spi`
Add Boundary Devices Nitrogen6X boards Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> 2013-03-11 08:44:53 +00:00
			`#include <config.h>`
imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB CONFIG_SECURE_BOOT is too generic and forbids to use it for cross architecture purposes. If Secure Boot is required for imx, this means to enable and use the HAB processor in the soc. Signed-off-by: Stefano Babic <sbabic@denx.de> 2019-09-20 06:47:53 +00:00			`#ifdef CONFIG_IMX_HAB`
nitrogen6x: add secure boot support Declaring a CSF section makes the imximage tool increase the size of data to be loaded by the BootROM and also adds a pointer to that CSF section in the IVT header to the BootROM can check the signature. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> 2016-08-25 17:03:20 +00:00			`CSF CONFIG_CSF_SIZE`
			`#endif`
Add Boundary Devices Nitrogen6X boards Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> 2013-03-11 08:44:53 +00:00			`#include "asm/arch/mx6-ddr.h"`
			`#include "asm/arch/iomux.h"`
			`#include "asm/arch/crm_regs.h"`

			`#include "ddr-setup.cfg"`
			`#include "1066mhz_4x128mx16.cfg"`
			`#include "clocks.cfg"`