u-boot/drivers/pinctrl/pinctrl_stm32.c

522 lines
13 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017-2020 STMicroelectronics - All Rights Reserved
*/
#define LOG_CATEGORY UCLASS_PINCTRL
#include <common.h>
#include <dm.h>
#include <hwspinlock.h>
#include <log.h>
#include <malloc.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <dm/device_compat.h>
#include <dm/lists.h>
#include <dm/pinctrl.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/libfdt.h>
#include <linux/printk.h>
#include "../gpio/stm32_gpio_priv.h"
#define MAX_PINS_ONE_IP 70
#define MODE_BITS_MASK 3
#define OSPEED_MASK 3
#define PUPD_MASK 3
#define OTYPE_MSK 1
#define AFR_MASK 0xF
struct stm32_pinctrl_priv {
struct hwspinlock hws;
int pinctrl_ngpios;
struct list_head gpio_dev;
};
struct stm32_gpio_bank {
struct udevice *gpio_dev;
struct list_head list;
};
#ifndef CONFIG_SPL_BUILD
static char pin_name[PINNAME_SIZE];
static const char * const pinmux_mode[GPIOF_COUNT] = {
[GPIOF_INPUT] = "gpio input",
[GPIOF_OUTPUT] = "gpio output",
[GPIOF_UNUSED] = "analog",
[GPIOF_UNKNOWN] = "unknown",
[GPIOF_FUNC] = "alt function",
};
static const char * const pinmux_bias[] = {
[STM32_GPIO_PUPD_NO] = "",
[STM32_GPIO_PUPD_UP] = "pull-up",
[STM32_GPIO_PUPD_DOWN] = "pull-down",
};
static const char * const pinmux_otype[] = {
[STM32_GPIO_OTYPE_PP] = "push-pull",
[STM32_GPIO_OTYPE_OD] = "open-drain",
};
static const char * const pinmux_speed[] = {
[STM32_GPIO_SPEED_2M] = "Low speed",
[STM32_GPIO_SPEED_25M] = "Medium speed",
[STM32_GPIO_SPEED_50M] = "High speed",
[STM32_GPIO_SPEED_100M] = "Very-high speed",
};
static int stm32_pinctrl_get_af(struct udevice *dev, unsigned int offset)
{
struct stm32_gpio_priv *priv = dev_get_priv(dev);
struct stm32_gpio_regs *regs = priv->regs;
u32 af;
u32 alt_shift = (offset % 8) * 4;
u32 alt_index = offset / 8;
af = (readl(&regs->afr[alt_index]) &
GENMASK(alt_shift + 3, alt_shift)) >> alt_shift;
return af;
}
static int stm32_populate_gpio_dev_list(struct udevice *dev)
{
struct stm32_pinctrl_priv *priv = dev_get_priv(dev);
struct udevice *gpio_dev;
struct udevice *child;
struct stm32_gpio_bank *gpio_bank;
int ret;
/*
* parse pin-controller sub-nodes (ie gpio bank nodes) and fill
* a list with all gpio device reference which belongs to the
* current pin-controller. This list is used to find pin_name and
* pin muxing
*/
list_for_each_entry(child, &dev->child_head, sibling_node) {
ret = uclass_get_device_by_name(UCLASS_GPIO, child->name,
&gpio_dev);
if (ret < 0)
continue;
gpio_bank = malloc(sizeof(*gpio_bank));
if (!gpio_bank) {
dev_err(dev, "Not enough memory\n");
return -ENOMEM;
}
gpio_bank->gpio_dev = gpio_dev;
list_add_tail(&gpio_bank->list, &priv->gpio_dev);
}
return 0;
}
static int stm32_pinctrl_get_pins_count(struct udevice *dev)
{
struct stm32_pinctrl_priv *priv = dev_get_priv(dev);
struct gpio_dev_priv *uc_priv;
struct stm32_gpio_bank *gpio_bank;
/*
* if get_pins_count has already been executed once on this
* pin-controller, no need to run it again
*/
if (priv->pinctrl_ngpios)
return priv->pinctrl_ngpios;
if (list_empty(&priv->gpio_dev))
stm32_populate_gpio_dev_list(dev);
/*
* walk through all banks to retrieve the pin-controller
* pins number
*/
list_for_each_entry(gpio_bank, &priv->gpio_dev, list) {
uc_priv = dev_get_uclass_priv(gpio_bank->gpio_dev);
priv->pinctrl_ngpios += uc_priv->gpio_count;
}
return priv->pinctrl_ngpios;
}
static struct udevice *stm32_pinctrl_get_gpio_dev(struct udevice *dev,
unsigned int selector,
unsigned int *idx)
{
struct stm32_pinctrl_priv *priv = dev_get_priv(dev);
struct stm32_gpio_bank *gpio_bank;
struct gpio_dev_priv *uc_priv;
int pin_count = 0;
if (list_empty(&priv->gpio_dev))
stm32_populate_gpio_dev_list(dev);
/* look up for the bank which owns the requested pin */
list_for_each_entry(gpio_bank, &priv->gpio_dev, list) {
uc_priv = dev_get_uclass_priv(gpio_bank->gpio_dev);
if (selector < (pin_count + uc_priv->gpio_count)) {
/*
* we found the bank, convert pin selector to
* gpio bank index
*/
gpio: stm32_gpio: Rework GPIO hole management On some STM32 SoC's package, GPIO bank may have hole in their GPIO bank Example: If GPIO bank have 16 GPIO pins [0-15]. In particular SoC's package case, some GPIO bank can have less GPIO pins: - [0-10] => 11 pins; - [2-7] => 6 pins. Commit dbf928dd2634 ("gpio: stm32f7: Add gpio bank holes management") proposed a first implementation by not counting GPIO "inside" hole. GPIO are not displaying correctly using gpio or pinmux command when GPIO holes are located at the beginning of GPIO bank. To simplify, consider that all GPIO have 16 GPIO and use the gpio_ranges struct to indicate if a GPIO is mapped or not. GPIO uclass offers several GPIO functions ("input", "output", "unused", "unknown" and "func"), use "unknown" GPIO function to indicate that a GPIO is not mapped. stm32_offset_to_index() is no more needed and removed. This must be reflected using the "gpio" command to indicate to user that a particular GPIO is not mapped (marked as "unknown") as shown below: Example for a 16 pins GPIO bank with the [2-7] mapping (only 6 pins mapped): GPIOI0 : unknown GPIOI1 : unknown GPIOI2 : analog GPIOI3 : analog GPIOI4 : alt function 0 push-pull pull-down GPIOI5 : alt function 0 push-pull pull-down GPIOI6 : alt function 0 push-pull pull-down GPIOI7 : analog GPIOI8 : unknown GPIOI9 : unknown GPIOI10 : unknown GPIOI11 : unknown GPIOI12 : unknown GPIOI13 : unknown GPIOI14 : unknown GPIOI15 : unknown Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-04-22 07:38:31 +00:00
*idx = selector - pin_count;
return gpio_bank->gpio_dev;
}
pin_count += uc_priv->gpio_count;
}
return NULL;
}
static const char *stm32_pinctrl_get_pin_name(struct udevice *dev,
unsigned int selector)
{
struct gpio_dev_priv *uc_priv;
struct udevice *gpio_dev;
unsigned int gpio_idx;
/* look up for the bank which owns the requested pin */
gpio_dev = stm32_pinctrl_get_gpio_dev(dev, selector, &gpio_idx);
if (!gpio_dev) {
snprintf(pin_name, PINNAME_SIZE, "Error");
} else {
uc_priv = dev_get_uclass_priv(gpio_dev);
snprintf(pin_name, PINNAME_SIZE, "%s%d",
uc_priv->bank_name,
gpio_idx);
}
return pin_name;
}
static int stm32_pinctrl_get_pin_muxing(struct udevice *dev,
unsigned int selector,
char *buf,
int size)
{
struct udevice *gpio_dev;
struct stm32_gpio_priv *priv;
const char *label;
int mode;
int af_num;
unsigned int gpio_idx;
u32 pupd, otype;
u8 speed;
/* look up for the bank which owns the requested pin */
gpio_dev = stm32_pinctrl_get_gpio_dev(dev, selector, &gpio_idx);
if (!gpio_dev)
return -ENODEV;
mode = gpio_get_raw_function(gpio_dev, gpio_idx, &label);
dev_dbg(dev, "selector = %d gpio_idx = %d mode = %d\n",
selector, gpio_idx, mode);
priv = dev_get_priv(gpio_dev);
pupd = (readl(&priv->regs->pupdr) >> (gpio_idx * 2)) & PUPD_MASK;
otype = (readl(&priv->regs->otyper) >> gpio_idx) & OTYPE_MSK;
speed = (readl(&priv->regs->ospeedr) >> gpio_idx * 2) & OSPEED_MASK;
switch (mode) {
case GPIOF_UNKNOWN:
case GPIOF_UNUSED:
snprintf(buf, size, "%s", pinmux_mode[mode]);
break;
case GPIOF_FUNC:
af_num = stm32_pinctrl_get_af(gpio_dev, gpio_idx);
snprintf(buf, size, "%s %d %s %s %s", pinmux_mode[mode], af_num,
pinmux_otype[otype], pinmux_bias[pupd],
pinmux_speed[speed]);
break;
case GPIOF_OUTPUT:
snprintf(buf, size, "%s %s %s %s %s",
pinmux_mode[mode], pinmux_otype[otype],
pinmux_bias[pupd], label ? label : "",
pinmux_speed[speed]);
break;
case GPIOF_INPUT:
snprintf(buf, size, "%s %s %s", pinmux_mode[mode],
pinmux_bias[pupd], label ? label : "");
break;
}
return 0;
}
#endif
static int stm32_pinctrl_probe(struct udevice *dev)
{
struct stm32_pinctrl_priv *priv = dev_get_priv(dev);
int ret;
INIT_LIST_HEAD(&priv->gpio_dev);
/* hwspinlock property is optional, just log the error */
ret = hwspinlock_get_by_index(dev, 0, &priv->hws);
if (ret)
dev_dbg(dev, "hwspinlock_get_by_index may have failed (%d)\n",
ret);
return 0;
}
static int stm32_gpio_config(ofnode node,
struct gpio_desc *desc,
const struct stm32_gpio_ctl *ctl)
{
struct stm32_gpio_priv *priv = dev_get_priv(desc->dev);
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(desc->dev);
struct stm32_gpio_regs *regs = priv->regs;
struct stm32_pinctrl_priv *ctrl_priv;
int ret;
u32 index;
if (!ctl || ctl->af > 15 || ctl->mode > 3 || ctl->otype > 1 ||
ctl->pupd > 2 || ctl->speed > 3)
return -EINVAL;
ctrl_priv = dev_get_priv(dev_get_parent(desc->dev));
ret = hwspinlock_lock_timeout(&ctrl_priv->hws, 10);
if (ret == -ETIME) {
dev_err(desc->dev, "HWSpinlock timeout\n");
return ret;
}
index = (desc->offset & 0x07) * 4;
clrsetbits_le32(&regs->afr[desc->offset >> 3], AFR_MASK << index,
ctl->af << index);
index = desc->offset * 2;
clrsetbits_le32(&regs->moder, MODE_BITS_MASK << index,
ctl->mode << index);
clrsetbits_le32(&regs->ospeedr, OSPEED_MASK << index,
ctl->speed << index);
clrsetbits_le32(&regs->pupdr, PUPD_MASK << index, ctl->pupd << index);
index = desc->offset;
clrsetbits_le32(&regs->otyper, OTYPE_MSK << index, ctl->otype << index);
uc_priv->name[desc->offset] = strdup(ofnode_get_name(node));
hwspinlock_unlock(&ctrl_priv->hws);
return 0;
}
static int prep_gpio_dsc(struct stm32_gpio_dsc *gpio_dsc, u32 port_pin)
{
gpio_dsc->port = (port_pin & 0x1F000) >> 12;
gpio_dsc->pin = (port_pin & 0x0F00) >> 8;
log_debug("GPIO:port= %d, pin= %d\n", gpio_dsc->port, gpio_dsc->pin);
return 0;
}
static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn,
ofnode node)
{
gpio_fn &= 0x00FF;
gpio_ctl->af = 0;
switch (gpio_fn) {
case 0:
gpio_ctl->mode = STM32_GPIO_MODE_IN;
break;
case 1 ... 16:
gpio_ctl->mode = STM32_GPIO_MODE_AF;
gpio_ctl->af = gpio_fn - 1;
break;
case 17:
gpio_ctl->mode = STM32_GPIO_MODE_AN;
break;
default:
gpio_ctl->mode = STM32_GPIO_MODE_OUT;
break;
}
gpio_ctl->speed = ofnode_read_u32_default(node, "slew-rate", 0);
if (ofnode_read_bool(node, "drive-open-drain"))
gpio_ctl->otype = STM32_GPIO_OTYPE_OD;
else
gpio_ctl->otype = STM32_GPIO_OTYPE_PP;
if (ofnode_read_bool(node, "bias-pull-up"))
gpio_ctl->pupd = STM32_GPIO_PUPD_UP;
else if (ofnode_read_bool(node, "bias-pull-down"))
gpio_ctl->pupd = STM32_GPIO_PUPD_DOWN;
else
gpio_ctl->pupd = STM32_GPIO_PUPD_NO;
log_debug("gpio fn= %d, slew-rate= %x, op type= %x, pull-upd is = %x\n",
gpio_fn, gpio_ctl->speed, gpio_ctl->otype,
gpio_ctl->pupd);
return 0;
}
static int stm32_pinctrl_config(ofnode node)
{
u32 pin_mux[MAX_PINS_ONE_IP];
int rv, len;
ofnode subnode;
/*
* check for "pinmux" property in each subnode (e.g. pins1 and pins2 for
* usart1) of pin controller phandle "pinctrl-0"
* */
ofnode_for_each_subnode(subnode, node) {
struct stm32_gpio_dsc gpio_dsc;
struct stm32_gpio_ctl gpio_ctl;
int i;
rv = ofnode_read_size(subnode, "pinmux");
if (rv < 0)
return rv;
len = rv / sizeof(pin_mux[0]);
log_debug("No of pinmux entries= %d\n", len);
if (len > MAX_PINS_ONE_IP)
return -EINVAL;
rv = ofnode_read_u32_array(subnode, "pinmux", pin_mux, len);
if (rv < 0)
return rv;
for (i = 0; i < len; i++) {
struct gpio_desc desc;
log_debug("pinmux = %x\n", *(pin_mux + i));
prep_gpio_dsc(&gpio_dsc, *(pin_mux + i));
prep_gpio_ctl(&gpio_ctl, *(pin_mux + i), subnode);
rv = uclass_get_device_by_seq(UCLASS_GPIO,
gpio_dsc.port,
&desc.dev);
if (rv)
return rv;
desc.offset = gpio_dsc.pin;
rv = stm32_gpio_config(node, &desc, &gpio_ctl);
log_debug("rv = %d\n\n", rv);
if (rv)
return rv;
}
}
return 0;
}
static int stm32_pinctrl_bind(struct udevice *dev)
{
ofnode node;
const char *name;
int ret;
dev_for_each_subnode(node, dev) {
dev_dbg(dev, "bind %s\n", ofnode_get_name(node));
if (!ofnode_is_enabled(node))
continue;
ofnode_get_property(node, "gpio-controller", &ret);
if (ret < 0)
continue;
/* Get the name of each gpio node */
name = ofnode_get_name(node);
if (!name)
return -EINVAL;
/* Bind each gpio node */
ret = device_bind_driver_to_node(dev, "gpio_stm32",
name, node, NULL);
if (ret)
return ret;
dev_dbg(dev, "bind %s\n", name);
}
return 0;
}
#if CONFIG_IS_ENABLED(PINCTRL_FULL)
static int stm32_pinctrl_set_state(struct udevice *dev, struct udevice *config)
{
return stm32_pinctrl_config(dev_ofnode(config));
}
#else /* PINCTRL_FULL */
static int stm32_pinctrl_set_state_simple(struct udevice *dev,
struct udevice *periph)
{
const fdt32_t *list;
uint32_t phandle;
ofnode config_node;
int size, i, ret;
list = ofnode_get_property(dev_ofnode(periph), "pinctrl-0", &size);
if (!list)
return -EINVAL;
dev_dbg(dev, "periph->name = %s\n", periph->name);
size /= sizeof(*list);
for (i = 0; i < size; i++) {
phandle = fdt32_to_cpu(*list++);
config_node = ofnode_get_by_phandle(phandle);
if (!ofnode_valid(config_node)) {
dev_err(periph,
"prop pinctrl-0 index %d invalid phandle\n", i);
return -EINVAL;
}
ret = stm32_pinctrl_config(config_node);
if (ret)
return ret;
}
return 0;
}
#endif /* PINCTRL_FULL */
static struct pinctrl_ops stm32_pinctrl_ops = {
#if CONFIG_IS_ENABLED(PINCTRL_FULL)
.set_state = stm32_pinctrl_set_state,
#else /* PINCTRL_FULL */
.set_state_simple = stm32_pinctrl_set_state_simple,
#endif /* PINCTRL_FULL */
#ifndef CONFIG_SPL_BUILD
.get_pin_name = stm32_pinctrl_get_pin_name,
.get_pins_count = stm32_pinctrl_get_pins_count,
.get_pin_muxing = stm32_pinctrl_get_pin_muxing,
#endif
};
static const struct udevice_id stm32_pinctrl_ids[] = {
{ .compatible = "st,stm32f429-pinctrl" },
{ .compatible = "st,stm32f469-pinctrl" },
{ .compatible = "st,stm32f746-pinctrl" },
{ .compatible = "st,stm32f769-pinctrl" },
{ .compatible = "st,stm32h743-pinctrl" },
{ .compatible = "st,stm32mp157-pinctrl" },
{ .compatible = "st,stm32mp157-z-pinctrl" },
{ .compatible = "st,stm32mp135-pinctrl" },
{ .compatible = "st,stm32mp257-pinctrl" },
{ .compatible = "st,stm32mp257-z-pinctrl" },
{ }
};
U_BOOT_DRIVER(pinctrl_stm32) = {
.name = "pinctrl_stm32",
.id = UCLASS_PINCTRL,
.of_match = stm32_pinctrl_ids,
.ops = &stm32_pinctrl_ops,
.bind = stm32_pinctrl_bind,
.probe = stm32_pinctrl_probe,
.priv_auto = sizeof(struct stm32_pinctrl_priv),
};