u-boot/arch/arm/mach-imx/Kconfig

config HAS_CAAM
	bool

config IMX_CONFIG
	string

config ROM_UNIFIED_SECTIONS
	bool

config SYSCOUNTER_TIMER
	bool

config GPT_TIMER
	bool

config IMX_RDC
	bool "i.MX Resource domain controller driver"
	depends on ARCH_MX6 || ARCH_MX7
	help
	  i.MX Resource domain controller is used to assign masters
	  and peripherals to differet domains. This can be used to
	  isolate resources.

config IMX_BOOTAUX
	bool "Support boot auxiliary core"
	depends on ARCH_MX7 || ARCH_MX6 || ARCH_VF610 || ARCH_IMX8M
	help
	  bootaux [addr] to boot auxiliary core.

config IMX_MODULE_FUSE
	bool "i.MX Module Fuse"
	depends on ARCH_MX6
	help
	  i.MX module fuse to runtime disable some driver, including
	  Linux OS device node.

config USE_IMXIMG_PLUGIN
	bool "Use imximage plugin code"
	depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX7ULP
	help
	  i.MX6/7 supports DCD and Plugin. Enable this configuration
	  to use Plugin, otherwise DCD will be used.

config IMX_HAB
	bool "Support i.MX HAB features"
	depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5
	select FSL_CAAM if HAS_CAAM
	imply CMD_DEKBLOB
	help
	  This option enables the support for secure boot (HAB).
	  See doc/imx/habv4/* for more details.

config CSF_SIZE
	hex "Maximum size for Command Sequence File (CSF) binary"
	depends on IMX_HAB
	default 0x2000 if ARCH_IMX8M
	default 0x2060
	help
	  Define the maximum size for Command Sequence File (CSF) binary
	  this information is used to define the image boot data.

config CMD_BMODE
	bool "Support the 'bmode' command"
	default y
	depends on ARCH_MX6 || ARCH_MX5
	help
	  This enables the 'bmode' (bootmode) command for forcing
	  a boot from specific media.

	  This is useful for forcing the ROM's usb downloader to
	  activate upon a watchdog reset which is nice when iterating
	  on U-Boot.  Using the reset button or running bmode normal
	  will set it back to normal.  This command currently
	  supports i.MX53 and i.MX6.

config CMD_DEKBLOB
	bool "Support the 'dek_blob' command"
	help
	  This enables the 'dek_blob' command which is used with the
	  Freescale secure boot mechanism. This command encapsulates and
	  creates a blob of data. See also CMD_BLOB and doc/imx/habv4/* for
	  more information.

config CMD_HDMIDETECT
	bool "Support the 'hdmidet' command"
	help
	  This enables the 'hdmidet' command which detects if an HDMI monitor
	  is connected.

config CMD_NANDBCB
	bool "i.MX6 NAND Boot Control Block(BCB) command"
	depends on MTD_RAW_NAND && CMD_MTDPARTS
	select BCH if MX6UL || MX6ULL
	default y if ((ARCH_MX6 || ARCH_MX7 || ARCH_IMX8M) && NAND_MXS)
	help
	  Unlike normal 'nand write/erase' commands, this command update
	  Boot Control Block(BCB) for i.MX6 platform NAND IP's.

	  This is similar to kobs-ng, which is used in Linux as separate
	  rootfs package.

config NXP_BOARD_REVISION
	bool "Read NXP board revision from fuses"
	depends on ARCH_MX6 || ARCH_MX7
	help
	  NXP boards based on i.MX6/7 contain the board revision information
	  stored in the fuses. Select this option if you want to be able to
	  retrieve the board revision information.

config DDRMC_VF610_CALIBRATION
	bool "Enable DDRMC (DDR3) on-chip calibration"
	depends on ARCH_VF610
	help
	  Vybrid (vf610) SoC provides some on-chip facility to tune the DDR3
	  memory parameters. Select this option if you want to calculate them
	  at boot time.
	  NOTE:
	  NXP does NOT recommend to perform this calibration at each boot. One
	  shall perform it on a new PCB and then use those values to program
	  the ddrmc_cr_setting on relevant board file.

config SPL_IMX_ROMAPI_LOADADDR
	hex "Default load address to load image through ROM API"
	depends on IMX8MN || IMX8MP

config IMX_DCD_ADDR
	hex "DCD Blocks location on the image"
	default 0x00910000 if !ARCH_MX7ULP
	default 0x2f010000 if ARCH_MX7ULP
	help
	  Indicates where the Device Configuration Data, a binary table used by
	  the ROM code to configure the device at early boot stage, is located.
	  This information is shared with the user via mkimage -l just so the
	  image can be signed.