u-boot/arch/arm/mach-omap2/omap3/Kconfig

219 lines
4.1 KiB
Text
Raw Normal View History

if OMAP34XX
# We only enable the clocks for the GPIO banks that a given board requies.
config OMAP3_GPIO_2
bool
config OMAP3_GPIO_3
bool
config OMAP3_GPIO_4
bool
config OMAP3_GPIO_5
bool
config OMAP3_GPIO_6
bool
choice
prompt "OMAP3 board select"
optional
config TARGET_AM3517_EVM
bool "AM3517 EVM"
select DM
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_SERIAL
imply CMD_DM
config TARGET_MT_VENTOUX
bool "TeeJet Mt.Ventoux"
select OMAP3_GPIO_4
select OMAP3_GPIO_5 if USB_EHCI_HCD
config TARGET_OMAP3_BEAGLE
bool "TI OMAP3 BeagleBoard"
dm: select CONFIG_DM* options As mentioned in the previous commit, adding default values in each Kconfig causes problems because it does not co-exist with the "depends on" syntax. (Please note this is not a bug of Kconfig.) We should not do so unless we have a special reason. Actually, for CONFIG_DM*, we have no good reason to do so. Generally, CONFIG_DM is not a user-configurable option. Once we convert a driver into Driver Model, the board only works with Driver Model, i.e. CONFIG_DM must be always enabled for that board. So, using "select DM" is more suitable rather than allowing users to modify it. Another good thing is, Kconfig warns unmet dependencies for "select" syntax, so we easily notice bugs. Actually, CONFIG_DM and other related options have been added without consistency: some into arch/*/Kconfig, some into board/*/Kconfig, and some into configs/*_defconfig. This commit prefers "select" and cleans up the following issues. [1] Never use "CONFIG_DM=n" in defconfig files It is really rare to add "CONFIG_FOO=n" to disable CONFIG options. It is more common to use "# CONFIG_FOO is not set". But here, we do not even have to do it. Less than half of OMAP3 boards have been converted to Driver Model. Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is weird. Instead, add "select DM" only to appropriate boards, which eventually eliminates "CONFIG_DM=n", etc. [2] Delete redundant CONFIGs Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again in configs/sandbox_defconfig. Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and defines it also in omap3_beagle_defconfig and devkit8000_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-31 03:47:53 +00:00
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_5
select OMAP3_GPIO_6
imply CMD_DM
config TARGET_CM_T35
bool "CompuLab CM-T3530 and CM-T3730 boards"
select OMAP3_GPIO_2
select OMAP3_GPIO_5
select OMAP3_GPIO_6 if LED_STATUS
config TARGET_CM_T3517
bool "CompuLab CM-T3517 boards"
select OMAP3_GPIO_2
select OMAP3_GPIO_5
select OMAP3_GPIO_6 if LED_STATUS
config TARGET_DEVKIT8000
bool "TimLL OMAP3 Devkit8000"
dm: select CONFIG_DM* options As mentioned in the previous commit, adding default values in each Kconfig causes problems because it does not co-exist with the "depends on" syntax. (Please note this is not a bug of Kconfig.) We should not do so unless we have a special reason. Actually, for CONFIG_DM*, we have no good reason to do so. Generally, CONFIG_DM is not a user-configurable option. Once we convert a driver into Driver Model, the board only works with Driver Model, i.e. CONFIG_DM must be always enabled for that board. So, using "select DM" is more suitable rather than allowing users to modify it. Another good thing is, Kconfig warns unmet dependencies for "select" syntax, so we easily notice bugs. Actually, CONFIG_DM and other related options have been added without consistency: some into arch/*/Kconfig, some into board/*/Kconfig, and some into configs/*_defconfig. This commit prefers "select" and cleans up the following issues. [1] Never use "CONFIG_DM=n" in defconfig files It is really rare to add "CONFIG_FOO=n" to disable CONFIG options. It is more common to use "# CONFIG_FOO is not set". But here, we do not even have to do it. Less than half of OMAP3 boards have been converted to Driver Model. Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is weird. Instead, add "select DM" only to appropriate boards, which eventually eliminates "CONFIG_DM=n", etc. [2] Delete redundant CONFIGs Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again in configs/sandbox_defconfig. Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and defines it also in omap3_beagle_defconfig and devkit8000_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-31 03:47:53 +00:00
select DM
select DM_GPIO
select DM_SERIAL
imply CMD_DM
config TARGET_OMAP3_EVM
bool "TI OMAP3 EVM"
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_3
imply CMD_DM
config TARGET_OMAP3_IGEP00X0
bool "IGEP"
dm: select CONFIG_DM* options As mentioned in the previous commit, adding default values in each Kconfig causes problems because it does not co-exist with the "depends on" syntax. (Please note this is not a bug of Kconfig.) We should not do so unless we have a special reason. Actually, for CONFIG_DM*, we have no good reason to do so. Generally, CONFIG_DM is not a user-configurable option. Once we convert a driver into Driver Model, the board only works with Driver Model, i.e. CONFIG_DM must be always enabled for that board. So, using "select DM" is more suitable rather than allowing users to modify it. Another good thing is, Kconfig warns unmet dependencies for "select" syntax, so we easily notice bugs. Actually, CONFIG_DM and other related options have been added without consistency: some into arch/*/Kconfig, some into board/*/Kconfig, and some into configs/*_defconfig. This commit prefers "select" and cleans up the following issues. [1] Never use "CONFIG_DM=n" in defconfig files It is really rare to add "CONFIG_FOO=n" to disable CONFIG options. It is more common to use "# CONFIG_FOO is not set". But here, we do not even have to do it. Less than half of OMAP3 boards have been converted to Driver Model. Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is weird. Instead, add "select DM" only to appropriate boards, which eventually eliminates "CONFIG_DM=n", etc. [2] Delete redundant CONFIGs Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again in configs/sandbox_defconfig. Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and defines it also in omap3_beagle_defconfig and devkit8000_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-31 03:47:53 +00:00
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_3
select OMAP3_GPIO_5
select OMAP3_GPIO_6
imply CMD_DM
config TARGET_OMAP3_OVERO
bool "OMAP35xx Gumstix Overo"
dm: select CONFIG_DM* options As mentioned in the previous commit, adding default values in each Kconfig causes problems because it does not co-exist with the "depends on" syntax. (Please note this is not a bug of Kconfig.) We should not do so unless we have a special reason. Actually, for CONFIG_DM*, we have no good reason to do so. Generally, CONFIG_DM is not a user-configurable option. Once we convert a driver into Driver Model, the board only works with Driver Model, i.e. CONFIG_DM must be always enabled for that board. So, using "select DM" is more suitable rather than allowing users to modify it. Another good thing is, Kconfig warns unmet dependencies for "select" syntax, so we easily notice bugs. Actually, CONFIG_DM and other related options have been added without consistency: some into arch/*/Kconfig, some into board/*/Kconfig, and some into configs/*_defconfig. This commit prefers "select" and cleans up the following issues. [1] Never use "CONFIG_DM=n" in defconfig files It is really rare to add "CONFIG_FOO=n" to disable CONFIG options. It is more common to use "# CONFIG_FOO is not set". But here, we do not even have to do it. Less than half of OMAP3 boards have been converted to Driver Model. Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is weird. Instead, add "select DM" only to appropriate boards, which eventually eliminates "CONFIG_DM=n", etc. [2] Delete redundant CONFIGs Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again in configs/sandbox_defconfig. Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and defines it also in omap3_beagle_defconfig and devkit8000_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-31 03:47:53 +00:00
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_5
select OMAP3_GPIO_6
imply CMD_DM
config TARGET_OMAP3_ZOOM1
bool "TI Zoom1"
dm: select CONFIG_DM* options As mentioned in the previous commit, adding default values in each Kconfig causes problems because it does not co-exist with the "depends on" syntax. (Please note this is not a bug of Kconfig.) We should not do so unless we have a special reason. Actually, for CONFIG_DM*, we have no good reason to do so. Generally, CONFIG_DM is not a user-configurable option. Once we convert a driver into Driver Model, the board only works with Driver Model, i.e. CONFIG_DM must be always enabled for that board. So, using "select DM" is more suitable rather than allowing users to modify it. Another good thing is, Kconfig warns unmet dependencies for "select" syntax, so we easily notice bugs. Actually, CONFIG_DM and other related options have been added without consistency: some into arch/*/Kconfig, some into board/*/Kconfig, and some into configs/*_defconfig. This commit prefers "select" and cleans up the following issues. [1] Never use "CONFIG_DM=n" in defconfig files It is really rare to add "CONFIG_FOO=n" to disable CONFIG options. It is more common to use "# CONFIG_FOO is not set". But here, we do not even have to do it. Less than half of OMAP3 boards have been converted to Driver Model. Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is weird. Instead, add "select DM" only to appropriate boards, which eventually eliminates "CONFIG_DM=n", etc. [2] Delete redundant CONFIGs Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again in configs/sandbox_defconfig. Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and defines it also in omap3_beagle_defconfig and devkit8000_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-31 03:47:53 +00:00
select DM
select DM_GPIO
select DM_SERIAL
imply CMD_DM
config TARGET_AM3517_CRANE
bool "am3517_crane"
config TARGET_OMAP3_PANDORA
bool "OMAP3 Pandora"
select OMAP3_GPIO_4
select OMAP3_GPIO_6
config TARGET_ECO5PK
bool "ECO5PK"
select OMAP3_GPIO_5 if USB_EHCI_HCD
config TARGET_TRICORDER
bool "Tricorder"
select OMAP3_GPIO_2
config TARGET_MCX
bool "MCX"
select BOARD_LATE_INIT
select OMAP3_GPIO_2 if USB_EHCI_HCD
select OMAP3_GPIO_5 if USB_EHCI_HCD
config TARGET_OMAP3_LOGIC
bool "OMAP3 Logic"
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_6
imply CMD_DM
config TARGET_NOKIA_RX51
bool "Nokia RX51"
config TARGET_TAO3530
bool "TAO3530"
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_5
select OMAP3_GPIO_6
config TARGET_TWISTER
bool "Twister"
select OMAP3_GPIO_2
select OMAP3_GPIO_5 if USB_EHCI_HCD
config TARGET_OMAP3_CAIRO
bool "QUIPOS CAIRO"
dm: select CONFIG_DM* options As mentioned in the previous commit, adding default values in each Kconfig causes problems because it does not co-exist with the "depends on" syntax. (Please note this is not a bug of Kconfig.) We should not do so unless we have a special reason. Actually, for CONFIG_DM*, we have no good reason to do so. Generally, CONFIG_DM is not a user-configurable option. Once we convert a driver into Driver Model, the board only works with Driver Model, i.e. CONFIG_DM must be always enabled for that board. So, using "select DM" is more suitable rather than allowing users to modify it. Another good thing is, Kconfig warns unmet dependencies for "select" syntax, so we easily notice bugs. Actually, CONFIG_DM and other related options have been added without consistency: some into arch/*/Kconfig, some into board/*/Kconfig, and some into configs/*_defconfig. This commit prefers "select" and cleans up the following issues. [1] Never use "CONFIG_DM=n" in defconfig files It is really rare to add "CONFIG_FOO=n" to disable CONFIG options. It is more common to use "# CONFIG_FOO is not set". But here, we do not even have to do it. Less than half of OMAP3 boards have been converted to Driver Model. Adding the default values to arch/arm/cpu/armv7/omap3/Kconfig is weird. Instead, add "select DM" only to appropriate boards, which eventually eliminates "CONFIG_DM=n", etc. [2] Delete redundant CONFIGs Sandbox sets CONFIG_DM in arch/sandbox/Kconfig and defines it again in configs/sandbox_defconfig. Likewise, OMAP3 sets CONFIG_DM arch/arm/cpu/armv7/omap3/Kconfig and defines it also in omap3_beagle_defconfig and devkit8000_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-31 03:47:53 +00:00
select DM
select DM_GPIO
select DM_SERIAL
imply CMD_DM
config TARGET_SNIPER
bool "LG Optimus Black"
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_5
select OMAP3_GPIO_6
imply CMD_DM
endchoice
choice
prompt "Memory Controller"
default SDRC
config SDRC
bool "SDRC controller"
help
The default memory controller on most OMAP3 boards is SDRC.
config EMIF4
bool "EMIF4 controller"
help
Enable this on boards like AM3517 which use EMIF4 controller
endchoice
config SPL_OMAP3_ID_NAND
bool "Support OMAP3-specific ID and MFR function"
help
Support for an OMAP3-specific set of functions to return the
ID and MFR of the first attached NAND chip, if present.
config SYS_SOC
default "omap3"
source "board/logicpd/am3517evm/Kconfig"
source "board/teejet/mt_ventoux/Kconfig"
source "board/ti/beagle/Kconfig"
source "board/compulab/cm_t35/Kconfig"
source "board/compulab/cm_t3517/Kconfig"
source "board/timll/devkit8000/Kconfig"
source "board/ti/evm/Kconfig"
source "board/isee/igep00x0/Kconfig"
source "board/overo/Kconfig"
source "board/logicpd/zoom1/Kconfig"
source "board/ti/am3517crane/Kconfig"
source "board/pandora/Kconfig"
source "board/8dtech/eco5pk/Kconfig"
source "board/corscience/tricorder/Kconfig"
source "board/htkw/mcx/Kconfig"
source "board/logicpd/omap3som/Kconfig"
source "board/nokia/rx51/Kconfig"
source "board/technexion/tao3530/Kconfig"
source "board/technexion/twister/Kconfig"
source "board/quipos/cairo/Kconfig"
source "board/lg/sniper/Kconfig"
endif