Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 02:08:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/cmd/mvebu/Kconfig

82 lines
2.2 KiB
Text
Raw Normal View History

arm64: mvebu: Add bubt command for flash image burn Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-08 10:22:28 +00:00
menu "MVEBU commands"
depends on ARCH_MVEBU
config CMD_MVEBU_BUBT
bool "bubt"
common: Remove unused CONFIG_FIT_SHAxxx selectors Originally CONFIG_FIT_SHAxxx enabled specific SHA algos for and only for hash_calculate() in common/image-fit.c. However, since commit 14f061dcb1 ("image: Drop IMAGE_ENABLE_SHAxxx"), the correct selector was changed to CONFIG_SHAxxx. The extra "_FIT_" variants are neither used, nor needed. Remove them. One defconfig disables FIT_SHA256, which is now changed to 'SHA256'. CMD_MVEBU_BUBT needs to select select SHA256 to avoid undefined references to "sha256_*()". bubt.c needs sha256, so this selection is correct. It is not clear why this problem did not manifest before. Note that SHA selection in SPL is broken for this exact reason. There is no corresponding SPL_SHAxxx. Fixing this is is beyond the scope of this change. Also note that we make CONFIG_FIT now imply SHA256, to make up for FIT_SHA256 previously being a default y option. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [trini: Add imply SHA256 to FIT] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-03 00:54:17 +00:00
select SHA256 if ARMADA_3700
cmd: mvebu/bubt: Add support for sha512 checksum validation for Armada 3700 Armada 3700 BootROM supports also images with sha512 checksums and mox-imager tool [1] generates such bootable images. Without sha512 support U-Boot bubt command just prints error message: Error: Unsupported hash_algorithm_id = 64 Error: Image header verification failed This patch adds support for sha512 checksum validation for Armada 3700 images. With it bubt prints: Image checksum...OK! [1] - https://gitlab.nic.cz/turris/mox-boot-builder.git Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-26 14:11:58 +00:00
select SHA512 if ARMADA_3700
cmd: mvebu/bubt: Add support for writing image to SATA disk All 32-bit Armada SoCs and also 64-bit Armada 3720 SoC can load and boot firmware from SATA disk. This adds support for updating firmware binary for these SoCs. On 32-bit Armada SoC is firmware stored at sector 1 and on Armada 3720 is stored at MBR partition 0x4d or GPT partition with type GUID 6828311A-BA55-42A4-BCDE-A89BB5EDECAE (Marvell Armada 3700 Boot partition). Signed-off-by: Pali Rohár <pali@kernel.org>
2023-01-22 00:25:12 +00:00
select DOS_PARTITION if ARMADA_3700
select EFI_PARTITION if ARMADA_3700
select PARTITION_TYPE_GUID if ARMADA_3700
cmd: mvebu/bubt: Check for A38x/A37xx OTP secure bits and secure boot For obvious reasons BootROMS rejects unsigned images when secure boot is enabled in OTP secure bits. So check for OPT secure bits and do not allow flashing unsigned images when secure boot is enabled. Access to OTP via U-Boot fuse API is currently implemented only for A38x and A37xx SoCs. Additionally Armada 3700 BootROM rejects signed trusted image when secure boot is not enabled in OTP. So add also check for this case. On the other hand Armada 38x BootROM acceps images with secure boot header when secure boot is not enabled in OTP. OTP secure bits may have burned also boot device source. Check it also and reject flashing images to target storage which does not match OTP. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-08-23 12:52:24 +00:00
select MVEBU_EFUSE if ARMADA_38X || ARMADA_3700
arm64: mvebu: Add bubt command for flash image burn Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-08 10:22:28 +00:00
help
bubt - Burn a u-boot image to flash
For details about bubt command please see the documentation
in doc/mvebu/cmd/bubt.txt
cmd: mvebu: Hide bubt specific options when bubt is disabled CONFIG_MVEBU_NAND_BOOT, CONFIG_MVEBU_SPI_BOOT, CONFIG_MVEBU_MMC_BOOT and CONFIG_MVEBU_UBOOT_DFLT_NAME are unused when CONFIG_CMD_MVEBU_BUBT is not enabled. So hide them. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-03 09:13:24 +00:00
if CMD_MVEBU_BUBT
arm64: mvebu: Add bubt command for flash image burn Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-08 10:22:28 +00:00
choice
prompt "Flash for image"
cmd: mvebu/bubt: Better guess default MVEBU_*_BOOT option For 32-bit Armada boards which use SPL we can determinate boot device from existing MVEBU_SPL_BOOT_DEVICE_* option. For all other boards (e.g. 64-bit Armada) default option still needs to be set manually. Signed-off-by: Pali Rohár <pali@kernel.org>
2023-01-21 22:38:31 +00:00
default MVEBU_SPI_BOOT if MVEBU_SPL_BOOT_DEVICE_SPI
default MVEBU_NAND_BOOT if MVEBU_SPL_BOOT_DEVICE_NAND
default MVEBU_MMC_BOOT if MVEBU_SPL_BOOT_DEVICE_MMC
default MVEBU_SATA_BOOT if MVEBU_SPL_BOOT_DEVICE_SATA
arm64: mvebu: Add bubt command for flash image burn Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-08 10:22:28 +00:00
default MVEBU_SPI_BOOT
config MVEBU_NAND_BOOT
bool "NAND flash boot"
depends on NAND_PXA3XX
help
Enable boot from NAND flash.
Allow usage of NAND flash as a target for "bubt" command
For details about bubt command please see the documentation
in doc/mvebu/cmd/bubt.txt
config MVEBU_SPI_BOOT
bool "SPI flash boot"
depends on SPI_FLASH
help
Enable boot from SPI flash.
Allow usage of SPI flash as a target for "bubt" command
For details about bubt command please see the documentation
in doc/mvebu/cmd/bubt.txt
config MVEBU_MMC_BOOT
bool "eMMC flash boot"
cmd/mvebu: fix the bubt command - fix the dependency for MMC boot (add XENON to MVEBU_MMC) - fix the bubt destination assignment (missing # in "else" case) Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2021-03-17 16:53:43 +00:00
depends on MVEBU_MMC || MMC_SDHCI_XENON
arm64: mvebu: Add bubt command for flash image burn Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-08 10:22:28 +00:00
help
Enable boot from eMMC boot partition
Allow usage of eMMC/SD device as a target for "bubt" command
For details about bubt command please see the documentation
in doc/mvebu/cmd/bubt.txt
cmd: mvebu/bubt: Add support for writing image to SATA disk All 32-bit Armada SoCs and also 64-bit Armada 3720 SoC can load and boot firmware from SATA disk. This adds support for updating firmware binary for these SoCs. On 32-bit Armada SoC is firmware stored at sector 1 and on Armada 3720 is stored at MBR partition 0x4d or GPT partition with type GUID 6828311A-BA55-42A4-BCDE-A89BB5EDECAE (Marvell Armada 3700 Boot partition). Signed-off-by: Pali Rohár <pali@kernel.org>
2023-01-22 00:25:12 +00:00
config MVEBU_SATA_BOOT
bool "SATA flash boot"
depends on SCSI
help
Enable boot from SATA disk.
Allow usage of SATA disk as a target for "bubt" command
For details about bubt command please see the documentation
in doc/mvebu/cmd/bubt.txt
arm64: mvebu: Add bubt command for flash image burn Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-08 10:22:28 +00:00
endchoice
config MVEBU_UBOOT_DFLT_NAME
string "Default image name for bubt command"
cmd: mvebu/bubt: Set correct default image name for 32-bit Armada SoCs 32-bit Armada SoCs uses u-boot binary packed in kwbimage format. Name of the image is in CONFIG_BUILD_TARGET option. So use it as a default option in Kconfig. Signed-off-by: Pali Rohár <pali@kernel.org>
2023-01-08 13:01:03 +00:00
default BUILD_TARGET if ARMADA_32BIT && BUILD_TARGET != ""
arm64: mvebu: Add bubt command for flash image burn Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-08 10:22:28 +00:00
default "flash-image.bin"
help
This option should contain a default file name to be used with
MVEBU "bubt" command if the source file name is omitted
cmd: mvebu: Hide bubt specific options when bubt is disabled CONFIG_MVEBU_NAND_BOOT, CONFIG_MVEBU_SPI_BOOT, CONFIG_MVEBU_MMC_BOOT and CONFIG_MVEBU_UBOOT_DFLT_NAME are unused when CONFIG_CMD_MVEBU_BUBT is not enabled. So hide them. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-05-03 09:13:24 +00:00
endif
cmd: mvebu: Rename rx_training to mvebu_comphy_rx_training Rename the misleading cmd "rx_training" to "mvebu_comphy_rx_training" to avoid confusion and mixup with DDR3/4 training. This makes it clear, that this command is platform specific and handles the COMPHY RX training. Also depend this cmd on ARMADA_8K and not TARGET_MVEBU_ARMADA_8K to make is available for OcteonTX2 CN913x. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pali Rohár <pali@kernel.org> Cc: Marek Behun <marek.behun@nic.cz> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Acked-by: Marek Behún <marek.behun@nic.cz> Acked-by: Pali Rohár <pali@kernel.org>
2021-05-05 07:15:10 +00:00
config CMD_MVEBU_COMPHY_RX_TRAINING
bool "mvebu_comphy_rx_training"
depends on ARMADA_8K
phy: marvell: add RX training command This patch adds support for running RX training using new command called "rx_training" Usage: rx_training - rx_training <cp id> <comphy id> RX training allows to improve link quality (for SFI mode) by running training sequence between us and the link partner, this allows to reach better link quality then using static configuration. Change-Id: I818fe67ccaf19a87af50d4c34a9db7d6802049a5 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
2021-03-23 10:57:57 +00:00
help
cmd: mvebu: Rename rx_training to mvebu_comphy_rx_training Rename the misleading cmd "rx_training" to "mvebu_comphy_rx_training" to avoid confusion and mixup with DDR3/4 training. This makes it clear, that this command is platform specific and handles the COMPHY RX training. Also depend this cmd on ARMADA_8K and not TARGET_MVEBU_ARMADA_8K to make is available for OcteonTX2 CN913x. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pali Rohár <pali@kernel.org> Cc: Marek Behun <marek.behun@nic.cz> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Acked-by: Marek Behún <marek.behun@nic.cz> Acked-by: Pali Rohár <pali@kernel.org>
2021-05-05 07:15:10 +00:00
Perform COMPHY RX training sequence
phy: marvell: add RX training command This patch adds support for running RX training using new command called "rx_training" Usage: rx_training - rx_training <cp id> <comphy id> RX training allows to improve link quality (for SFI mode) by running training sequence between us and the link partner, this allows to reach better link quality then using static configuration. Change-Id: I818fe67ccaf19a87af50d4c34a9db7d6802049a5 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
2021-03-23 10:57:57 +00:00
arm64: mvebu: Add bubt command for flash image burn Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2016-12-08 10:22:28 +00:00
endmenu
Reference in a new issue Copy permalink