mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 06:53:09 +00:00
68 lines
2.2 KiB
Text
68 lines
2.2 KiB
Text
|
RK3368 dynamic memory controller driver
|
||
|
=======================================
|
||
|
|
||
|
The RK3368 DMC (dynamic memory controller) driver supports setup/initialisation
|
||
|
during TPL using configuration data from the DTS (i.e. OF_PLATDATA), based on
|
||
|
the following key configuration data:
|
||
|
(a) a target-frequency (i.e. operating point) for the memory operation
|
||
|
(b) a speed-bin (as defined in JESD-79) for the DDR3 used in hardware
|
||
|
(c) a memory-schedule (i.e. mapping from physical addresses to the address
|
||
|
pins of the memory bus)
|
||
|
|
||
|
Required properties
|
||
|
-------------------
|
||
|
|
||
|
- compatible: "rockchip,rk3368-dmc"
|
||
|
- reg
|
||
|
protocol controller (PCTL) address and PHY controller (DDRPHY) address
|
||
|
- rockchip,ddr-speed-bin
|
||
|
the DDR3 device's speed-bin (as specified according to JESD-79)
|
||
|
DDR3_800D (5-5-5)
|
||
|
DDR3_800E (6-6-6)
|
||
|
DDR3_1066E (6-6-6)
|
||
|
DDR3_1066F (7-7-7)
|
||
|
DDR3_1066G (8-8-8)
|
||
|
DDR3_1333F (7-7-7)
|
||
|
DDR3_1333G (8-8-8)
|
||
|
DDR3_1333H (9-9-9)
|
||
|
DDR3_1333J (10-10-10)
|
||
|
DDR3_1600G (8-8-8)
|
||
|
DDR3_1600H (9-9-9)
|
||
|
DDR3_1600J (10-10-10)
|
||
|
DDR3_1600K (11-11-11)
|
||
|
DDR3_1866J (10-10-10)
|
||
|
DDR3_1866K (11-11-11)
|
||
|
DDR3_1866L (12-12-12)
|
||
|
DDR3_1866M (13-13-13)
|
||
|
DDR3_2133K (11-11-11)
|
||
|
DDR3_2133L (12-12-12)
|
||
|
DDR3_2133M (13-13-13)
|
||
|
DDR3_2133N (14-14-14)
|
||
|
- rockchip,ddr-frequency:
|
||
|
target DDR clock frequency in Hz (not all frequencies may be supported,
|
||
|
as there's some cooperation from the clock-driver required)
|
||
|
- rockchip,memory-schedule:
|
||
|
controls the decoding of physical addresses to DRAM addressing (i.e. how
|
||
|
the physical address maps onto the address pins/chip-select of the device)
|
||
|
DMC_MSCH_CBDR: column -> bank -> device -> row
|
||
|
DMC_MSCH_CBRD: column -> band -> row -> device
|
||
|
DMC_MSCH_CRBD: column -> row -> band -> device
|
||
|
|
||
|
Example (for DDR3-1600K and 800MHz)
|
||
|
-----------------------------------
|
||
|
|
||
|
#include <dt-bindings/memory/rk3368-dmc.h>
|
||
|
|
||
|
dmc: dmc@ff610000 {
|
||
|
u-boot,dm-pre-reloc;
|
||
|
compatible = "rockchip,rk3368-dmc";
|
||
|
reg = <0 0xff610000 0 0x400
|
||
|
0 0xff620000 0 0x400>;
|
||
|
};
|
||
|
|
||
|
&dmc {
|
||
|
rockchip,ddr-speed-bin = <DDR3_1600K>;
|
||
|
rockchip,ddr-frequency = <800000000>;
|
||
|
rockchip,memory-schedule = <DMC_MSCH_CBRD>;
|
||
|
};
|