u-boot/include/configs/dalmore.h

/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <linux/sizes.h>

#include "tegra114-common.h"

/* High-level configuration options */
#define CONFIG_TEGRA_BOARD_STRING	"NVIDIA Dalmore"

/* Board-specific serial config */
#define CONFIG_TEGRA_ENABLE_UARTD
#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE

#define CONFIG_MACH_TYPE		MACH_TYPE_DALMORE

/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_SYS_MMC_ENV_PART		2

/* SPI */
#define CONFIG_SPI_FLASH_SIZE          (4 << 20)

#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"

#endif /* __CONFIG_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0 */`
Tegra114: Add/enable Dalmore build (T114 reference board) This build is stripped down. It boots to the command prompt. GPIO is the only peripheral supported. Others TBD. Signed-off-by: Tom Warren <twarren@nvidia.com> 2013-01-28 13:32:13 +00:00			`/*`
			`* Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

sizes.h - consolidate for all architectures Copied from Linux sources "include/linux/sizes.h" commit 413541dd66d51f791a0b169d9b9014e4f56be13c Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Tom Rini <trini@ti.com> Cc: Stefan Roese <sr@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Acked-by: Tom Rini <trini@ti.com> Acked-by: Stefan Roese <sr@denx.de> [trini: Add bcm Kona platforms to the patch] Signed-off-by: Tom Rini <trini@ti.com> 2014-02-26 13:47:58 +00:00			`#include <linux/sizes.h>`
Tegra114: Add/enable Dalmore build (T114 reference board) This build is stripped down. It boots to the command prompt. GPIO is the only peripheral supported. Others TBD. Signed-off-by: Tom Warren <twarren@nvidia.com> 2013-01-28 13:32:13 +00:00
			`#include "tegra114-common.h"`

			`/* High-level configuration options */`
			`#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Dalmore"`

			`/* Board-specific serial config */`
			`#define CONFIG_TEGRA_ENABLE_UARTD`
			`#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE`

			`#define CONFIG_MACH_TYPE MACH_TYPE_DALMORE`

Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore boards Tested on my Dalmore E1611 board, eMMC and SD-Card work fine, can load a kernel off of an SD card OK, card detect works, and the env is now stored in eMMC (end of the 2nd 'boot' sector, same as Tegra20/30). Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> 2013-03-18 21:52:26 +00:00			`/* Environment in eMMC, at the end of 2nd "boot sector" */`
			`#define CONFIG_SYS_MMC_ENV_DEV 0`
			`#define CONFIG_SYS_MMC_ENV_PART 2`
Tegra114: Add/enable Dalmore build (T114 reference board) This build is stripped down. It boots to the command prompt. GPIO is the only peripheral supported. Others TBD. Signed-off-by: Tom Warren <twarren@nvidia.com> 2013-01-28 13:32:13 +00:00
tegra114: dalmore: config: enable SPI Turn on SPI in dalmore config file Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> 2013-03-16 18:58:14 +00:00			`/* SPI */`
			`#define CONFIG_SPI_FLASH_SIZE (4 << 20)`

ARM: tegra: enable USB device mode port on Dalmore This allows U-Boot to expose UMS and DFU protocols on this port in device mode, or to act as a USB host on the port, using an "OTG" (micro-B to female A host) cable. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 2016-02-15 17:34:04 +00:00			`#include "tegra-common-usb-gadget.h"`
Tegra114: Add/enable Dalmore build (T114 reference board) This build is stripped down. It boots to the command prompt. GPIO is the only peripheral supported. Others TBD. Signed-off-by: Tom Warren <twarren@nvidia.com> 2013-01-28 13:32:13 +00:00			`#include "tegra-common-post.h"`

			`#endif /* __CONFIG_H */`