Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-09-29 10:52:09 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/serial/serial_semihosting.c

204 lines
3.6 KiB
C
Raw Normal View History

serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2022 Sean Anderson <sean.anderson@seco.com>
*/
#include <common.h>
#include <dm.h>
serial: smh: Implement puts for DM This adds an implementation of puts for DM. The implementation is not as clean as for the non-DM puts because we have to handle non-nul-terminated string. We also handle short writes (though these are probably very unusual). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-04 18:18:00 +00:00
#include <malloc.h>
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
#include <serial.h>
#include <semihosting.h>
/**
* struct smh_serial_priv - Semihosting serial private data
* @infd: stdin file descriptor (or error)
serial: smh: Implement puts for DM This adds an implementation of puts for DM. The implementation is not as clean as for the non-DM puts because we have to handle non-nul-terminated string. We also handle short writes (though these are probably very unusual). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-04 18:18:00 +00:00
* @outfd: stdout file descriptor (or error)
serial: smh: Fake tstc ARM semihosting provides no provisions for determining if there is pending input. The only way to determine if there is console input is to do a read (and block until the user types something). For this reason, we always return true for tstc (since you will always get input if you try). However, this behavior can cause problems for code which expects tstc to eventually be empty. In query_console_serial, there is the following construct: /* empty input buffer */ while (tstc()) getchar(); with the current implementation, this effectively turns into an infinite loop. To avoid this, fake tstc by returning false half of the time. This is generally OK because the other common construct looks like do { if (tstc()) process(getchar()); } while (!timeout()); so it's fine if we only read a new character every other loop. This will break things like CYGACC_COMM_IF_GETC_TIMEOUT, but that could be reworked to test on the timeout instead of calling tstc again (and ymodem over semihosted serial is not that useful in the first place). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-05-17 17:55:07 +00:00
* @counter: Counter used to fake pending every other call
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
*/
struct smh_serial_priv {
int infd;
int outfd;
serial: smh: Fake tstc ARM semihosting provides no provisions for determining if there is pending input. The only way to determine if there is console input is to do a read (and block until the user types something). For this reason, we always return true for tstc (since you will always get input if you try). However, this behavior can cause problems for code which expects tstc to eventually be empty. In query_console_serial, there is the following construct: /* empty input buffer */ while (tstc()) getchar(); with the current implementation, this effectively turns into an infinite loop. To avoid this, fake tstc by returning false half of the time. This is generally OK because the other common construct looks like do { if (tstc()) process(getchar()); } while (!timeout()); so it's fine if we only read a new character every other loop. This will break things like CYGACC_COMM_IF_GETC_TIMEOUT, but that could be reworked to test on the timeout instead of calling tstc again (and ymodem over semihosted serial is not that useful in the first place). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-05-17 17:55:07 +00:00
unsigned counter;
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
};
#if CONFIG_IS_ENABLED(DM_SERIAL)
static int smh_serial_getc(struct udevice *dev)
{
char ch = 0;
struct smh_serial_priv *priv = dev_get_priv(dev);
if (priv->infd < 0)
return smh_getc();
smh_read(priv->infd, &ch, sizeof(ch));
return ch;
}
static int smh_serial_putc(struct udevice *dev, const char ch)
{
smh_putc(ch);
return 0;
}
serial: smh: Implement puts for DM This adds an implementation of puts for DM. The implementation is not as clean as for the non-DM puts because we have to handle non-nul-terminated string. We also handle short writes (though these are probably very unusual). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-04 18:18:00 +00:00
static ssize_t smh_serial_puts(struct udevice *dev, const char *s, size_t len)
{
int ret;
struct smh_serial_priv *priv = dev_get_priv(dev);
unsigned long written;
if (priv->outfd < 0) {
char *buf;
/* Try and avoid a copy if we can */
if (!s[len + 1]) {
smh_puts(s);
return len;
}
buf = strndup(s, len);
serial: smh: Check return value of strndup strndup can fail. Check for it. Fixes: 4855b39be ("serial: smh: Implement puts for DM") Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-22 18:50:23 +00:00
if (!buf)
return -ENOMEM;
serial: smh: Implement puts for DM This adds an implementation of puts for DM. The implementation is not as clean as for the non-DM puts because we have to handle non-nul-terminated string. We also handle short writes (though these are probably very unusual). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-04 18:18:00 +00:00
smh_puts(buf);
free(buf);
return len;
}
ret = smh_write(priv->outfd, s, len, &written);
if (written)
return written;
return ret;
}
serial: smh: Fake tstc ARM semihosting provides no provisions for determining if there is pending input. The only way to determine if there is console input is to do a read (and block until the user types something). For this reason, we always return true for tstc (since you will always get input if you try). However, this behavior can cause problems for code which expects tstc to eventually be empty. In query_console_serial, there is the following construct: /* empty input buffer */ while (tstc()) getchar(); with the current implementation, this effectively turns into an infinite loop. To avoid this, fake tstc by returning false half of the time. This is generally OK because the other common construct looks like do { if (tstc()) process(getchar()); } while (!timeout()); so it's fine if we only read a new character every other loop. This will break things like CYGACC_COMM_IF_GETC_TIMEOUT, but that could be reworked to test on the timeout instead of calling tstc again (and ymodem over semihosted serial is not that useful in the first place). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-05-17 17:55:07 +00:00
static int smh_serial_pending(struct udevice *dev, bool input)
{
struct smh_serial_priv *priv = dev_get_priv(dev);
if (input)
return priv->counter++ & 1;
return false;
}
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
static const struct dm_serial_ops smh_serial_ops = {
.putc = smh_serial_putc,
serial: smh: Implement puts for DM This adds an implementation of puts for DM. The implementation is not as clean as for the non-DM puts because we have to handle non-nul-terminated string. We also handle short writes (though these are probably very unusual). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-04 18:18:00 +00:00
.puts = smh_serial_puts,
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
.getc = smh_serial_getc,
serial: smh: Fake tstc ARM semihosting provides no provisions for determining if there is pending input. The only way to determine if there is console input is to do a read (and block until the user types something). For this reason, we always return true for tstc (since you will always get input if you try). However, this behavior can cause problems for code which expects tstc to eventually be empty. In query_console_serial, there is the following construct: /* empty input buffer */ while (tstc()) getchar(); with the current implementation, this effectively turns into an infinite loop. To avoid this, fake tstc by returning false half of the time. This is generally OK because the other common construct looks like do { if (tstc()) process(getchar()); } while (!timeout()); so it's fine if we only read a new character every other loop. This will break things like CYGACC_COMM_IF_GETC_TIMEOUT, but that could be reworked to test on the timeout instead of calling tstc again (and ymodem over semihosted serial is not that useful in the first place). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-05-17 17:55:07 +00:00
.pending = smh_serial_pending,
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
};
serial: smh: Initialize serial only if semihosting is enabled If semihosting is disabled, then the user has no debugger attached, and will not see any messages. Don't create a serial device in this instance, to (hopefully) fall back on another working serial device. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-03-22 20:59:32 +00:00
static int smh_serial_bind(struct udevice *dev)
{
if (semihosting_enabled())
return 0;
return -ENOENT;
}
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
static int smh_serial_probe(struct udevice *dev)
{
struct smh_serial_priv *priv = dev_get_priv(dev);
priv->infd = smh_open(":tt", MODE_READ);
serial: smh: Implement puts for DM This adds an implementation of puts for DM. The implementation is not as clean as for the non-DM puts because we have to handle non-nul-terminated string. We also handle short writes (though these are probably very unusual). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-04 18:18:00 +00:00
priv->outfd = smh_open(":tt", MODE_WRITE);
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
return 0;
}
U_BOOT_DRIVER(smh_serial) = {
.name = "serial_semihosting",
.id = UCLASS_SERIAL,
serial: smh: Initialize serial only if semihosting is enabled If semihosting is disabled, then the user has no debugger attached, and will not see any messages. Don't create a serial device in this instance, to (hopefully) fall back on another working serial device. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-03-22 20:59:32 +00:00
.bind = smh_serial_bind,
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
.probe = smh_serial_probe,
.priv_auto = sizeof(struct smh_serial_priv),
.ops = &smh_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};
U_BOOT_DRVINFO(smh_serial) = {
.name = "serial_semihosting",
};
#else /* DM_SERIAL */
static int infd = -ENODEV;
static int outfd = -ENODEV;
serial: smh: Fake tstc ARM semihosting provides no provisions for determining if there is pending input. The only way to determine if there is console input is to do a read (and block until the user types something). For this reason, we always return true for tstc (since you will always get input if you try). However, this behavior can cause problems for code which expects tstc to eventually be empty. In query_console_serial, there is the following construct: /* empty input buffer */ while (tstc()) getchar(); with the current implementation, this effectively turns into an infinite loop. To avoid this, fake tstc by returning false half of the time. This is generally OK because the other common construct looks like do { if (tstc()) process(getchar()); } while (!timeout()); so it's fine if we only read a new character every other loop. This will break things like CYGACC_COMM_IF_GETC_TIMEOUT, but that could be reworked to test on the timeout instead of calling tstc again (and ymodem over semihosted serial is not that useful in the first place). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-05-17 17:55:07 +00:00
static unsigned counter = 1;
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
static int smh_serial_start(void)
{
infd = smh_open(":tt", MODE_READ);
outfd = smh_open(":tt", MODE_WRITE);
return 0;
}
static int smh_serial_stop(void)
{
if (outfd >= 0)
smh_close(outfd);
return 0;
}
static void smh_serial_setbrg(void)
{
}
static int smh_serial_getc(void)
{
char ch = 0;
if (infd < 0)
return smh_getc();
smh_read(infd, &ch, sizeof(ch));
return ch;
}
static int smh_serial_tstc(void)
{
serial: smh: Fake tstc ARM semihosting provides no provisions for determining if there is pending input. The only way to determine if there is console input is to do a read (and block until the user types something). For this reason, we always return true for tstc (since you will always get input if you try). However, this behavior can cause problems for code which expects tstc to eventually be empty. In query_console_serial, there is the following construct: /* empty input buffer */ while (tstc()) getchar(); with the current implementation, this effectively turns into an infinite loop. To avoid this, fake tstc by returning false half of the time. This is generally OK because the other common construct looks like do { if (tstc()) process(getchar()); } while (!timeout()); so it's fine if we only read a new character every other loop. This will break things like CYGACC_COMM_IF_GETC_TIMEOUT, but that could be reworked to test on the timeout instead of calling tstc again (and ymodem over semihosted serial is not that useful in the first place). Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-05-17 17:55:07 +00:00
return counter++ & 1;
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
}
static void smh_serial_puts(const char *s)
{
ulong unused;
if (outfd < 0)
smh_puts(s);
else
smh_write(outfd, s, strlen(s), &unused);
}
struct serial_device serial_smh_device = {
.name = "serial_smh",
.start = smh_serial_start,
.stop = smh_serial_stop,
.setbrg = smh_serial_setbrg,
.getc = smh_serial_getc,
.tstc = smh_serial_tstc,
.putc = smh_putc,
.puts = smh_serial_puts,
};
void smh_serial_initialize(void)
{
serial: smh: Initialize serial only if semihosting is enabled If semihosting is disabled, then the user has no debugger attached, and will not see any messages. Don't create a serial device in this instance, to (hopefully) fall back on another working serial device. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-03-22 20:59:32 +00:00
if (semihosting_enabled())
serial_register(&serial_smh_device);
serial: Add semihosting driver This adds a serial driver which uses semihosting calls to read and write to the host's console. For convenience, if CONFIG_DM_SERIAL is enabled, we will instantiate a serial driver. This allows users to enable this driver (which has no physical device) without modifying their device trees or board files. We also implement a non-DM driver for SPL, or for much faster output in U-Boot proper. There are three ways to print to the console: Method Baud ================== ===== smh_putc in a loop 170 smh_puts 1600 smh_write with :tt 20000 ================== ===== These speeds were measured using a 175 character message with a J-Link adapter. For reference, U-Boot typically prints around 2700 characters during boot on this board. There are two major factors affecting the speed of these functions. First, each breakpoint incurs a delay. Second, each debugger memory transaction incurs a delay. smh_putc has a breakpoint and memory transaction for every character. smh_puts has one breakpoint, but still has to use a transaction for every character. This is because we don't know the length up front, so OpenOCD has to check if each character is nul. smh_write has only one breakpoint and one memory transfer. DM serial drivers can only implement a putc interface, so we are stuck with the slowest API. Non-DM drivers can implement puts, which is vastly more efficient. When the driver starts up, we try to open :tt. Since this is an extension, this may fail. If it does, we fall back to smh_puts. We don't check :semihosting-features, since there are nonconforming implementations (OpenOCD) which don't implement it (but *do* implement :tt). Some semihosting implementations (QEMU) don't handle READC properly. To work around this, we try to use open/read (much like for stdin) if possible. There is no non-blocking I/O available, so we don't implement pending. This will cause __serial_tstc to always return true. If CONFIG_SERIAL_RX_BUFFER is enabled, _serial_tstc will try and read characters forever. To avoid this, we depend on this config being disabled. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-22 20:59:24 +00:00
}
__weak struct serial_device *default_serial_console(void)
{
return &serial_smh_device;
}
#endif
#ifdef CONFIG_DEBUG_UART_SEMIHOSTING
#include <debug_uart.h>
static inline void _debug_uart_init(void)
{
}
static inline void _debug_uart_putc(int c)
{
smh_putc(c);
}
DEBUG_UART_FUNCS
#endif
Reference in a new issue Copy permalink