mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 02:33:07 +00:00
67 lines
1.6 KiB
ReStructuredText
67 lines
1.6 KiB
ReStructuredText
|
.. SPDX-License-Identifier: GPL-2.0+:
|
||
|
|
|
||
|
|
bootz command
|
||
|
|
=============
|
||
|
|
|
||
|
|
Synopsis
|
||
|
|
--------
|
||
|
|
|
||
|
|
::
|
||
|
|
|
||
|
|
bootz [<addr> [<initrd>[:<size>]] [<fdt>]]
|
||
|
|
|
||
|
|
Description
|
||
|
|
-----------
|
||
|
|
|
||
|
|
The bootz command is used to boot a Linux kernel in 'zImage' format.
|
||
|
|
|
||
|
|
addr
|
||
|
|
address of kernel image, defaults to the value of the environment
|
||
|
|
variable $loadaddr.
|
||
|
|
|
||
|
|
initrd
|
||
|
|
address of the initial RAM disk. Use '-' to boot a kernel with a device
|
||
|
|
tree but without an initial RAM disk.
|
||
|
|
|
||
|
|
size
|
||
|
|
size of the initial RAM disk. This parameter must be specified for raw
|
||
|
|
initial RAM disks.
|
||
|
|
|
||
|
|
fdt
|
||
|
|
address of the device tree.
|
||
|
|
|
||
|
|
Example
|
||
|
|
-------
|
||
|
|
|
||
|
|
This is the boot log of an OrangePi PC board:
|
||
|
|
|
||
|
|
::
|
||
|
|
|
||
|
|
=> load mmc 0:2 $fdt_addr_r dtb
|
||
|
|
23093 bytes read in 7 ms (3.1 MiB/s)
|
||
|
|
=> load mmc 0:2 $kernel_addr_r vmlinuz
|
||
|
|
5079552 bytes read in 215 ms (22.5 MiB/s)
|
||
|
|
=> load mmc 0:2 $ramdisk_addr_r initrd.img
|
||
|
|
23854965 bytes read in 995 ms (22.9 MiB/s)
|
||
|
|
=> bootz $kernel_addr_r $ramdisk_addr_r:$filesize $fdt_addr_r
|
||
|
|
Kernel image @ 0x42000000 [ 0x000000 - 0x4d8200 ]
|
||
|
|
## Flattened Device Tree blob at 43000000
|
||
|
|
Booting using the fdt blob at 0x43000000
|
||
|
|
EHCI failed to shut down host controller.
|
||
|
|
Loading Ramdisk to 48940000, end 49ffff75 ... OK
|
||
|
|
Loading Device Tree to 48937000, end 4893fa34 ... OK
|
||
|
|
|
||
|
|
Starting kernel ...
|
||
|
|
|
||
|
|
Configuration
|
||
|
|
-------------
|
||
|
|
|
||
|
|
The bootz command is only available if CONFIG_CMD_BOOTZ=y.
|
||
|
|
|
||
|
|
Return value
|
||
|
|
------------
|
||
|
|
|
||
|
|
Normally this command does not return. If an error occurs, the return value $?
|
||
|
|
is set to 1 (false). If the operating system returns to U-Boot, the system is
|
||
|
|
reset.
|