Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-03 18:10:13 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/axp_pmic.h

59 lines
1.3 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
sunxi: power: Unify axp pmic function names Stop prefixing the axp functions for setting voltages, etc. with the model number, there ever is only one pmic driver built into u-boot, this allows simplifying the callers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-03 13:18:33 +00:00
/*
* (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
*
* X-Powers AX Power Management IC support header
*/
#ifndef _AXP_PMIC_H_
include: axp_pmic: Add missing header guard definition This header attempted to avoid multiple inclusion using a header guard. But the preprocessor symbol was never defined, so the guard had no effect. Fix this by defining the symbol. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-08-22 23:18:03 +00:00
#define _AXP_PMIC_H_
sunxi: power: Unify axp pmic function names Stop prefixing the axp functions for setting voltages, etc. with the model number, there ever is only one pmic driver built into u-boot, this allows simplifying the callers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-03 13:18:33 +00:00
i2c: Add a DM_I2C driver for the sun6i P2WI controller This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the p2wi functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants. Move that to the common header, so it can be used by both interface implementations. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-08 05:17:20 +00:00
#include <stdbool.h>
sunxi: power: Unify axp pmic function names Stop prefixing the axp functions for setting voltages, etc. with the model number, there ever is only one pmic driver built into u-boot, this allows simplifying the callers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-03 13:18:33 +00:00
#include <axp152.h>
#include <axp209.h>
#include <axp221.h>
sunxi: Add support for AXP305 PMIC This PMIC can be found on H616 boards and it's very similar to AXP805 and AXP806. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11 20:11:33 +00:00
#include <axp305.h>
sunxi: power: add AXP809 support The A80 uses the AXP809 as its primary PMIC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-02 02:28:15 +00:00
#include <axp809.h>
sunxi: power: axp818: add support for axp818 driver AXP818 is rsb based PMIC and used on Allwinner A83T H8 Homlet dev board. It's registers are different and calculating reg config is different than that of earlier axp power ICs. DCDC1, DCDC2, DCDC3 and DCDC5 is implemented at the moment. all other voltages can be added subsequently. AXP datasheet is uploaded to wiki: http://linux-sunxi.org/File:AXP818_datasheet_Revision1.0.pdf Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-11-28 17:07:21 +00:00
#include <axp818.h>
sunxi: power: Unify axp pmic function names Stop prefixing the axp functions for setting voltages, etc. with the model number, there ever is only one pmic driver built into u-boot, this allows simplifying the callers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-03 13:18:33 +00:00
i2c: Add a DM_I2C driver for the sun6i P2WI controller This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the p2wi functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants. Move that to the common header, so it can be used by both interface implementations. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-08 05:17:20 +00:00
#define AXP_PMIC_MODE_REG 0x3e
#define AXP_PMIC_MODE_I2C 0x00
#define AXP_PMIC_MODE_P2WI 0x3e
i2c: Add a DM_I2C driver for the sun8i RSB controller This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the rsb functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants, so move that to the common header. There are only a couple of pairs of hardware/runtime addresses used across all PMIC variants. So far the code expected only the "primary" pair, but some PMICs like the AXP305 and AXP805 use the secondary pair, so add support for that to the DM driver as well. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-08 05:17:21 +00:00
#define AXP_PMIC_MODE_RSB 0x7c
#define AXP_PMIC_PRI_DEVICE_ADDR 0x3a3
#define AXP_PMIC_PRI_RUNTIME_ADDR 0x2d
#define AXP_PMIC_SEC_DEVICE_ADDR 0x745
#define AXP_PMIC_SEC_RUNTIME_ADDR 0x3a
i2c: Add a DM_I2C driver for the sun6i P2WI controller This bus controller is used to communicate with an X-Powers AXP PMIC. Currently, various drivers access PMIC registers through a platform- specific non-DM "pmic_bus" interface, which depends on the legacy I2C framework. In order to convert those drivers to use DM_PMIC, this bus needs a DM_I2C driver. Refactor the p2wi functions to take the base address as a parameter, and implement both the existing interface (which is still needed in SPL) and the DM_I2C interface on top of them. The register for switching between I2C/P2WI/RSB mode is the same across all PMIC variants. Move that to the common header, so it can be used by both interface implementations. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-10-08 05:17:20 +00:00
power: pmic: axp: Provide a variant ID in the driver data Subordinate regulator drivers can use this enumerated ID instead of matching the compatible string again. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-01-21 23:13:04 +00:00
enum {
AXP152_ID,
AXP202_ID,
AXP209_ID,
AXP221_ID,
AXP223_ID,
power: regulator: add AXP313 support The X-Powers AXP313a is a small PMIC with just three buck converters and three LDOs, one of which is actually fixed (so not modelled here). Add the compatible string and the respective regulator ranges to allow drivers to adjust voltages. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-10-17 13:12:44 +00:00
AXP313_ID,
power: pmic: axp: Provide a variant ID in the driver data Subordinate regulator drivers can use this enumerated ID instead of matching the compatible string again. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-01-21 23:13:04 +00:00
AXP803_ID,
AXP806_ID,
AXP809_ID,
AXP813_ID,
};
sunxi: power: Unify axp pmic function names Stop prefixing the axp functions for setting voltages, etc. with the model number, there ever is only one pmic driver built into u-boot, this allows simplifying the callers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-03 13:18:33 +00:00
int axp_set_dcdc1(unsigned int mvolt);
int axp_set_dcdc2(unsigned int mvolt);
int axp_set_dcdc3(unsigned int mvolt);
int axp_set_dcdc4(unsigned int mvolt);
int axp_set_dcdc5(unsigned int mvolt);
int axp_set_aldo1(unsigned int mvolt);
int axp_set_aldo2(unsigned int mvolt);
int axp_set_aldo3(unsigned int mvolt);
int axp_set_aldo4(unsigned int mvolt);
power: axp: merge separate DLDO functions into 1 Instead of one function for each DLDO regulator, make 1 function that takes an extra "index". Since the control bits for the DLDO regulators are contiguous, this makes the function very simple. This removes a lot of duplicate code. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-01-12 06:42:37 +00:00
int axp_set_dldo(int dldo_num, unsigned int mvolt);
sunxi: power: Unify axp pmic function names Stop prefixing the axp functions for setting voltages, etc. with the model number, there ever is only one pmic driver built into u-boot, this allows simplifying the callers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-03 13:18:33 +00:00
int axp_set_eldo(int eldo_num, unsigned int mvolt);
power: axp818: Add support for FLDOs The FLDOs on AXP818 PMIC normally provide power to CPUS and USB HSIC PHY on the A83T/H8. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-29 16:26:48 +00:00
int axp_set_fldo(int fldo_num, unsigned int mvolt);
sunxi: power: axp818: Add support for switch SW The AXP818 has a switchable output, SW. This is commonly used for controlling power to the LCD backlight. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-05-02 02:28:12 +00:00
int axp_set_sw(bool on);
sunxi: power: Unify axp pmic function names Stop prefixing the axp functions for setting voltages, etc. with the model number, there ever is only one pmic driver built into u-boot, this allows simplifying the callers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2015-10-03 13:18:33 +00:00
int axp_init(void);
int axp_get_sid(unsigned int *sid);
#endif
Reference in a new issue Copy permalink