u-boot/drivers/net/phy/aquantia.c

444 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Aquantia PHY drivers
*
* Copyright 2014 Freescale Semiconductor, Inc.
*/
#include <config.h>
#include <common.h>
#include <dm.h>
#include <phy.h>
#include <crc.h>
#include <malloc.h>
#include <asm/byteorder.h>
#include <fs.h>
#define AQUNTIA_10G_CTL 0x20
#define AQUNTIA_VENDOR_P1 0xc400
#define AQUNTIA_SPEED_LSB_MASK 0x2000
#define AQUNTIA_SPEED_MSB_MASK 0x40
/* registers in MDIO_MMD_VEND1 region */
#define GLOBAL_FIRMWARE_ID 0x20
#define GLOBAL_FAULT 0xc850
#define GLOBAL_RSTATUS_1 0xc885
#define GLOBAL_STANDARD_CONTROL 0x0
#define SOFT_RESET BIT(15)
#define LOW_POWER BIT(11)
#define MAILBOX_CONTROL 0x0200
#define MAILBOX_EXECUTE BIT(15)
#define MAILBOX_WRITE BIT(14)
#define MAILBOX_RESET_CRC BIT(12)
#define MAILBOX_BUSY BIT(8)
#define MAILBOX_CRC 0x0201
#define MAILBOX_ADDR_MSW 0x0202
#define MAILBOX_ADDR_LSW 0x0203
#define MAILBOX_DATA_MSW 0x0204
#define MAILBOX_DATA_LSW 0x0205
#define UP_CONTROL 0xc001
#define UP_RESET BIT(15)
#define UP_RUN_STALL_OVERRIDE BIT(6)
#define UP_RUN_STALL BIT(0)
/* addresses of memory segments in the phy */
#define DRAM_BASE_ADDR 0x3FFE0000
#define IRAM_BASE_ADDR 0x40000000
/* firmware image format constants */
#define VERSION_STRING_SIZE 0x40
#define VERSION_STRING_OFFSET 0x0200
#define HEADER_OFFSET 0x300
#pragma pack(1)
struct fw_header {
u8 padding[4];
u8 iram_offset[3];
u8 iram_size[3];
u8 dram_offset[3];
u8 dram_size[3];
};
#pragma pack()
#if defined(CONFIG_PHY_AQUANTIA_UPLOAD_FW)
static int aquantia_read_fw(u8 **fw_addr, size_t *fw_length)
{
loff_t length, read;
int ret;
void *addr = NULL;
*fw_addr = NULL;
*fw_length = 0;
debug("Loading Acquantia microcode from %s %s\n",
CONFIG_PHY_AQUANTIA_FW_PART, CONFIG_PHY_AQUANTIA_FW_NAME);
ret = fs_set_blk_dev("mmc", CONFIG_PHY_AQUANTIA_FW_PART, FS_TYPE_ANY);
if (ret < 0)
goto cleanup;
ret = fs_size(CONFIG_PHY_AQUANTIA_FW_NAME, &length);
if (ret < 0)
goto cleanup;
addr = malloc(length);
if (!addr) {
ret = -ENOMEM;
goto cleanup;
}
ret = fs_set_blk_dev("mmc", CONFIG_PHY_AQUANTIA_FW_PART, FS_TYPE_ANY);
if (ret < 0)
goto cleanup;
ret = fs_read(CONFIG_PHY_AQUANTIA_FW_NAME, (ulong)addr, 0, length,
&read);
if (ret < 0)
goto cleanup;
*fw_addr = addr;
*fw_length = length;
debug("Found Acquantia microcode.\n");
cleanup:
if (ret < 0) {
printf("loading firmware file %s %s failed with error %d\n",
CONFIG_PHY_AQUANTIA_FW_PART,
CONFIG_PHY_AQUANTIA_FW_NAME, ret);
free(addr);
}
return ret;
}
/* load data into the phy's memory */
static int aquantia_load_memory(struct phy_device *phydev, u32 addr,
const u8 *data, size_t len)
{
size_t pos;
u16 crc = 0, up_crc;
phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_CONTROL, MAILBOX_RESET_CRC);
phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_ADDR_MSW, addr >> 16);
phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_ADDR_LSW, addr & 0xfffc);
for (pos = 0; pos < len; pos += min(sizeof(u32), len - pos)) {
u32 word = 0;
memcpy(&word, &data[pos], min(sizeof(u32), len - pos));
phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_DATA_MSW,
(word >> 16));
phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_DATA_LSW,
word & 0xffff);
phy_write(phydev, MDIO_MMD_VEND1, MAILBOX_CONTROL,
MAILBOX_EXECUTE | MAILBOX_WRITE);
/* keep a big endian CRC to match the phy processor */
word = cpu_to_be32(word);
crc = crc16_ccitt(crc, (u8 *)&word, sizeof(word));
}
up_crc = phy_read(phydev, MDIO_MMD_VEND1, MAILBOX_CRC);
if (crc != up_crc) {
printf("%s crc mismatch: calculated 0x%04hx phy 0x%04hx\n",
phydev->dev->name, crc, up_crc);
return -EINVAL;
}
return 0;
}
static u32 unpack_u24(const u8 *data)
{
return (data[2] << 16) + (data[1] << 8) + data[0];
}
static int aquantia_upload_firmware(struct phy_device *phydev)
{
int ret;
u8 *addr = NULL;
size_t fw_length = 0;
u16 calculated_crc, read_crc;
char version[VERSION_STRING_SIZE];
u32 primary_offset, iram_offset, iram_size, dram_offset, dram_size;
const struct fw_header *header;
ret = aquantia_read_fw(&addr, &fw_length);
if (ret != 0)
return ret;
read_crc = (addr[fw_length - 2] << 8) | addr[fw_length - 1];
calculated_crc = crc16_ccitt(0, addr, fw_length - 2);
if (read_crc != calculated_crc) {
printf("%s bad firmware crc: file 0x%04x calculated 0x%04x\n",
phydev->dev->name, read_crc, calculated_crc);
ret = -EINVAL;
goto done;
}
/* Find the DRAM and IRAM sections within the firmware file. */
primary_offset = ((addr[9] & 0xf) << 8 | addr[8]) << 12;
header = (struct fw_header *)&addr[primary_offset + HEADER_OFFSET];
iram_offset = primary_offset + unpack_u24(header->iram_offset);
iram_size = unpack_u24(header->iram_size);
dram_offset = primary_offset + unpack_u24(header->dram_offset);
dram_size = unpack_u24(header->dram_size);
debug("primary %d iram offset=%d size=%d dram offset=%d size=%d\n",
primary_offset, iram_offset, iram_size, dram_offset, dram_size);
strlcpy(version, (char *)&addr[dram_offset + VERSION_STRING_OFFSET],
VERSION_STRING_SIZE);
printf("%s loading firmare version '%s'\n", phydev->dev->name, version);
/* stall the microcprocessor */
phy_write(phydev, MDIO_MMD_VEND1, UP_CONTROL,
UP_RUN_STALL | UP_RUN_STALL_OVERRIDE);
debug("loading dram 0x%08x from offset=%d size=%d\n",
DRAM_BASE_ADDR, dram_offset, dram_size);
ret = aquantia_load_memory(phydev, DRAM_BASE_ADDR, &addr[dram_offset],
dram_size);
if (ret != 0)
goto done;
debug("loading iram 0x%08x from offset=%d size=%d\n",
IRAM_BASE_ADDR, iram_offset, iram_size);
ret = aquantia_load_memory(phydev, IRAM_BASE_ADDR, &addr[iram_offset],
iram_size);
if (ret != 0)
goto done;
/* make sure soft reset and low power mode are clear */
phy_write(phydev, MDIO_MMD_VEND1, GLOBAL_STANDARD_CONTROL, 0);
/* Release the microprocessor. UP_RESET must be held for 100 usec. */
phy_write(phydev, MDIO_MMD_VEND1, UP_CONTROL,
UP_RUN_STALL | UP_RUN_STALL_OVERRIDE | UP_RESET);
udelay(100);
phy_write(phydev, MDIO_MMD_VEND1, UP_CONTROL, UP_RUN_STALL_OVERRIDE);
printf("%s firmare loading done.\n", phydev->dev->name);
done:
free(addr);
return ret;
}
#else
static int aquantia_upload_firmware(struct phy_device *phydev)
{
printf("ERROR %s firmware loading disabled.\n", phydev->dev->name);
return -1;
}
#endif
int aquantia_config(struct phy_device *phydev)
{
u32 val, id, rstatus, fault;
id = phy_read(phydev, MDIO_MMD_VEND1, GLOBAL_FIRMWARE_ID);
rstatus = phy_read(phydev, MDIO_MMD_VEND1, GLOBAL_RSTATUS_1);
fault = phy_read(phydev, MDIO_MMD_VEND1, GLOBAL_FAULT);
if (id != 0)
printf("%s running firmware version %X.%X.%X\n",
phydev->dev->name, (id >> 8), id & 0xff,
(rstatus >> 4) & 0xf);
if (fault != 0)
printf("%s fault 0x%04x detected\n", phydev->dev->name, fault);
if (id == 0 || fault != 0) {
int ret;
ret = aquantia_upload_firmware(phydev);
if (ret != 0)
return ret;
}
val = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR);
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
/* 1000BASE-T mode */
phydev->advertising = SUPPORTED_1000baseT_Full;
phydev->supported = phydev->advertising;
val = (val & ~AQUNTIA_SPEED_LSB_MASK) | AQUNTIA_SPEED_MSB_MASK;
phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val);
} else if (phydev->interface == PHY_INTERFACE_MODE_XGMII) {
/* 10GBASE-T mode */
phydev->advertising = SUPPORTED_10000baseT_Full;
phydev->supported = phydev->advertising;
if (!(val & AQUNTIA_SPEED_LSB_MASK) ||
!(val & AQUNTIA_SPEED_MSB_MASK))
phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR,
AQUNTIA_SPEED_LSB_MASK |
AQUNTIA_SPEED_MSB_MASK);
} else if (phydev->interface == PHY_INTERFACE_MODE_SGMII_2500) {
/* 2.5GBASE-T mode */
phydev->advertising = SUPPORTED_1000baseT_Full;
phydev->supported = phydev->advertising;
phy_write(phydev, MDIO_MMD_AN, AQUNTIA_10G_CTL, 1);
phy_write(phydev, MDIO_MMD_AN, AQUNTIA_VENDOR_P1, 0x9440);
} else if (phydev->interface == PHY_INTERFACE_MODE_MII) {
/* 100BASE-TX mode */
phydev->advertising = SUPPORTED_100baseT_Full;
phydev->supported = phydev->advertising;
val = (val & ~AQUNTIA_SPEED_MSB_MASK) | AQUNTIA_SPEED_LSB_MASK;
phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val);
}
return 0;
}
int aquantia_startup(struct phy_device *phydev)
{
u32 reg, speed;
int i = 0;
phydev->duplex = DUPLEX_FULL;
/* if the AN is still in progress, wait till timeout. */
phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
if (!(reg & MDIO_AN_STAT1_COMPLETE)) {
printf("%s Waiting for PHY auto negotiation to complete",
phydev->dev->name);
do {
udelay(1000);
reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
if ((i++ % 500) == 0)
printf(".");
} while (!(reg & MDIO_AN_STAT1_COMPLETE) &&
i < (4 * PHY_ANEG_TIMEOUT));
if (i > PHY_ANEG_TIMEOUT)
printf(" TIMEOUT !\n");
}
/* Read twice because link state is latched and a
* read moves the current state into the register */
phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
reg = phy_read(phydev, MDIO_MMD_AN, MDIO_STAT1);
if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
phydev->link = 0;
else
phydev->link = 1;
speed = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR);
if (speed & AQUNTIA_SPEED_MSB_MASK) {
if (speed & AQUNTIA_SPEED_LSB_MASK)
phydev->speed = SPEED_10000;
else
phydev->speed = SPEED_1000;
} else {
if (speed & AQUNTIA_SPEED_LSB_MASK)
phydev->speed = SPEED_100;
else
phydev->speed = SPEED_10;
}
return 0;
}
struct phy_driver aq1202_driver = {
.name = "Aquantia AQ1202",
.uid = 0x3a1b445,
.mask = 0xfffffff0,
.features = PHY_10G_FEATURES,
.mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
MDIO_MMD_PHYXS | MDIO_MMD_AN |
MDIO_MMD_VEND1),
.config = &aquantia_config,
.startup = &aquantia_startup,
.shutdown = &gen10g_shutdown,
};
struct phy_driver aq2104_driver = {
.name = "Aquantia AQ2104",
.uid = 0x3a1b460,
.mask = 0xfffffff0,
.features = PHY_10G_FEATURES,
.mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
MDIO_MMD_PHYXS | MDIO_MMD_AN |
MDIO_MMD_VEND1),
.config = &aquantia_config,
.startup = &aquantia_startup,
.shutdown = &gen10g_shutdown,
};
struct phy_driver aqr105_driver = {
.name = "Aquantia AQR105",
.uid = 0x3a1b4a2,
.mask = 0xfffffff0,
.features = PHY_10G_FEATURES,
.mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
MDIO_MMD_PHYXS | MDIO_MMD_AN |
MDIO_MMD_VEND1),
.config = &aquantia_config,
.startup = &aquantia_startup,
.shutdown = &gen10g_shutdown,
};
struct phy_driver aqr106_driver = {
.name = "Aquantia AQR106",
.uid = 0x3a1b4d0,
.mask = 0xfffffff0,
.features = PHY_10G_FEATURES,
.mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
MDIO_MMD_PHYXS | MDIO_MMD_AN |
MDIO_MMD_VEND1),
.config = &aquantia_config,
.startup = &aquantia_startup,
.shutdown = &gen10g_shutdown,
};
struct phy_driver aqr107_driver = {
.name = "Aquantia AQR107",
.uid = 0x3a1b4e0,
.mask = 0xfffffff0,
.features = PHY_10G_FEATURES,
.mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
MDIO_MMD_PHYXS | MDIO_MMD_AN |
MDIO_MMD_VEND1),
.config = &aquantia_config,
.startup = &aquantia_startup,
.shutdown = &gen10g_shutdown,
};
struct phy_driver aqr405_driver = {
.name = "Aquantia AQR405",
.uid = 0x3a1b4b2,
.mask = 0xfffffff0,
.features = PHY_10G_FEATURES,
.mmds = (MDIO_MMD_PMAPMD | MDIO_MMD_PCS|
MDIO_MMD_PHYXS | MDIO_MMD_AN |
MDIO_MMD_VEND1),
.config = &aquantia_config,
.startup = &aquantia_startup,
.shutdown = &gen10g_shutdown,
};
int phy_aquantia_init(void)
{
phy_register(&aq1202_driver);
phy_register(&aq2104_driver);
phy_register(&aqr105_driver);
phy_register(&aqr106_driver);
phy_register(&aqr107_driver);
phy_register(&aqr405_driver);
return 0;
}