u-boot/disk/part.c

629 lines
14 KiB
C
Raw Normal View History

2002-08-17 09:36:01 +00:00
/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
2002-08-17 09:36:01 +00:00
*/
#include <common.h>
#include <command.h>
#include <ide.h>
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
#include <malloc.h>
#include <part.h>
2002-08-17 09:36:01 +00:00
#undef PART_DEBUG
#ifdef PART_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
struct block_drvr {
char *name;
block_dev_desc_t* (*get_dev)(int dev);
};
static const struct block_drvr block_drvr[] = {
#if defined(CONFIG_CMD_IDE)
{ .name = "ide", .get_dev = ide_get_dev, },
#endif
#if defined(CONFIG_CMD_SATA)
{.name = "sata", .get_dev = sata_get_dev, },
#endif
#if defined(CONFIG_CMD_SCSI)
{ .name = "scsi", .get_dev = scsi_get_dev, },
#endif
#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
{ .name = "usb", .get_dev = usb_stor_get_dev, },
#endif
#if defined(CONFIG_MMC)
{ .name = "mmc", .get_dev = mmc_get_dev, },
#endif
#if defined(CONFIG_SYSTEMACE)
{ .name = "ace", .get_dev = systemace_get_dev, },
#endif
{ },
};
DECLARE_GLOBAL_DATA_PTR;
#ifdef HAVE_BLOCK_DEVICE
block_dev_desc_t *get_dev(const char *ifname, int dev)
{
const struct block_drvr *drvr = block_drvr;
block_dev_desc_t* (*reloc_get_dev)(int dev);
char *name;
if (!ifname)
return NULL;
name = drvr->name;
#ifdef CONFIG_NEEDS_MANUAL_RELOC
name += gd->reloc_off;
#endif
while (drvr->name) {
name = drvr->name;
reloc_get_dev = drvr->get_dev;
#ifdef CONFIG_NEEDS_MANUAL_RELOC
name += gd->reloc_off;
reloc_get_dev += gd->reloc_off;
#endif
if (strncmp(ifname, name, strlen(name)) == 0)
return reloc_get_dev(dev);
drvr++;
}
return NULL;
}
#else
block_dev_desc_t *get_dev(const char *ifname, int dev)
{
return NULL;
}
#endif
#ifdef HAVE_BLOCK_DEVICE
2002-08-17 09:36:01 +00:00
/* ------------------------------------------------------------------------- */
/*
* reports device info to the user
*/
#ifdef CONFIG_LBA48
typedef uint64_t lba512_t;
#else
typedef lbaint_t lba512_t;
#endif
2002-08-17 09:36:01 +00:00
/*
* Overflowless variant of (block_count * mul_by / div_by)
* when div_by > mul_by
*/
static lba512_t lba512_muldiv (lba512_t block_count, lba512_t mul_by, lba512_t div_by)
{
lba512_t bc_quot, bc_rem;
/* x * m / d == x / d * m + (x % d) * m / d */
bc_quot = block_count / div_by;
bc_rem = block_count - div_by * bc_quot;
return bc_quot * mul_by + (bc_rem * mul_by) / div_by;
}
void dev_print (block_dev_desc_t *dev_desc)
{
lba512_t lba512; /* number of blocks if 512bytes block size */
if (dev_desc->type == DEV_TYPE_UNKNOWN) {
puts ("not available\n");
return;
}
switch (dev_desc->if_type) {
case IF_TYPE_SCSI:
printf ("(%d:%d) Vendor: %s Prod.: %s Rev: %s\n",
dev_desc->target,dev_desc->lun,
2002-08-17 09:36:01 +00:00
dev_desc->vendor,
dev_desc->product,
dev_desc->revision);
break;
case IF_TYPE_ATAPI:
case IF_TYPE_IDE:
case IF_TYPE_SATA:
printf ("Model: %s Firm: %s Ser#: %s\n",
dev_desc->vendor,
dev_desc->revision,
dev_desc->product);
break;
case IF_TYPE_SD:
case IF_TYPE_MMC:
case IF_TYPE_USB:
printf ("Vendor: %s Rev: %s Prod: %s\n",
dev_desc->vendor,
dev_desc->revision,
dev_desc->product);
break;
case IF_TYPE_DOC:
puts("device type DOC\n");
return;
case IF_TYPE_UNKNOWN:
puts("device type unknown\n");
return;
default:
printf("Unhandled device type: %i\n", dev_desc->if_type);
return;
2002-08-17 09:36:01 +00:00
}
puts (" Type: ");
if (dev_desc->removable)
puts ("Removable ");
switch (dev_desc->type & 0x1F) {
case DEV_TYPE_HARDDISK:
puts ("Hard Disk");
break;
case DEV_TYPE_CDROM:
puts ("CD ROM");
break;
case DEV_TYPE_OPDISK:
puts ("Optical Device");
break;
case DEV_TYPE_TAPE:
puts ("Tape");
break;
default:
printf ("# %02X #", dev_desc->type & 0x1F);
break;
2002-08-17 09:36:01 +00:00
}
puts ("\n");
if (dev_desc->lba > 0L && dev_desc->blksz > 0L) {
2002-08-17 09:36:01 +00:00
ulong mb, mb_quot, mb_rem, gb, gb_quot, gb_rem;
lbaint_t lba;
lba = dev_desc->lba;
2002-08-17 09:36:01 +00:00
lba512 = (lba * (dev_desc->blksz/512));
2002-08-17 09:36:01 +00:00
/* round to 1 digit */
mb = lba512_muldiv(lba512, 10, 2048); /* 2048 = (1024 * 1024) / 512 MB */
2002-08-17 09:36:01 +00:00
mb_quot = mb / 10;
mb_rem = mb - (10 * mb_quot);
gb = mb / 1024;
gb_quot = gb / 10;
gb_rem = gb - (10 * gb_quot);
#ifdef CONFIG_LBA48
if (dev_desc->lba48)
printf (" Supports 48-bit addressing\n");
#endif
#if defined(CONFIG_SYS_64BIT_LBA)
printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%Ld x %ld)\n",
mb_quot, mb_rem,
gb_quot, gb_rem,
lba,
dev_desc->blksz);
#else
2002-08-17 09:36:01 +00:00
printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\n",
mb_quot, mb_rem,
gb_quot, gb_rem,
(ulong)lba,
2002-08-17 09:36:01 +00:00
dev_desc->blksz);
#endif
2002-08-17 09:36:01 +00:00
} else {
puts (" Capacity: not available\n");
}
}
#endif
2002-08-17 09:36:01 +00:00
#ifdef HAVE_BLOCK_DEVICE
2002-08-17 09:36:01 +00:00
void init_part (block_dev_desc_t * dev_desc)
{
#ifdef CONFIG_ISO_PARTITION
if (test_part_iso(dev_desc) == 0) {
dev_desc->part_type = PART_TYPE_ISO;
return;
}
#endif
#ifdef CONFIG_MAC_PARTITION
if (test_part_mac(dev_desc) == 0) {
dev_desc->part_type = PART_TYPE_MAC;
return;
}
#endif
/* must be placed before DOS partition detection */
#ifdef CONFIG_EFI_PARTITION
if (test_part_efi(dev_desc) == 0) {
dev_desc->part_type = PART_TYPE_EFI;
return;
}
#endif
2002-08-17 09:36:01 +00:00
#ifdef CONFIG_DOS_PARTITION
if (test_part_dos(dev_desc) == 0) {
dev_desc->part_type = PART_TYPE_DOS;
return;
}
#endif
#ifdef CONFIG_AMIGA_PARTITION
if (test_part_amiga(dev_desc) == 0) {
dev_desc->part_type = PART_TYPE_AMIGA;
return;
}
#endif
dev_desc->part_type = PART_TYPE_UNKNOWN;
2002-08-17 09:36:01 +00:00
}
#if defined(CONFIG_MAC_PARTITION) || \
defined(CONFIG_DOS_PARTITION) || \
defined(CONFIG_ISO_PARTITION) || \
defined(CONFIG_AMIGA_PARTITION) || \
defined(CONFIG_EFI_PARTITION)
2002-08-17 09:36:01 +00:00
static void print_part_header (const char *type, block_dev_desc_t * dev_desc)
{
puts ("\nPartition Map for ");
switch (dev_desc->if_type) {
case IF_TYPE_IDE:
puts ("IDE");
break;
case IF_TYPE_SATA:
puts ("SATA");
break;
case IF_TYPE_SCSI:
puts ("SCSI");
break;
case IF_TYPE_ATAPI:
puts ("ATAPI");
break;
case IF_TYPE_USB:
puts ("USB");
break;
case IF_TYPE_DOC:
puts ("DOC");
break;
case IF_TYPE_MMC:
puts ("MMC");
break;
default:
puts ("UNKNOWN");
break;
2002-08-17 09:36:01 +00:00
}
printf (" device %d -- Partition Type: %s\n\n",
dev_desc->dev, type);
}
#endif /* any CONFIG_..._PARTITION */
2002-08-17 09:36:01 +00:00
void print_part (block_dev_desc_t * dev_desc)
{
switch (dev_desc->part_type) {
#ifdef CONFIG_MAC_PARTITION
case PART_TYPE_MAC:
PRINTF ("## Testing for valid MAC partition ##\n");
print_part_header ("MAC", dev_desc);
print_part_mac (dev_desc);
return;
#endif
#ifdef CONFIG_DOS_PARTITION
case PART_TYPE_DOS:
PRINTF ("## Testing for valid DOS partition ##\n");
print_part_header ("DOS", dev_desc);
print_part_dos (dev_desc);
return;
#endif
#ifdef CONFIG_ISO_PARTITION
case PART_TYPE_ISO:
PRINTF ("## Testing for valid ISO Boot partition ##\n");
print_part_header ("ISO", dev_desc);
print_part_iso (dev_desc);
return;
#endif
#ifdef CONFIG_AMIGA_PARTITION
case PART_TYPE_AMIGA:
PRINTF ("## Testing for a valid Amiga partition ##\n");
print_part_header ("AMIGA", dev_desc);
print_part_amiga (dev_desc);
return;
#endif
#ifdef CONFIG_EFI_PARTITION
case PART_TYPE_EFI:
PRINTF ("## Testing for valid EFI partition ##\n");
print_part_header ("EFI", dev_desc);
print_part_efi (dev_desc);
return;
#endif
2002-08-17 09:36:01 +00:00
}
puts ("## Unknown partition table\n");
}
#endif /* HAVE_BLOCK_DEVICE */
int get_partition_info(block_dev_desc_t *dev_desc, int part
, disk_partition_t *info)
{
#ifdef HAVE_BLOCK_DEVICE
#ifdef CONFIG_PARTITION_UUIDS
/* The common case is no UUID support */
info->uuid[0] = 0;
#endif
switch (dev_desc->part_type) {
#ifdef CONFIG_MAC_PARTITION
case PART_TYPE_MAC:
if (get_partition_info_mac(dev_desc, part, info) == 0) {
PRINTF("## Valid MAC partition found ##\n");
return 0;
}
break;
#endif
#ifdef CONFIG_DOS_PARTITION
case PART_TYPE_DOS:
if (get_partition_info_dos(dev_desc, part, info) == 0) {
PRINTF("## Valid DOS partition found ##\n");
return 0;
}
break;
#endif
#ifdef CONFIG_ISO_PARTITION
case PART_TYPE_ISO:
if (get_partition_info_iso(dev_desc, part, info) == 0) {
PRINTF("## Valid ISO boot partition found ##\n");
return 0;
}
break;
#endif
#ifdef CONFIG_AMIGA_PARTITION
case PART_TYPE_AMIGA:
if (get_partition_info_amiga(dev_desc, part, info) == 0) {
PRINTF("## Valid Amiga partition found ##\n");
return 0;
}
break;
#endif
#ifdef CONFIG_EFI_PARTITION
case PART_TYPE_EFI:
if (get_partition_info_efi(dev_desc, part, info) == 0) {
PRINTF("## Valid EFI partition found ##\n");
return 0;
}
break;
#endif
default:
break;
}
#endif /* HAVE_BLOCK_DEVICE */
return -1;
}
int get_device(const char *ifname, const char *dev_str,
block_dev_desc_t **dev_desc)
{
char *ep;
int dev;
dev = simple_strtoul(dev_str, &ep, 16);
if (*ep) {
printf("** Bad device specification %s %s **\n",
ifname, dev_str);
return -1;
}
*dev_desc = get_dev(ifname, dev);
if (!(*dev_desc) || ((*dev_desc)->type == DEV_TYPE_UNKNOWN)) {
printf("** Bad device %s %s **\n", ifname, dev_str);
return -1;
}
return dev;
}
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
#define PART_UNSPECIFIED -2
#define PART_AUTO -1
#define MAX_SEARCH_PARTITIONS 16
int get_device_and_partition(const char *ifname, const char *dev_part_str,
block_dev_desc_t **dev_desc,
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
disk_partition_t *info, int allow_whole_dev)
{
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
int ret = -1;
const char *part_str;
char *dup_str = NULL;
const char *dev_str;
int dev;
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
char *ep;
int p;
int part;
disk_partition_t tmpinfo;
/*
* For now, we have a special case for sandbox, since there is no
* real block device support.
*/
if (0 == strcmp(ifname, "host")) {
*dev_desc = NULL;
info->start = info->size = info->blksz = 0;
info->bootable = 0;
strcpy((char *)info->type, BOOT_PART_TYPE);
strcpy((char *)info->name, "Sandbox host");
#ifdef CONFIG_PARTITION_UUIDS
info->uuid[0] = 0;
#endif
return 0;
}
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
/* If no dev_part_str, use bootdevice environment variable */
if (!dev_part_str || !strlen(dev_part_str) ||
!strcmp(dev_part_str, "-"))
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
dev_part_str = getenv("bootdevice");
/* If still no dev_part_str, it's an error */
if (!dev_part_str) {
printf("** No device specified **\n");
goto cleanup;
}
/* Separate device and partition ID specification */
part_str = strchr(dev_part_str, ':');
if (part_str) {
dup_str = strdup(dev_part_str);
dup_str[part_str - dev_part_str] = 0;
dev_str = dup_str;
part_str++;
} else {
dev_str = dev_part_str;
}
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
/* Look up the device */
dev = get_device(ifname, dev_str, dev_desc);
if (dev < 0)
goto cleanup;
/* Convert partition ID string to number */
if (!part_str || !*part_str) {
part = PART_UNSPECIFIED;
} else if (!strcmp(part_str, "auto")) {
part = PART_AUTO;
} else {
/* Something specified -> use exactly that */
part = (int)simple_strtoul(part_str, &ep, 16);
/*
* Less than whole string converted,
* or request for whole device, but caller requires partition.
*/
if (*ep || (part == 0 && !allow_whole_dev)) {
printf("** Bad partition specification %s %s **\n",
ifname, dev_part_str);
goto cleanup;
}
}
/*
* No partition table on device,
* or user requested partition 0 (entire device).
*/
if (((*dev_desc)->part_type == PART_TYPE_UNKNOWN) ||
(part == 0)) {
if (!(*dev_desc)->lba) {
printf("** Bad device size - %s %s **\n", ifname,
dev_str);
goto cleanup;
}
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
/*
* If user specified a partition ID other than 0,
* or the calling command only accepts partitions,
* it's an error.
*/
if ((part > 0) || (!allow_whole_dev)) {
printf("** No partition table - %s %s **\n", ifname,
dev_str);
goto cleanup;
}
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
(*dev_desc)->log2blksz = LOG2((*dev_desc)->blksz);
info->start = 0;
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
info->size = (*dev_desc)->lba;
info->blksz = (*dev_desc)->blksz;
info->bootable = 0;
strcpy((char *)info->type, BOOT_PART_TYPE);
strcpy((char *)info->name, "Whole Disk");
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
#ifdef CONFIG_PARTITION_UUIDS
info->uuid[0] = 0;
#endif
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
ret = 0;
goto cleanup;
}
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
/*
* Now there's known to be a partition table,
* not specifying a partition means to pick partition 1.
*/
if (part == PART_UNSPECIFIED)
part = 1;
/*
* If user didn't specify a partition number, or did specify something
* other than "auto", use that partition number directly.
*/
if (part != PART_AUTO) {
ret = get_partition_info(*dev_desc, part, info);
if (ret) {
printf("** Invalid partition %d **\n", part);
goto cleanup;
}
} else {
/*
* Find the first bootable partition.
* If none are bootable, fall back to the first valid partition.
*/
part = 0;
for (p = 1; p <= MAX_SEARCH_PARTITIONS; p++) {
ret = get_partition_info(*dev_desc, p, info);
if (ret)
continue;
/*
* First valid partition, or new better partition?
* If so, save partition ID.
*/
if (!part || info->bootable)
part = p;
/* Best possible partition? Stop searching. */
if (info->bootable)
break;
/*
* We now need to search further for best possible.
* If we what we just queried was the best so far,
* save the info since we over-write it next loop.
*/
if (part == p)
tmpinfo = *info;
}
/* If we found any acceptable partition */
if (part) {
/*
* If we searched all possible partition IDs,
* return the first valid partition we found.
*/
if (p == MAX_SEARCH_PARTITIONS + 1)
*info = tmpinfo;
} else {
printf("** No valid partitions found **\n");
ret = -1;
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
goto cleanup;
}
}
if (strncmp((char *)info->type, BOOT_PART_TYPE, sizeof(info->type)) != 0) {
printf("** Invalid partition type \"%.32s\""
" (expect \"" BOOT_PART_TYPE "\")\n",
info->type);
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
ret = -1;
goto cleanup;
}
(*dev_desc)->log2blksz = LOG2((*dev_desc)->blksz);
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
ret = part;
goto cleanup;
disk: get_device_and_partition() "auto" partition and cleanup Rework get_device_and_partition() to: a) Implement a new partition ID of "auto", which requests that U-Boot search for the first "bootable" partition, and fall back to the first valid partition if none is found. This way, users don't need to specify an explicit partition in their commands. b) Make use of get_device(). c) Add parameter to indicate whether returning a whole device is acceptable, or whether a partition is mandatory. d) Make error-checking of the user's device-/partition-specification more complete. In particular, if strtoul() doesn't convert all characters, it's an error rather than just ignored. The resultant device/partition returned by the function will be as follows, based on whether the disk has a partition table (ptable) or not, and whether the calling command allows the whole device to be returned or not. (D and P are integers, P >= 1) D D: No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: device D partition 1 D:0 !allow_whole_dev: error allow_whole_dev: device D D:P No ptable: error ptable: device D partition P D:auto No ptable: !allow_whole_dev: error allow_whole_dev: device D ptable: first partition in device D with bootable flag set. If none, first valid paratition in device D. Note: In order to review this patch, it's probably easiest to simply look at the file contents post-application, rather than reading the patch itself. Signed-off-by: Rob Herring <rob.herring@calxeda.com> [swarren: Rob implemented scanning for bootable partitions. I fixed a couple of issues there, switched the syntax to ":auto", added the error-checking rework, and ":0" syntax for the whole device] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 09:50:57 +00:00
cleanup:
free(dup_str);
return ret;
}