Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 15:37:23 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-imx/mx7/clock.c

1135 lines
28 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
// SPDX-License-Identifier: GPL-2.0+
imx: imx7d: clock control module support * Add Clock control module (CCM) support * iMX7D SoC introduces 3 main clock sysmtem abstraction for clock root frequency generation denominated clock slices. Core clock slice: hihg speed clock for ARM core Bus clock slice: for bus clocks IP clock slice: Peripheral clocks * At system boot ROM enables PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET In u-boot, we have to: - Configure PFD3- PFD7 for freq we needed in u-boot - Set clock root for peripherals (ip channel) Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
2015-09-02 18:54:18 +00:00
/*
* Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* Author:
* Peng Fan <Peng.Fan@freescale.com>
*/
#include <common.h>
#include <div64.h>
#include <asm/io.h>
treewide: replace #include <asm/errno.h> with <linux/errno.h> Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-21 02:28:55 +00:00
#include <linux/errno.h>
imx: imx7d: clock control module support * Add Clock control module (CCM) support * iMX7D SoC introduces 3 main clock sysmtem abstraction for clock root frequency generation denominated clock slices. Core clock slice: hihg speed clock for ARM core Bus clock slice: for bus clocks IP clock slice: Peripheral clocks * At system boot ROM enables PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET In u-boot, we have to: - Configure PFD3- PFD7 for freq we needed in u-boot - Set clock root for peripherals (ip channel) Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
2015-09-02 18:54:18 +00:00
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
struct mxc_ccm_anatop_reg *ccm_anatop = (struct mxc_ccm_anatop_reg *)
ANATOP_BASE_ADDR;
struct mxc_ccm_reg *ccm_reg = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
#ifdef CONFIG_FSL_ESDHC
DECLARE_GLOBAL_DATA_PTR;
#endif
int get_clocks(void)
{
#ifdef CONFIG_FSL_ESDHC
#if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC2_BASE_ADDR
gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
#elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC3_BASE_ADDR
gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
#else
gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
#endif
#endif
return 0;
}
u32 get_ahb_clk(void)
{
return get_root_clk(AHB_CLK_ROOT);
}
static u32 get_ipg_clk(void)
{
/*
* The AHB and IPG are fixed at 2:1 ratio, and synchronized to
* each other.
*/
return get_ahb_clk() / 2;
}
u32 imx_get_uartclk(void)
{
return get_root_clk(UART1_CLK_ROOT);
}
u32 imx_get_fecclk(void)
{
return get_root_clk(ENET_AXI_CLK_ROOT);
}
#ifdef CONFIG_MXC_OCOTP
void enable_ocotp_clk(unsigned char enable)
{
clock_enable(CCGR_OCOTP, enable);
}
void enable_thermal_clk(void)
{
enable_ocotp_clk(1);
}
#endif
void enable_usboh3_clk(unsigned char enable)
{
u32 target;
if (enable) {
/* disable the clock gate first */
clock_enable(CCGR_USB_HSIC, 0);
/* 120Mhz */
target = CLK_ROOT_ON |
USB_HSIC_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(USB_HSIC_CLK_ROOT, target);
/* enable the clock gate */
clock_enable(CCGR_USB_CTRL, 1);
clock_enable(CCGR_USB_HSIC, 1);
clock_enable(CCGR_USB_PHY1, 1);
clock_enable(CCGR_USB_PHY2, 1);
} else {
clock_enable(CCGR_USB_CTRL, 0);
clock_enable(CCGR_USB_HSIC, 0);
clock_enable(CCGR_USB_PHY1, 0);
clock_enable(CCGR_USB_PHY2, 0);
}
}
static u32 decode_pll(enum pll_clocks pll, u32 infreq)
{
u32 reg, div_sel;
u32 num, denom;
/*
* Alought there are four choices for the bypass src,
* we choose OSC_24M which is the default set in ROM.
*/
switch (pll) {
case PLL_CORE:
reg = readl(&ccm_anatop->pll_arm);
if (reg & CCM_ANALOG_PLL_ARM_POWERDOWN_MASK)
return 0;
if (reg & CCM_ANALOG_PLL_ARM_BYPASS_MASK)
return MXC_HCLK;
div_sel = (reg & CCM_ANALOG_PLL_ARM_DIV_SELECT_MASK) >>
CCM_ANALOG_PLL_ARM_DIV_SELECT_SHIFT;
return (infreq * div_sel) / 2;
case PLL_SYS:
reg = readl(&ccm_anatop->pll_480);
if (reg & CCM_ANALOG_PLL_480_POWERDOWN_MASK)
return 0;
if (reg & CCM_ANALOG_PLL_480_BYPASS_MASK)
return MXC_HCLK;
if (((reg & CCM_ANALOG_PLL_480_DIV_SELECT_MASK) >>
CCM_ANALOG_PLL_480_DIV_SELECT_SHIFT) == 0)
return 480000000u;
else
return 528000000u;
case PLL_ENET:
reg = readl(&ccm_anatop->pll_enet);
if (reg & CCM_ANALOG_PLL_ENET_POWERDOWN_MASK)
return 0;
if (reg & CCM_ANALOG_PLL_ENET_BYPASS_MASK)
return MXC_HCLK;
return 1000000000u;
case PLL_DDR:
reg = readl(&ccm_anatop->pll_ddr);
if (reg & CCM_ANALOG_PLL_DDR_POWERDOWN_MASK)
return 0;
num = ccm_anatop->pll_ddr_num;
denom = ccm_anatop->pll_ddr_denom;
if (reg & CCM_ANALOG_PLL_DDR_BYPASS_MASK)
return MXC_HCLK;
div_sel = (reg & CCM_ANALOG_PLL_DDR_DIV_SELECT_MASK) >>
CCM_ANALOG_PLL_DDR_DIV_SELECT_SHIFT;
return infreq * (div_sel + num / denom);
case PLL_USB:
return 480000000u;
default:
printf("Unsupported pll clocks %d\n", pll);
break;
}
return 0;
}
static u32 mxc_get_pll_sys_derive(int derive)
{
u32 freq, div, frac;
u32 reg;
div = 1;
reg = readl(&ccm_anatop->pll_480);
freq = decode_pll(PLL_SYS, MXC_HCLK);
switch (derive) {
case PLL_SYS_MAIN_480M_CLK:
if (reg & CCM_ANALOG_PLL_480_MAIN_DIV1_CLKGATE_MASK)
return 0;
else
return freq;
case PLL_SYS_MAIN_240M_CLK:
if (reg & CCM_ANALOG_PLL_480_MAIN_DIV2_CLKGATE_MASK)
return 0;
else
return freq / 2;
case PLL_SYS_MAIN_120M_CLK:
if (reg & CCM_ANALOG_PLL_480_MAIN_DIV4_CLKGATE_MASK)
return 0;
else
return freq / 4;
case PLL_SYS_PFD0_392M_CLK:
reg = readl(&ccm_anatop->pfd_480a);
if (reg & CCM_ANALOG_PFD_480A_PFD0_DIV1_CLKGATE_MASK)
return 0;
frac = (reg & CCM_ANALOG_PFD_480A_PFD0_FRAC_MASK) >>
CCM_ANALOG_PFD_480A_PFD0_FRAC_SHIFT;
break;
case PLL_SYS_PFD0_196M_CLK:
if (reg & CCM_ANALOG_PLL_480_PFD0_DIV2_CLKGATE_MASK)
return 0;
reg = readl(&ccm_anatop->pfd_480a);
frac = (reg & CCM_ANALOG_PFD_480A_PFD0_FRAC_MASK) >>
CCM_ANALOG_PFD_480A_PFD0_FRAC_SHIFT;
div = 2;
break;
case PLL_SYS_PFD1_332M_CLK:
reg = readl(&ccm_anatop->pfd_480a);
if (reg & CCM_ANALOG_PFD_480A_PFD1_DIV1_CLKGATE_MASK)
return 0;
frac = (reg & CCM_ANALOG_PFD_480A_PFD1_FRAC_MASK) >>
CCM_ANALOG_PFD_480A_PFD1_FRAC_SHIFT;
break;
case PLL_SYS_PFD1_166M_CLK:
if (reg & CCM_ANALOG_PLL_480_PFD1_DIV2_CLKGATE_MASK)
return 0;
reg = readl(&ccm_anatop->pfd_480a);
frac = (reg & CCM_ANALOG_PFD_480A_PFD1_FRAC_MASK) >>
CCM_ANALOG_PFD_480A_PFD1_FRAC_SHIFT;
div = 2;
break;
case PLL_SYS_PFD2_270M_CLK:
reg = readl(&ccm_anatop->pfd_480a);
if (reg & CCM_ANALOG_PFD_480A_PFD2_DIV1_CLKGATE_MASK)
return 0;
frac = (reg & CCM_ANALOG_PFD_480A_PFD2_FRAC_MASK) >>
CCM_ANALOG_PFD_480A_PFD2_FRAC_SHIFT;
break;
case PLL_SYS_PFD2_135M_CLK:
if (reg & CCM_ANALOG_PLL_480_PFD2_DIV2_CLKGATE_MASK)
return 0;
reg = readl(&ccm_anatop->pfd_480a);
frac = (reg & CCM_ANALOG_PFD_480A_PFD2_FRAC_MASK) >>
CCM_ANALOG_PFD_480A_PFD2_FRAC_SHIFT;
div = 2;
break;
case PLL_SYS_PFD3_CLK:
reg = readl(&ccm_anatop->pfd_480a);
if (reg & CCM_ANALOG_PFD_480A_PFD3_DIV1_CLKGATE_MASK)
return 0;
frac = (reg & CCM_ANALOG_PFD_480A_PFD3_FRAC_MASK) >>
CCM_ANALOG_PFD_480A_PFD3_FRAC_SHIFT;
break;
case PLL_SYS_PFD4_CLK:
reg = readl(&ccm_anatop->pfd_480b);
if (reg & CCM_ANALOG_PFD_480B_PFD4_DIV1_CLKGATE_MASK)
return 0;
frac = (reg & CCM_ANALOG_PFD_480B_PFD4_FRAC_MASK) >>
CCM_ANALOG_PFD_480B_PFD4_FRAC_SHIFT;
break;
case PLL_SYS_PFD5_CLK:
reg = readl(&ccm_anatop->pfd_480b);
if (reg & CCM_ANALOG_PFD_480B_PFD5_DIV1_CLKGATE_MASK)
return 0;
frac = (reg & CCM_ANALOG_PFD_480B_PFD5_FRAC_MASK) >>
CCM_ANALOG_PFD_480B_PFD5_FRAC_SHIFT;
break;
case PLL_SYS_PFD6_CLK:
reg = readl(&ccm_anatop->pfd_480b);
if (reg & CCM_ANALOG_PFD_480B_PFD6_DIV1_CLKGATE_MASK)
return 0;
frac = (reg & CCM_ANALOG_PFD_480B_PFD6_FRAC_MASK) >>
CCM_ANALOG_PFD_480B_PFD6_FRAC_SHIFT;
break;
case PLL_SYS_PFD7_CLK:
reg = readl(&ccm_anatop->pfd_480b);
if (reg & CCM_ANALOG_PFD_480B_PFD7_DIV1_CLKGATE_MASK)
return 0;
frac = (reg & CCM_ANALOG_PFD_480B_PFD7_FRAC_MASK) >>
CCM_ANALOG_PFD_480B_PFD7_FRAC_SHIFT;
break;
default:
printf("Error derived pll_sys clock %d\n", derive);
return 0;
}
return ((freq / frac) * 18) / div;
}
static u32 mxc_get_pll_enet_derive(int derive)
{
u32 freq, reg;
freq = decode_pll(PLL_ENET, MXC_HCLK);
reg = readl(&ccm_anatop->pll_enet);
switch (derive) {
case PLL_ENET_MAIN_500M_CLK:
if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_500MHZ_MASK)
return freq / 2;
break;
case PLL_ENET_MAIN_250M_CLK:
if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_250MHZ_MASK)
return freq / 4;
break;
case PLL_ENET_MAIN_125M_CLK:
if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_125MHZ_MASK)
return freq / 8;
break;
case PLL_ENET_MAIN_100M_CLK:
if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_100MHZ_MASK)
return freq / 10;
break;
case PLL_ENET_MAIN_50M_CLK:
if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_50MHZ_MASK)
return freq / 20;
break;
case PLL_ENET_MAIN_40M_CLK:
if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_40MHZ_MASK)
return freq / 25;
break;
case PLL_ENET_MAIN_25M_CLK:
if (reg & CCM_ANALOG_PLL_ENET_ENABLE_CLK_25MHZ_MASK)
return freq / 40;
break;
default:
printf("Error derived pll_enet clock %d\n", derive);
break;
}
return 0;
}
static u32 mxc_get_pll_ddr_derive(int derive)
{
u32 freq, reg;
freq = decode_pll(PLL_DDR, MXC_HCLK);
reg = readl(&ccm_anatop->pll_ddr);
switch (derive) {
case PLL_DRAM_MAIN_1066M_CLK:
return freq;
case PLL_DRAM_MAIN_533M_CLK:
if (reg & CCM_ANALOG_PLL_DDR_DIV2_ENABLE_CLK_MASK)
return freq / 2;
break;
default:
printf("Error derived pll_ddr clock %d\n", derive);
break;
}
return 0;
}
static u32 mxc_get_pll_derive(enum pll_clocks pll, int derive)
{
switch (pll) {
case PLL_SYS:
return mxc_get_pll_sys_derive(derive);
case PLL_ENET:
return mxc_get_pll_enet_derive(derive);
case PLL_DDR:
return mxc_get_pll_ddr_derive(derive);
default:
printf("Error pll.\n");
return 0;
}
}
static u32 get_root_src_clk(enum clk_root_src root_src)
{
switch (root_src) {
case OSC_24M_CLK:
return 24000000u;
case PLL_ARM_MAIN_800M_CLK:
return decode_pll(PLL_CORE, MXC_HCLK);
case PLL_SYS_MAIN_480M_CLK:
case PLL_SYS_MAIN_240M_CLK:
case PLL_SYS_MAIN_120M_CLK:
case PLL_SYS_PFD0_392M_CLK:
case PLL_SYS_PFD0_196M_CLK:
case PLL_SYS_PFD1_332M_CLK:
case PLL_SYS_PFD1_166M_CLK:
case PLL_SYS_PFD2_270M_CLK:
case PLL_SYS_PFD2_135M_CLK:
case PLL_SYS_PFD3_CLK:
case PLL_SYS_PFD4_CLK:
case PLL_SYS_PFD5_CLK:
case PLL_SYS_PFD6_CLK:
case PLL_SYS_PFD7_CLK:
return mxc_get_pll_derive(PLL_SYS, root_src);
case PLL_ENET_MAIN_500M_CLK:
case PLL_ENET_MAIN_250M_CLK:
case PLL_ENET_MAIN_125M_CLK:
case PLL_ENET_MAIN_100M_CLK:
case PLL_ENET_MAIN_50M_CLK:
case PLL_ENET_MAIN_40M_CLK:
case PLL_ENET_MAIN_25M_CLK:
return mxc_get_pll_derive(PLL_ENET, root_src);
case PLL_DRAM_MAIN_1066M_CLK:
case PLL_DRAM_MAIN_533M_CLK:
return mxc_get_pll_derive(PLL_DDR, root_src);
case PLL_AUDIO_MAIN_CLK:
return decode_pll(PLL_AUDIO, MXC_HCLK);
case PLL_VIDEO_MAIN_CLK:
return decode_pll(PLL_VIDEO, MXC_HCLK);
case PLL_USB_MAIN_480M_CLK:
return decode_pll(PLL_USB, MXC_HCLK);
case REF_1M_CLK:
return 1000000;
case OSC_32K_CLK:
return MXC_CLK32;
case EXT_CLK_1:
case EXT_CLK_2:
case EXT_CLK_3:
case EXT_CLK_4:
printf("No EXT CLK supported??\n");
break;
};
return 0;
}
u32 get_root_clk(enum clk_root_index clock_id)
{
enum clk_root_src root_src;
u32 post_podf, pre_podf, auto_podf, root_src_clk;
int auto_en;
if (clock_root_enabled(clock_id) <= 0)
return 0;
if (clock_get_prediv(clock_id, &pre_podf) < 0)
return 0;
if (clock_get_postdiv(clock_id, &post_podf) < 0)
return 0;
if (clock_get_autopostdiv(clock_id, &auto_podf, &auto_en) < 0)
return 0;
if (auto_en == 0)
auto_podf = 0;
if (clock_get_src(clock_id, &root_src) < 0)
return 0;
root_src_clk = get_root_src_clk(root_src);
/*
* bypass clk is ignored.
*/
return root_src_clk / (post_podf + 1) / (pre_podf + 1) /
(auto_podf + 1);
}
static u32 get_ddrc_clk(void)
{
u32 reg, freq;
enum root_post_div post_div;
reg = readl(&ccm_reg->root[DRAM_CLK_ROOT].target_root);
if (reg & CLK_ROOT_MUX_MASK)
/* DRAM_ALT_CLK_ROOT */
freq = get_root_clk(DRAM_ALT_CLK_ROOT);
else
/* PLL_DRAM_MAIN_1066M_CLK */
freq = mxc_get_pll_derive(PLL_DDR, PLL_DRAM_MAIN_1066M_CLK);
post_div = reg & DRAM_CLK_ROOT_POST_DIV_MASK;
return freq / (post_div + 1) / 2;
}
unsigned int mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
case MXC_ARM_CLK:
return get_root_clk(ARM_A7_CLK_ROOT);
case MXC_AXI_CLK:
return get_root_clk(MAIN_AXI_CLK_ROOT);
case MXC_AHB_CLK:
return get_root_clk(AHB_CLK_ROOT);
case MXC_IPG_CLK:
return get_ipg_clk();
case MXC_I2C_CLK:
return get_root_clk(I2C1_CLK_ROOT);
case MXC_UART_CLK:
return get_root_clk(UART1_CLK_ROOT);
case MXC_CSPI_CLK:
return get_root_clk(ECSPI1_CLK_ROOT);
case MXC_DDR_CLK:
return get_ddrc_clk();
case MXC_ESDHC_CLK:
return get_root_clk(USDHC1_CLK_ROOT);
case MXC_ESDHC2_CLK:
return get_root_clk(USDHC2_CLK_ROOT);
case MXC_ESDHC3_CLK:
return get_root_clk(USDHC3_CLK_ROOT);
default:
printf("Unsupported mxc_clock %d\n", clk);
break;
}
return 0;
}
#ifdef CONFIG_SYS_I2C_MXC
/* i2c_num can be 0 - 3 */
int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
{
u32 target;
if (i2c_num >= 4)
return -EINVAL;
if (enable) {
clock_enable(CCGR_I2C1 + i2c_num, 0);
/* Set i2c root clock to PLL_SYS_MAIN_120M_CLK */
target = CLK_ROOT_ON |
I2C1_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
clock_set_target_val(I2C1_CLK_ROOT + i2c_num, target);
clock_enable(CCGR_I2C1 + i2c_num, 1);
} else {
clock_enable(CCGR_I2C1 + i2c_num, 0);
}
return 0;
}
#endif
static void init_clk_esdhc(void)
{
u32 target;
/* disable the clock gate first */
clock_enable(CCGR_USDHC1, 0);
clock_enable(CCGR_USDHC2, 0);
clock_enable(CCGR_USDHC3, 0);
/* 196: 392/2 */
target = CLK_ROOT_ON | USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
clock_set_target_val(USDHC1_CLK_ROOT, target);
target = CLK_ROOT_ON | USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
clock_set_target_val(USDHC2_CLK_ROOT, target);
target = CLK_ROOT_ON | USDHC1_CLK_ROOT_FROM_PLL_SYS_PFD0_392M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
clock_set_target_val(USDHC3_CLK_ROOT, target);
/* enable the clock gate */
clock_enable(CCGR_USDHC1, 1);
clock_enable(CCGR_USDHC2, 1);
clock_enable(CCGR_USDHC3, 1);
}
static void init_clk_uart(void)
{
u32 target;
/* disable the clock gate first */
clock_enable(CCGR_UART1, 0);
clock_enable(CCGR_UART2, 0);
clock_enable(CCGR_UART3, 0);
clock_enable(CCGR_UART4, 0);
clock_enable(CCGR_UART5, 0);
clock_enable(CCGR_UART6, 0);
clock_enable(CCGR_UART7, 0);
/* 24Mhz */
target = CLK_ROOT_ON | UART1_CLK_ROOT_FROM_OSC_24M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(UART1_CLK_ROOT, target);
target = CLK_ROOT_ON | UART2_CLK_ROOT_FROM_OSC_24M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(UART2_CLK_ROOT, target);
target = CLK_ROOT_ON | UART3_CLK_ROOT_FROM_OSC_24M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(UART3_CLK_ROOT, target);
target = CLK_ROOT_ON | UART4_CLK_ROOT_FROM_OSC_24M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(UART4_CLK_ROOT, target);
target = CLK_ROOT_ON | UART5_CLK_ROOT_FROM_OSC_24M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(UART5_CLK_ROOT, target);
target = CLK_ROOT_ON | UART6_CLK_ROOT_FROM_OSC_24M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(UART6_CLK_ROOT, target);
target = CLK_ROOT_ON | UART7_CLK_ROOT_FROM_OSC_24M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(UART7_CLK_ROOT, target);
/* enable the clock gate */
clock_enable(CCGR_UART1, 1);
clock_enable(CCGR_UART2, 1);
clock_enable(CCGR_UART3, 1);
clock_enable(CCGR_UART4, 1);
clock_enable(CCGR_UART5, 1);
clock_enable(CCGR_UART6, 1);
clock_enable(CCGR_UART7, 1);
}
static void init_clk_weim(void)
{
u32 target;
/* disable the clock gate first */
clock_enable(CCGR_WEIM, 0);
/* 120Mhz */
target = CLK_ROOT_ON | EIM_CLK_ROOT_FROM_PLL_SYS_MAIN_120M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(EIM_CLK_ROOT, target);
/* enable the clock gate */
clock_enable(CCGR_WEIM, 1);
}
static void init_clk_ecspi(void)
{
u32 target;
/* disable the clock gate first */
clock_enable(CCGR_ECSPI1, 0);
clock_enable(CCGR_ECSPI2, 0);
clock_enable(CCGR_ECSPI3, 0);
clock_enable(CCGR_ECSPI4, 0);
/* 60Mhz: 240/4 */
target = CLK_ROOT_ON | ECSPI1_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
clock_set_target_val(ECSPI1_CLK_ROOT, target);
target = CLK_ROOT_ON | ECSPI2_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
clock_set_target_val(ECSPI2_CLK_ROOT, target);
target = CLK_ROOT_ON | ECSPI3_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
clock_set_target_val(ECSPI3_CLK_ROOT, target);
target = CLK_ROOT_ON | ECSPI4_CLK_ROOT_FROM_PLL_SYS_MAIN_240M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
clock_set_target_val(ECSPI4_CLK_ROOT, target);
/* enable the clock gate */
clock_enable(CCGR_ECSPI1, 1);
clock_enable(CCGR_ECSPI2, 1);
clock_enable(CCGR_ECSPI3, 1);
clock_enable(CCGR_ECSPI4, 1);
}
static void init_clk_wdog(void)
{
u32 target;
/* disable the clock gate first */
clock_enable(CCGR_WDOG1, 0);
clock_enable(CCGR_WDOG2, 0);
clock_enable(CCGR_WDOG3, 0);
clock_enable(CCGR_WDOG4, 0);
/* 24Mhz */
target = CLK_ROOT_ON | WDOG_CLK_ROOT_FROM_OSC_24M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(WDOG_CLK_ROOT, target);
/* enable the clock gate */
clock_enable(CCGR_WDOG1, 1);
clock_enable(CCGR_WDOG2, 1);
clock_enable(CCGR_WDOG3, 1);
clock_enable(CCGR_WDOG4, 1);
}
#ifdef CONFIG_MXC_EPDC
static void init_clk_epdc(void)
{
u32 target;
/* disable the clock gate first */
clock_enable(CCGR_EPDC, 0);
/* 24Mhz */
target = CLK_ROOT_ON | EPDC_PIXEL_CLK_ROOT_FROM_PLL_SYS_MAIN_480M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV12);
clock_set_target_val(EPDC_PIXEL_CLK_ROOT, target);
/* enable the clock gate */
clock_enable(CCGR_EPDC, 1);
}
#endif
static int enable_pll_enet(void)
{
u32 reg;
s32 timeout = 100000;
reg = readl(&ccm_anatop->pll_enet);
/* If pll_enet powered up, no need to set it again */
if (reg & ANADIG_PLL_ENET_PWDN_MASK) {
reg &= ~ANADIG_PLL_ENET_PWDN_MASK;
writel(reg, &ccm_anatop->pll_enet);
while (timeout--) {
if (readl(&ccm_anatop->pll_enet) & ANADIG_PLL_LOCK)
break;
}
if (timeout <= 0) {
/* If timeout, we set pwdn for pll_enet. */
reg |= ANADIG_PLL_ENET_PWDN_MASK;
return -ETIME;
}
}
/* Clear bypass */
writel(CCM_ANALOG_PLL_ENET_BYPASS_MASK, &ccm_anatop->pll_enet_clr);
writel((CCM_ANALOG_PLL_ENET_ENABLE_CLK_500MHZ_MASK
| CCM_ANALOG_PLL_ENET_ENABLE_CLK_250MHZ_MASK
| CCM_ANALOG_PLL_ENET_ENABLE_CLK_125MHZ_MASK
| CCM_ANALOG_PLL_ENET_ENABLE_CLK_100MHZ_MASK
| CCM_ANALOG_PLL_ENET_ENABLE_CLK_50MHZ_MASK
| CCM_ANALOG_PLL_ENET_ENABLE_CLK_40MHZ_MASK
| CCM_ANALOG_PLL_ENET_ENABLE_CLK_25MHZ_MASK),
&ccm_anatop->pll_enet_set);
return 0;
}
static int enable_pll_video(u32 pll_div, u32 pll_num, u32 pll_denom,
u32 post_div)
{
u32 reg = 0;
ulong start;
debug("pll5 div = %d, num = %d, denom = %d\n",
pll_div, pll_num, pll_denom);
/* Power up PLL5 video and disable its output */
writel(CCM_ANALOG_PLL_VIDEO_CLR_ENABLE_CLK_MASK |
CCM_ANALOG_PLL_VIDEO_CLR_POWERDOWN_MASK |
CCM_ANALOG_PLL_VIDEO_CLR_BYPASS_MASK |
CCM_ANALOG_PLL_VIDEO_CLR_DIV_SELECT_MASK |
CCM_ANALOG_PLL_VIDEO_CLR_POST_DIV_SEL_MASK |
CCM_ANALOG_PLL_VIDEO_CLR_TEST_DIV_SELECT_MASK,
&ccm_anatop->pll_video_clr);
/* Set div, num and denom */
switch (post_div) {
case 1:
writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) |
CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x1) |
CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x0),
&ccm_anatop->pll_video_set);
break;
case 2:
writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) |
CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x0) |
CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x0),
&ccm_anatop->pll_video_set);
break;
case 3:
writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) |
CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x0) |
CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x1),
&ccm_anatop->pll_video_set);
break;
case 4:
writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) |
CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x0) |
CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x3),
&ccm_anatop->pll_video_set);
break;
case 0:
default:
writel(CCM_ANALOG_PLL_VIDEO_SET_DIV_SELECT(pll_div) |
CCM_ANALOG_PLL_VIDEO_SET_TEST_DIV_SELECT(0x2) |
CCM_ANALOG_PLL_VIDEO_SET_POST_DIV_SEL(0x0),
&ccm_anatop->pll_video_set);
break;
}
writel(CCM_ANALOG_PLL_VIDEO_NUM_A(pll_num),
&ccm_anatop->pll_video_num);
writel(CCM_ANALOG_PLL_VIDEO_DENOM_B(pll_denom),
&ccm_anatop->pll_video_denom);
/* Wait PLL5 lock */
start = get_timer(0); /* Get current timestamp */
do {
reg = readl(&ccm_anatop->pll_video);
if (reg & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) {
/* Enable PLL out */
writel(CCM_ANALOG_PLL_VIDEO_CLR_ENABLE_CLK_MASK,
&ccm_anatop->pll_video_set);
return 0;
}
} while (get_timer(0) < (start + 10)); /* Wait 10ms */
printf("Lock PLL5 timeout\n");
return 1;
}
int set_clk_qspi(void)
{
u32 target;
/* disable the clock gate first */
clock_enable(CCGR_QSPI, 0);
/* 49M: 392/2/4 */
target = CLK_ROOT_ON | QSPI_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
clock_set_target_val(QSPI_CLK_ROOT, target);
/* enable the clock gate */
clock_enable(CCGR_QSPI, 1);
return 0;
}
int set_clk_nand(void)
{
u32 target;
/* disable the clock gate first */
clock_enable(CCGR_RAWNAND, 0);
enable_pll_enet();
/* 100: 500/5 */
target = CLK_ROOT_ON | NAND_CLK_ROOT_FROM_PLL_ENET_MAIN_500M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV5);
clock_set_target_val(NAND_CLK_ROOT, target);
/* enable the clock gate */
clock_enable(CCGR_RAWNAND, 1);
return 0;
}
void mxs_set_lcdclk(uint32_t base_addr, uint32_t freq)
{
u32 hck = MXC_HCLK/1000;
u32 min = hck * 27;
u32 max = hck * 54;
u32 temp, best = 0;
u32 i, j, pred = 1, postd = 1;
u32 pll_div, pll_num, pll_denom, post_div = 0;
u32 target;
debug("mxs_set_lcdclk, freq = %d\n", freq);
clock_enable(CCGR_LCDIF, 0);
temp = (freq * 8 * 8);
if (temp < min) {
for (i = 1; i <= 4; i++) {
if ((temp * (1 << i)) > min) {
post_div = i;
freq = (freq * (1 << i));
break;
}
}
if (5 == i) {
printf("Fail to set rate to %dkhz", freq);
return;
}
}
for (i = 1; i <= 8; i++) {
for (j = 1; j <= 8; j++) {
temp = freq * i * j;
if (temp > max || temp < min)
continue;
if (best == 0 || temp < best) {
best = temp;
pred = i;
postd = j;
}
}
}
if (best == 0) {
printf("Fail to set rate to %dkhz", freq);
return;
}
debug("best %d, pred = %d, postd = %d\n", best, pred, postd);
pll_div = best / hck;
pll_denom = 1000000;
pll_num = (best - hck * pll_div) * pll_denom / hck;
if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
return;
target = CLK_ROOT_ON | LCDIF_PIXEL_CLK_ROOT_FROM_PLL_VIDEO_MAIN_CLK |
CLK_ROOT_PRE_DIV((pred - 1)) | CLK_ROOT_POST_DIV((postd - 1));
clock_set_target_val(LCDIF_PIXEL_CLK_ROOT, target);
clock_enable(CCGR_LCDIF, 1);
}
#ifdef CONFIG_FEC_MXC
int set_clk_enet(enum enet_freq type)
{
u32 target;
int ret;
u32 enet1_ref, enet2_ref;
/* disable the clock first */
clock_enable(CCGR_ENET1, 0);
clock_enable(CCGR_ENET2, 0);
switch (type) {
imx: imx7d: remove CamelCase from ENET_xMHz macros Update these macros to use all upper-case to avoid checkpatch warnings: ENET_25MHz, ENET_50MHz, ENET_125MHz, Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-31 15:34:23 +00:00
case ENET_125MHZ:
imx: imx7d: clock control module support * Add Clock control module (CCM) support * iMX7D SoC introduces 3 main clock sysmtem abstraction for clock root frequency generation denominated clock slices. Core clock slice: hihg speed clock for ARM core Bus clock slice: for bus clocks IP clock slice: Peripheral clocks * At system boot ROM enables PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET In u-boot, we have to: - Configure PFD3- PFD7 for freq we needed in u-boot - Set clock root for peripherals (ip channel) Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
2015-09-02 18:54:18 +00:00
enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_125M_CLK;
break;
imx: imx7d: remove CamelCase from ENET_xMHz macros Update these macros to use all upper-case to avoid checkpatch warnings: ENET_25MHz, ENET_50MHz, ENET_125MHz, Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-31 15:34:23 +00:00
case ENET_50MHZ:
imx: imx7d: clock control module support * Add Clock control module (CCM) support * iMX7D SoC introduces 3 main clock sysmtem abstraction for clock root frequency generation denominated clock slices. Core clock slice: hihg speed clock for ARM core Bus clock slice: for bus clocks IP clock slice: Peripheral clocks * At system boot ROM enables PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET In u-boot, we have to: - Configure PFD3- PFD7 for freq we needed in u-boot - Set clock root for peripherals (ip channel) Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
2015-09-02 18:54:18 +00:00
enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_50M_CLK;
break;
imx: imx7d: remove CamelCase from ENET_xMHz macros Update these macros to use all upper-case to avoid checkpatch warnings: ENET_25MHz, ENET_50MHz, ENET_125MHz, Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-08-31 15:34:23 +00:00
case ENET_25MHZ:
imx: imx7d: clock control module support * Add Clock control module (CCM) support * iMX7D SoC introduces 3 main clock sysmtem abstraction for clock root frequency generation denominated clock slices. Core clock slice: hihg speed clock for ARM core Bus clock slice: for bus clocks IP clock slice: Peripheral clocks * At system boot ROM enables PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET In u-boot, we have to: - Configure PFD3- PFD7 for freq we needed in u-boot - Set clock root for peripherals (ip channel) Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
2015-09-02 18:54:18 +00:00
enet1_ref = ENET1_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
enet2_ref = ENET2_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK;
break;
default:
return -EINVAL;
}
ret = enable_pll_enet();
if (ret != 0)
return ret;
/* set enet axi clock 196M: 392/2 */
target = CLK_ROOT_ON | ENET_AXI_CLK_ROOT_FROM_PLL_SYS_PFD4_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV2);
clock_set_target_val(ENET_AXI_CLK_ROOT, target);
target = CLK_ROOT_ON | enet1_ref |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(ENET1_REF_CLK_ROOT, target);
target = CLK_ROOT_ON | ENET1_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
clock_set_target_val(ENET1_TIME_CLK_ROOT, target);
target = CLK_ROOT_ON | enet2_ref |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(ENET2_REF_CLK_ROOT, target);
target = CLK_ROOT_ON | ENET2_TIME_CLK_ROOT_FROM_PLL_ENET_MAIN_100M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV4);
clock_set_target_val(ENET2_TIME_CLK_ROOT, target);
#ifdef CONFIG_FEC_MXC_25M_REF_CLK
target = CLK_ROOT_ON |
ENET_PHY_REF_CLK_ROOT_FROM_PLL_ENET_MAIN_25M_CLK |
CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(CLK_ROOT_POST_DIV1);
clock_set_target_val(ENET_PHY_REF_CLK_ROOT, target);
#endif
/* enable clock */
clock_enable(CCGR_ENET1, 1);
clock_enable(CCGR_ENET2, 1);
return 0;
}
#endif
/* Configure PLL/PFD freq */
void clock_init(void)
{
/* Rom has enabled PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET
* In u-boot, we have to:
* 1. Configure PFD3- PFD7 for freq we needed in u-boot
* 2. Set clock root for peripherals (ip channel) used in u-boot but without set rate
* interface. The clocks for these peripherals are enabled after this intialization.
* 3. Other peripherals with set clock rate interface does not be set in this function.
*/
u32 reg;
/*
* Configure PFD4 to 392M
* 480M * 18 / 0x16 = 392M
*/
reg = readl(&ccm_anatop->pfd_480b);
reg &= ~(ANATOP_PFD480B_PFD4_FRAC_MASK |
CCM_ANALOG_PFD_480B_PFD4_DIV1_CLKGATE_MASK);
reg |= ANATOP_PFD480B_PFD4_FRAC_392M_VAL;
writel(reg, &ccm_anatop->pfd_480b);
init_clk_esdhc();
init_clk_uart();
init_clk_weim();
init_clk_ecspi();
init_clk_wdog();
#ifdef CONFIG_MXC_EPDC
init_clk_epdc();
#endif
enable_usboh3_clk(1);
clock_enable(CCGR_SNVS, 1);
#ifdef CONFIG_NAND_MXS
clock_enable(CCGR_RAWNAND, 1);
#endif
imx: mx7d: clock support for RDC If CONFIG_IMX_RDC is enabled, enable clock for RDC and SEMAPHORE. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2016-01-28 08:55:03 +00:00
if (IS_ENABLED(CONFIG_IMX_RDC)) {
clock_enable(CCGR_RDC, 1);
clock_enable(CCGR_SEMA1, 1);
clock_enable(CCGR_SEMA2, 1);
}
imx: imx7d: clock control module support * Add Clock control module (CCM) support * iMX7D SoC introduces 3 main clock sysmtem abstraction for clock root frequency generation denominated clock slices. Core clock slice: hihg speed clock for ARM core Bus clock slice: for bus clocks IP clock slice: Peripheral clocks * At system boot ROM enables PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET In u-boot, we have to: - Configure PFD3- PFD7 for freq we needed in u-boot - Set clock root for peripherals (ip channel) Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
2015-09-02 18:54:18 +00:00
}
#ifdef CONFIG_SECURE_BOOT
void hab_caam_clock_enable(unsigned char enable)
{
if (enable)
clock_enable(CCGR_CAAM, 1);
else
clock_enable(CCGR_CAAM, 0);
}
#endif
#ifdef CONFIG_MXC_EPDC
void epdc_clock_enable(void)
{
clock_enable(CCGR_EPDC, 1);
}
void epdc_clock_disable(void)
{
clock_enable(CCGR_EPDC, 0);
}
#endif
arm: imx: Rework i.MX specific commands to be excluded from SPL The "clocks" and "bootaux" commands are only usable in full U-Boot, not SPL, so do not link them inside of SPL. Rework a little of the bootaux related code to make use of __weak and declare parts of it static as it's local to the file. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-03 13:52:39 +00:00
#ifndef CONFIG_SPL_BUILD
imx: imx7d: clock control module support * Add Clock control module (CCM) support * iMX7D SoC introduces 3 main clock sysmtem abstraction for clock root frequency generation denominated clock slices. Core clock slice: hihg speed clock for ARM core Bus clock slice: for bus clocks IP clock slice: Peripheral clocks * At system boot ROM enables PLL_ARM, PLL_DDR, PLL_SYS, PLL_ENET In u-boot, we have to: - Configure PFD3- PFD7 for freq we needed in u-boot - Set clock root for peripherals (ip channel) Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
2015-09-02 18:54:18 +00:00
/*
* Dump some core clockes.
*/
int do_mx7_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u32 freq;
freq = decode_pll(PLL_CORE, MXC_HCLK);
printf("PLL_CORE %8d MHz\n", freq / 1000000);
freq = decode_pll(PLL_SYS, MXC_HCLK);
printf("PLL_SYS %8d MHz\n", freq / 1000000);
freq = decode_pll(PLL_ENET, MXC_HCLK);
printf("PLL_NET %8d MHz\n", freq / 1000000);
printf("\n");
printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000);
#ifdef CONFIG_MXC_SPI
printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000);
#endif
printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000);
printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000);
printf("USDHC1 %8d kHz\n", mxc_get_clock(MXC_ESDHC_CLK) / 1000);
printf("USDHC2 %8d kHz\n", mxc_get_clock(MXC_ESDHC2_CLK) / 1000);
printf("USDHC3 %8d kHz\n", mxc_get_clock(MXC_ESDHC3_CLK) / 1000);
return 0;
}
U_BOOT_CMD(
clocks, CONFIG_SYS_MAXARGS, 1, do_mx7_showclocks,
"display clocks",
""
);
arm: imx: Rework i.MX specific commands to be excluded from SPL The "clocks" and "bootaux" commands are only usable in full U-Boot, not SPL, so do not link them inside of SPL. Rework a little of the bootaux related code to make use of __weak and declare parts of it static as it's local to the file. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-03 13:52:39 +00:00
#endif
Reference in a new issue Copy permalink