mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
361 lines
8.5 KiB
Text
361 lines
8.5 KiB
Text
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
|
/*
|
||
|
|
* Copyright 2019 NXP
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <dt-bindings/usb/pd.h>
|
||
|
|
#include "imx8mn.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
chosen {
|
||
|
|
stdout-path = &uart2;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio-leds {
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_gpio_led>;
|
||
|
|
|
||
|
|
status {
|
||
|
|
label = "yellow:status";
|
||
|
|
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
|
||
|
|
default-state = "on";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
memory@40000000 {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x0 0x40000000 0 0x80000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_usdhc2_vmmc: regulator-usdhc2 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
|
||
|
|
regulator-name = "VSD_3V3";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
ir-receiver {
|
||
|
|
compatible = "gpio-ir-receiver";
|
||
|
|
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_ir>;
|
||
|
|
linux,autosuspend-period = <125>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&fec1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_fec1>;
|
||
|
|
phy-mode = "rgmii-id";
|
||
|
|
phy-handle = <ðphy0>;
|
||
|
|
fsl,magic-packet;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
mdio {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
ethphy0: ethernet-phy@0 {
|
||
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||
|
|
reg = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c2 {
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
ptn5110: tcpc@50 {
|
||
|
|
compatible = "nxp,ptn5110";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_typec1>;
|
||
|
|
reg = <0x50>;
|
||
|
|
interrupt-parent = <&gpio2>;
|
||
|
|
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
port {
|
||
|
|
typec1_dr_sw: endpoint {
|
||
|
|
remote-endpoint = <&usb1_drd_sw>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
typec1_con: connector {
|
||
|
|
compatible = "usb-c-connector";
|
||
|
|
label = "USB-C";
|
||
|
|
power-role = "dual";
|
||
|
|
data-role = "dual";
|
||
|
|
try-power-role = "sink";
|
||
|
|
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||
|
|
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
||
|
|
PDO_VAR(5000, 20000, 3000)>;
|
||
|
|
op-sink-microwatt = <15000000>;
|
||
|
|
self-powered;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c3 {
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
pca6416: gpio@20 {
|
||
|
|
compatible = "ti,tca6416";
|
||
|
|
reg = <0x20>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&snvs_pwrkey {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart2 { /* console */
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbotg1 {
|
||
|
|
dr_mode = "otg";
|
||
|
|
hnp-disable;
|
||
|
|
srp-disable;
|
||
|
|
adp-disable;
|
||
|
|
usb-role-switch;
|
||
|
|
samsung,picophy-pre-emp-curr-control = <3>;
|
||
|
|
samsung,picophy-dc-vol-level-adjust = <7>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
port {
|
||
|
|
usb1_drd_sw: endpoint {
|
||
|
|
remote-endpoint = <&typec1_dr_sw>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&usdhc2 {
|
||
|
|
assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
|
||
|
|
assigned-clock-rates = <200000000>;
|
||
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
||
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
||
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
||
|
|
cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||
|
|
bus-width = <4>;
|
||
|
|
vmmc-supply = <®_usdhc2_vmmc>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usdhc3 {
|
||
|
|
assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
|
||
|
|
assigned-clock-rates = <400000000>;
|
||
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
||
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
||
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
||
|
|
bus-width = <8>;
|
||
|
|
non-removable;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&wdog1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
||
|
|
fsl,ext-reset-output;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&iomuxc {
|
||
|
|
pinctrl_fec1: fec1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
|
||
|
|
MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
|
||
|
|
MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
|
||
|
|
MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
|
||
|
|
MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
|
||
|
|
MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
|
||
|
|
MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
|
||
|
|
MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
|
||
|
|
MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
|
||
|
|
MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
|
||
|
|
MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
|
||
|
|
MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
|
||
|
|
MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
|
||
|
|
MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
|
||
|
|
MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_gpio_led: gpioledgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_ir: irgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c1: i2c1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
|
||
|
|
MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c2: i2c2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
|
||
|
|
MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c3: i2c3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
|
||
|
|
MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pmic: pmicirqgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_typec1: typec1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart2: uart2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
|
||
|
|
MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc2: usdhc2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
|
||
|
|
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
|
||
|
|
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
|
||
|
|
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
|
||
|
|
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
|
||
|
|
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
|
||
|
|
MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
|
||
|
|
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
|
||
|
|
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
|
||
|
|
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
|
||
|
|
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
|
||
|
|
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
|
||
|
|
MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
|
||
|
|
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
|
||
|
|
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
|
||
|
|
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
|
||
|
|
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
|
||
|
|
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
|
||
|
|
MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3: usdhc3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190
|
||
|
|
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
|
||
|
|
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
|
||
|
|
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
|
||
|
|
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
|
||
|
|
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
|
||
|
|
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
|
||
|
|
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
|
||
|
|
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
|
||
|
|
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
|
||
|
|
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194
|
||
|
|
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
|
||
|
|
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
|
||
|
|
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
|
||
|
|
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
|
||
|
|
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
|
||
|
|
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
|
||
|
|
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
|
||
|
|
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
|
||
|
|
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
|
||
|
|
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196
|
||
|
|
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
|
||
|
|
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
|
||
|
|
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
|
||
|
|
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
|
||
|
|
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
|
||
|
|
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
|
||
|
|
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
|
||
|
|
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
|
||
|
|
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
|
||
|
|
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_wdog: wdoggrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|