2018-05-06 21:58:06 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
ARM: tegra: add p2771-0000 board support
P2771-0000 is a P3310 CPU board married to a P2597 I/O board. The
combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B
port, Ethernet, USB3 host port, SATA, PCIe, and two GPIO expansion
headers.
Currently, due to U-Boot's level of support for Tegra186, the only
features supported by U-Boot are the console UART and the on-board eMMC.
Additional features will be added over time.
U-Boot has so far been tested by replacing the kernel image on the device
with a U-Boot binary. It is anticipated that U-Boot will eventually
replace the CCPLEX bootloader binary, as on previous chips. This hasn't
yet been tested.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-05-12 19:32:56 +00:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2016, NVIDIA CORPORATION
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <common.h>
|
2019-08-01 15:46:52 +00:00
|
|
|
#include <env.h>
|
2019-04-15 09:32:36 +00:00
|
|
|
#include <fdtdec.h>
|
2016-07-29 19:15:05 +00:00
|
|
|
#include <i2c.h>
|
2020-05-10 17:40:05 +00:00
|
|
|
#include <log.h>
|
2020-05-10 17:39:56 +00:00
|
|
|
#include <net.h>
|
2019-04-15 09:32:34 +00:00
|
|
|
#include <linux/libfdt.h>
|
|
|
|
#include <asm/arch-tegra/cboot.h>
|
2016-07-29 19:15:05 +00:00
|
|
|
#include "../p2571/max77620_init.h"
|
|
|
|
|
2019-04-15 09:32:28 +00:00
|
|
|
void pin_mux_mmc(void)
|
2016-07-29 19:15:05 +00:00
|
|
|
{
|
|
|
|
struct udevice *dev;
|
|
|
|
uchar val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Turn on MAX77620 LDO3 to 3.3V for SD card power */
|
|
|
|
debug("%s: Set LDO3 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
|
|
|
|
ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
|
|
|
|
if (ret) {
|
|
|
|
printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
|
2019-04-15 09:32:28 +00:00
|
|
|
return;
|
2016-07-29 19:15:05 +00:00
|
|
|
}
|
|
|
|
/* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
|
|
|
|
val = 0xF2;
|
|
|
|
ret = dm_i2c_write(dev, MAX77620_CNFG1_L3_REG, &val, 1);
|
|
|
|
if (ret) {
|
|
|
|
printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
|
2019-04-15 09:32:28 +00:00
|
|
|
return;
|
2016-07-29 19:15:05 +00:00
|
|
|
}
|
|
|
|
}
|
2016-07-29 19:15:06 +00:00
|
|
|
|
2019-04-15 09:32:28 +00:00
|
|
|
#ifdef CONFIG_PCI_TEGRA
|
2016-07-29 19:15:06 +00:00
|
|
|
int tegra_pcie_board_init(void)
|
|
|
|
{
|
|
|
|
struct udevice *dev;
|
|
|
|
uchar val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Turn on MAX77620 LDO7 to 1.05V for PEX power */
|
|
|
|
debug("%s: Set LDO7 for PEX power to 1.05V\n", __func__);
|
|
|
|
ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
|
|
|
|
if (ret) {
|
|
|
|
printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
/* 0xC5 for 1.05v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
|
|
|
|
val = 0xC5;
|
|
|
|
ret = dm_i2c_write(dev, MAX77620_CNFG1_L7_REG, &val, 1);
|
|
|
|
if (ret)
|
|
|
|
printf("i2c_write 0 0x3c 0x31 failed: %d\n", ret);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2019-04-15 09:32:28 +00:00
|
|
|
#endif
|
2019-04-15 09:32:34 +00:00
|
|
|
|
2019-04-15 09:32:36 +00:00
|
|
|
static void ft_mac_address_setup(void *fdt)
|
2019-04-15 09:32:34 +00:00
|
|
|
{
|
|
|
|
const void *cboot_fdt = (const void *)cboot_boot_x0;
|
|
|
|
uint8_t mac[ETH_ALEN], local_mac[ETH_ALEN];
|
|
|
|
const char *path;
|
|
|
|
int offset, err;
|
|
|
|
|
|
|
|
err = cboot_get_ethaddr(cboot_fdt, local_mac);
|
|
|
|
if (err < 0)
|
|
|
|
memset(local_mac, 0, ETH_ALEN);
|
|
|
|
|
|
|
|
path = fdt_get_alias(fdt, "ethernet");
|
|
|
|
if (!path)
|
2019-04-15 09:32:36 +00:00
|
|
|
return;
|
2019-04-15 09:32:34 +00:00
|
|
|
|
|
|
|
debug("ethernet alias found: %s\n", path);
|
|
|
|
|
|
|
|
offset = fdt_path_offset(fdt, path);
|
2019-04-15 09:32:36 +00:00
|
|
|
if (offset < 0) {
|
|
|
|
printf("ethernet alias points to absent node %s\n", path);
|
|
|
|
return;
|
|
|
|
}
|
2019-04-15 09:32:34 +00:00
|
|
|
|
|
|
|
if (is_valid_ethaddr(local_mac)) {
|
|
|
|
err = fdt_setprop(fdt, offset, "local-mac-address", local_mac,
|
|
|
|
ETH_ALEN);
|
|
|
|
if (!err)
|
|
|
|
debug("Local MAC address set: %pM\n", local_mac);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (eth_env_get_enetaddr("ethaddr", mac)) {
|
|
|
|
if (memcmp(local_mac, mac, ETH_ALEN) != 0) {
|
|
|
|
err = fdt_setprop(fdt, offset, "mac-address", mac,
|
|
|
|
ETH_ALEN);
|
|
|
|
if (!err)
|
|
|
|
debug("MAC address set: %pM\n", mac);
|
|
|
|
}
|
|
|
|
}
|
2019-04-15 09:32:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int ft_copy_carveout(void *dst, const void *src, const char *node)
|
|
|
|
{
|
|
|
|
struct fdt_memory fb;
|
|
|
|
int err;
|
|
|
|
|
2021-09-03 13:16:19 +00:00
|
|
|
err = fdtdec_get_carveout(src, node, "memory-region", 0, &fb, NULL,
|
2021-09-03 13:16:21 +00:00
|
|
|
NULL, NULL, NULL);
|
2019-04-15 09:32:36 +00:00
|
|
|
if (err < 0) {
|
|
|
|
if (err != -FDT_ERR_NOTFOUND)
|
|
|
|
printf("failed to get carveout for %s: %d\n", node,
|
|
|
|
err);
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2021-09-03 13:16:20 +00:00
|
|
|
err = fdtdec_set_carveout(dst, node, "memory-region", 0, &fb,
|
2021-09-03 13:16:21 +00:00
|
|
|
"framebuffer", NULL, 0, 0);
|
2019-04-15 09:32:36 +00:00
|
|
|
if (err < 0) {
|
|
|
|
printf("failed to set carveout for %s: %d\n", node, err);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ft_carveout_setup(void *fdt)
|
|
|
|
{
|
|
|
|
const void *cboot_fdt = (const void *)cboot_boot_x0;
|
|
|
|
static const char * const nodes[] = {
|
|
|
|
"/host1x@13e00000/display-hub@15200000/display@15200000",
|
|
|
|
"/host1x@13e00000/display-hub@15200000/display@15210000",
|
|
|
|
"/host1x@13e00000/display-hub@15200000/display@15220000",
|
|
|
|
};
|
|
|
|
unsigned int i;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(nodes); i++) {
|
|
|
|
printf("copying carveout for %s...\n", nodes[i]);
|
|
|
|
|
|
|
|
err = ft_copy_carveout(fdt, cboot_fdt, nodes[i]);
|
|
|
|
if (err < 0) {
|
|
|
|
if (err != -FDT_ERR_NOTFOUND)
|
|
|
|
printf("failed to copy carveout for %s: %d\n",
|
|
|
|
nodes[i], err);
|
|
|
|
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-06-26 06:13:33 +00:00
|
|
|
int ft_board_setup(void *fdt, struct bd_info *bd)
|
2019-04-15 09:32:36 +00:00
|
|
|
{
|
|
|
|
ft_mac_address_setup(fdt);
|
|
|
|
ft_carveout_setup(fdt);
|
2019-04-15 09:32:34 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|