Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-14 00:47:26 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/stm32mp15_basic_defconfig

67 lines
1.6 KiB
Text
Raw Normal View History

board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_ARM=y
CONFIG_ARCH_STM32MP=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL=y
CONFIG_TARGET_STM32MP1=y
CONFIG_DISTRO_DEFAULTS=y
configs: Migrate CONFIG_NR_DRAM_BANKS We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 12:16:24 +00:00
CONFIG_NR_DRAM_BANKS=1
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_POWER_SUPPORT=y
CONFIG_SYS_PROMPT="STM32MP> "
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
CONFIG_CMD_MEMINFO=y
configs: stm32mp15: enable ADC Enable ADC on stm32mp15. - CONFIG_CMD_ADC - CONFIG_STM32_ADC Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-24 14:31:32 +00:00
CONFIG_CMD_ADC=y
stm32mp1: add FUSE command support Add support of fuse command (read/write/program/sense) on bank 0 to access to BSEC SAFMEM (4096 OTP bits). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-17 13:24:06 +00:00
CONFIG_CMD_FUSE=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_CMD_GPIO=y
stm32mp1: add eMMC support for ED1 Add command GPT support Add EMMC boot support Add the 2 other SDMMC instances for ED1: - SDMMC2 = mmc 1, eMMC on the ED1 board - SDMMC3 = extension connector, deactivated by default Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-20 09:54:52 +00:00
CONFIG_CMD_GPT=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
configs: stm32mp15: Enable USB relative flags Enable config USB relative flags in order to enable USB EHCI, DWC2 gadget, download and mass_storage support. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-10 15:12:13 +00:00
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_CMD_PMIC=y
configs: stm32mp15_basic: Set regulator relative flags Enable DM_REGULATOR_STPMU1 flag to activate regulator driver for STM32MP15 SoC and CMD_REGULATOR flag to be able to set/get regulator state int U-boot command line. Disable PMIC_CHILDREN as this flag is not needed in SPL for STM32MP1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 15:13:12 +00:00
CONFIG_CMD_REGULATOR=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_DOS_PARTITION is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-03 19:26:12 +00:00
CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
configs: stm32mp15: enable ADC Enable ADC on stm32mp15. - CONFIG_CMD_ADC - CONFIG_STM32_ADC Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-24 14:31:32 +00:00
CONFIG_STM32_ADC=y
hwspinlock: add stm32 hardware spinlock support Implement hardware spinlock support for STM32MP1. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-11-27 12:49:52 +00:00
CONFIG_DM_HWSPINLOCK=y
CONFIG_HWSPINLOCK_STM32=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_STM32F7=y
stm32mp1: add gpio led support This patch add the 4 LED available on the ED1 board and activated gpio led driver. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-27 14:37:05 +00:00
CONFIG_LED=y
CONFIG_LED_GPIO=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_DM_MMC=y
CONFIG_STM32_SDMMC2=y
configs: stm32mp15: Enable USB relative flags Enable config USB relative flags in order to enable USB EHCI, DWC2 gadget, download and mass_storage support. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-10 15:12:13 +00:00
CONFIG_PHY=y
CONFIG_PHY_STM32_USBPHYC=y
stm32mp1: add support for stm32mp157c-ev1 board Add support of stm32mp157c-ev1, the evaluation board with pmic stpmu1 (ev1 = mother board + daughter ed1) with device tree. EV1 is the selected board by default in basic defconfig. PS: CONFIG_PINCTRL_FULL activation avoid to increase SYS_MALLOC_F_LEN (Early malloc usage: 2034) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-09 13:17:22 +00:00
# CONFIG_PINCTRL_FULL is not set
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
# CONFIG_SPL_PINCTRL_FULL is not set
CONFIG_DM_PMIC=y
configs: stm32mp15_basic: Set regulator relative flags Enable DM_REGULATOR_STPMU1 flag to activate regulator driver for STM32MP15 SoC and CMD_REGULATOR flag to be able to set/get regulator state int U-boot command line. Disable PMIC_CHILDREN as this flag is not needed in SPL for STM32MP1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 15:13:12 +00:00
# CONFIG_SPL_PMIC_CHILDREN is not set
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_PMIC_STPMU1=y
stm32mp1: activate FIXED regulator Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-09 13:17:23 +00:00
CONFIG_DM_REGULATOR_FIXED=y
configs: stm32mp15_basic: Set regulator relative flags Enable DM_REGULATOR_STPMU1 flag to activate regulator driver for STM32MP15 SoC and CMD_REGULATOR flag to be able to set/get regulator state int U-boot command line. Disable PMIC_CHILDREN as this flag is not needed in SPL for STM32MP1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 15:13:12 +00:00
CONFIG_DM_REGULATOR_GPIO=y
configs: stm32mp15: Enable STM32_VREFBUF flag Enable vrefbuf on stm32mp15, to be used by ADC. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 15:00:48 +00:00
CONFIG_DM_REGULATOR_STM32_VREFBUF=y
configs: stm32mp15_basic: Set regulator relative flags Enable DM_REGULATOR_STPMU1 flag to activate regulator driver for STM32MP15 SoC and CMD_REGULATOR flag to be able to set/get regulator state int U-boot command line. Disable PMIC_CHILDREN as this flag is not needed in SPL for STM32MP1. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-26 15:13:12 +00:00
CONFIG_DM_REGULATOR_STPMU1=y
stm32mp1: activate serial rx buffer Activate the serial rx buffer. Prepare console MUX activation with vidconsole, and avoid console performance issue (missing character for copy-paste). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-08-03 11:38:42 +00:00
CONFIG_SERIAL_RX_BUFFER=y
board: st: add generic board for STM32MP1 family Add first support for STM32MP157C-ED1 board with "Basic" boot chain 1/ Boot Rom: load SPL with STM32 image header in SYSRAM 2/ SPL: power up and initialize the DDR and load U-Boot image from SDCARD in DDR 3/ U-Boot: search and load extlinux.conf in SDCARD (DISTRO activated) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-12 09:46:18 +00:00
CONFIG_STM32_SERIAL=y
configs: stm32mp15: Enable USB relative flags Enable config USB relative flags in order to enable USB EHCI, DWC2 gadget, download and mass_storage support. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-10 15:12:13 +00:00
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_DWC2=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
CONFIG_USB_GADGET_VENDOR_NUM=0x0483
CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DOWNLOAD=y
Reference in a new issue Copy permalink