pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
|
2016-11-04 10:57:02 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_IMX5) += pinctrl-imx5.o
|
pinctrl: imx: Introduce pinctrl driver for i.MX6
Introduce pinctrl for i.MX6
1. pinctrl-imx.c is for common usage. It's used by i.MX6/7.
2. Add PINCTRL_IMX PINCTRL_IMX6 Kconfig entry.
3. To the pinctrl_ops implementation, only set_state is implemented.
To i.MX6/7, the pinctrl dts entry is as following:
&iomuxc {
pinctrl-names = "default";
pinctrl_csi1: csi1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
>;
};
[.....]
};
there is no property named function or groups. So pinctrl_generic_set_state
can not be used here.
5. This driver is a simple implementation for i.mx iomux controller,
only parse the fsl,pins property and write value to registers.
6. With DEBUG enabled, we can see log when "i2c bus 0":
"
set_state_simple op missing
imx_pinctrl_set_state: i2c1grp
mux_reg 0x14c, conf_reg 0x3bc, input_reg 0x5d8, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x14c val 0x10
select_input: offset 0x5d8 val 0x1
write config: offset 0x3bc val 0x7f
mux_reg 0x148, conf_reg 0x3b8, input_reg 0x5d4, mux_mode 0x0, input_val 0x1, config_val 0x4000007f
write mux: offset 0x148 val 0x10
select_input: offset 0x5d4 val 0x1
write config: offset 0x3b8 val 0x7f
"
this means imx6 pinctrl driver works as expected.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-03 02:06:07 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_IMX6) += pinctrl-imx6.o
|
2016-02-03 02:06:08 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_IMX7) += pinctrl-imx7.o
|
2017-02-22 08:21:49 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_IMX7ULP) += pinctrl-imx7ulp.o
|
2021-08-07 08:00:43 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_IMX8ULP) += pinctrl-imx8ulp.o
|
2018-10-18 12:28:28 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_IMX_SCU) += pinctrl-scu.o
|
|
|
|
|
obj-$(CONFIG_PINCTRL_IMX8) += pinctrl-imx8.o
|
2019-01-28 09:43:42 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_IMX8M) += pinctrl-imx8m.o
|
2022-07-26 08:40:42 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_IMX93) += pinctrl-imx93.o
|
2019-06-19 15:31:06 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o
|
2018-11-19 23:38:06 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_VYBRID) += pinctrl-vf610.o
|
2020-01-10 14:47:02 +00:00
|
|
|
obj-$(CONFIG_PINCTRL_IMXRT) += pinctrl-imxrt.o
|
