u-boot/drivers/net/xilinx_emaclite.c

641 lines
16 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2007-2009 Michal Simek
* (C) Copyright 2003 Xilinx Inc.
*
* Michal SIMEK <monstr@monstr.eu>
*/
#include <common.h>
#include <log.h>
#include <net.h>
#include <config.h>
#include <dm.h>
#include <console.h>
#include <malloc.h>
#include <asm/io.h>
#include <phy.h>
#include <miiphy.h>
#include <fdtdec.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
#define ENET_ADDR_LENGTH 6
#define ETH_FCS_LEN 4 /* Octets in the FCS */
/* Xmit complete */
#define XEL_TSR_XMIT_BUSY_MASK 0x00000001UL
/* Xmit interrupt enable bit */
#define XEL_TSR_XMIT_IE_MASK 0x00000008UL
/* Program the MAC address */
#define XEL_TSR_PROGRAM_MASK 0x00000002UL
/* define for programming the MAC address into the EMAC Lite */
#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
/* Transmit packet length upper byte */
#define XEL_TPLR_LENGTH_MASK_HI 0x0000FF00UL
/* Transmit packet length lower byte */
#define XEL_TPLR_LENGTH_MASK_LO 0x000000FFUL
/* Recv complete */
#define XEL_RSR_RECV_DONE_MASK 0x00000001UL
/* Recv interrupt enable bit */
#define XEL_RSR_RECV_IE_MASK 0x00000008UL
/* MDIO Address Register Bit Masks */
#define XEL_MDIOADDR_REGADR_MASK 0x0000001F /* Register Address */
#define XEL_MDIOADDR_PHYADR_MASK 0x000003E0 /* PHY Address */
#define XEL_MDIOADDR_PHYADR_SHIFT 5
#define XEL_MDIOADDR_OP_MASK 0x00000400 /* RD/WR Operation */
/* MDIO Write Data Register Bit Masks */
#define XEL_MDIOWR_WRDATA_MASK 0x0000FFFF /* Data to be Written */
/* MDIO Read Data Register Bit Masks */
#define XEL_MDIORD_RDDATA_MASK 0x0000FFFF /* Data to be Read */
/* MDIO Control Register Bit Masks */
#define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001 /* MDIO Status Mask */
#define XEL_MDIOCTRL_MDIOEN_MASK 0x00000008 /* MDIO Enable */
struct emaclite_regs {
u32 tx_ping; /* 0x0 - TX Ping buffer */
u32 reserved1[504];
u32 mdioaddr; /* 0x7e4 - MDIO Address Register */
u32 mdiowr; /* 0x7e8 - MDIO Write Data Register */
u32 mdiord;/* 0x7ec - MDIO Read Data Register */
u32 mdioctrl; /* 0x7f0 - MDIO Control Register */
u32 tx_ping_tplr; /* 0x7f4 - Tx packet length */
u32 global_interrupt; /* 0x7f8 - Global interrupt enable */
u32 tx_ping_tsr; /* 0x7fc - Tx status */
u32 tx_pong; /* 0x800 - TX Pong buffer */
u32 reserved2[508];
u32 tx_pong_tplr; /* 0xff4 - Tx packet length */
u32 reserved3; /* 0xff8 */
u32 tx_pong_tsr; /* 0xffc - Tx status */
u32 rx_ping; /* 0x1000 - Receive Buffer */
u32 reserved4[510];
u32 rx_ping_rsr; /* 0x17fc - Rx status */
u32 rx_pong; /* 0x1800 - Receive Buffer */
u32 reserved5[510];
u32 rx_pong_rsr; /* 0x1ffc - Rx status */
};
struct xemaclite {
bool use_rx_pong_buffer_next; /* Next RX buffer to read from */
u32 txpp; /* TX ping pong buffer */
u32 rxpp; /* RX ping pong buffer */
int phyaddr;
struct emaclite_regs *regs;
struct phy_device *phydev;
struct mii_dev *bus;
};
static uchar etherrxbuff[PKTSIZE_ALIGN]; /* Receive buffer */
static void xemaclite_alignedread(u32 *srcptr, void *destptr, u32 bytecount)
{
u32 i;
u32 alignbuffer;
u32 *to32ptr;
u32 *from32ptr;
u8 *to8ptr;
u8 *from8ptr;
from32ptr = (u32 *) srcptr;
/* Word aligned buffer, no correction needed. */
to32ptr = (u32 *) destptr;
while (bytecount > 3) {
*to32ptr++ = *from32ptr++;
bytecount -= 4;
}
to8ptr = (u8 *) to32ptr;
alignbuffer = *from32ptr++;
from8ptr = (u8 *) &alignbuffer;
for (i = 0; i < bytecount; i++)
*to8ptr++ = *from8ptr++;
}
static void xemaclite_alignedwrite(void *srcptr, u32 *destptr, u32 bytecount)
{
u32 i;
u32 alignbuffer;
u32 *to32ptr = (u32 *) destptr;
u32 *from32ptr;
u8 *to8ptr;
u8 *from8ptr;
from32ptr = (u32 *) srcptr;
while (bytecount > 3) {
*to32ptr++ = *from32ptr++;
bytecount -= 4;
}
alignbuffer = 0;
to8ptr = (u8 *) &alignbuffer;
from8ptr = (u8 *) from32ptr;
for (i = 0; i < bytecount; i++)
*to8ptr++ = *from8ptr++;
*to32ptr++ = alignbuffer;
}
static int wait_for_bit(const char *func, u32 *reg, const u32 mask,
bool set, unsigned int timeout)
{
u32 val;
unsigned long start = get_timer(0);
while (1) {
val = __raw_readl(reg);
if (!set)
val = ~val;
if ((val & mask) == mask)
return 0;
if (get_timer(start) > timeout)
break;
if (ctrlc()) {
puts("Abort\n");
return -EINTR;
}
udelay(1);
}
debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
func, reg, mask, set);
return -ETIMEDOUT;
}
static int mdio_wait(struct emaclite_regs *regs)
{
return wait_for_bit(__func__, &regs->mdioctrl,
XEL_MDIOCTRL_MDIOSTS_MASK, false, 2000);
}
static u32 phyread(struct xemaclite *emaclite, u32 phyaddress, u32 registernum,
u16 *data)
{
struct emaclite_regs *regs = emaclite->regs;
if (mdio_wait(regs))
return 1;
u32 ctrl_reg = __raw_readl(&regs->mdioctrl);
__raw_writel(XEL_MDIOADDR_OP_MASK
| ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT)
| registernum), &regs->mdioaddr);
__raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, &regs->mdioctrl);
if (mdio_wait(regs))
return 1;
/* Read data */
*data = __raw_readl(&regs->mdiord);
return 0;
}
static u32 phywrite(struct xemaclite *emaclite, u32 phyaddress, u32 registernum,
u16 data)
{
struct emaclite_regs *regs = emaclite->regs;
if (mdio_wait(regs))
return 1;
/*
* Write the PHY address, register number and clear the OP bit in the
* MDIO Address register and then write the value into the MDIO Write
* Data register. Finally, set the Status bit in the MDIO Control
* register to start a MDIO write transaction.
*/
u32 ctrl_reg = __raw_readl(&regs->mdioctrl);
__raw_writel(~XEL_MDIOADDR_OP_MASK
& ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT)
| registernum), &regs->mdioaddr);
__raw_writel(data, &regs->mdiowr);
__raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, &regs->mdioctrl);
if (mdio_wait(regs))
return 1;
return 0;
}
static void emaclite_stop(struct udevice *dev)
{
debug("eth_stop\n");
}
/* Use MII register 1 (MII status register) to detect PHY */
#define PHY_DETECT_REG 1
/* Mask used to verify certain PHY features (or register contents)
* in the register above:
* 0x1000: 10Mbps full duplex support
* 0x0800: 10Mbps half duplex support
* 0x0008: Auto-negotiation support
*/
#define PHY_DETECT_MASK 0x1808
static int setup_phy(struct udevice *dev)
{
int i, ret;
u16 phyreg;
struct xemaclite *emaclite = dev_get_priv(dev);
struct phy_device *phydev;
u32 supported = SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full;
if (emaclite->phyaddr != -1) {
phyread(emaclite, emaclite->phyaddr, PHY_DETECT_REG, &phyreg);
if ((phyreg != 0xFFFF) &&
((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
/* Found a valid PHY address */
debug("Default phy address %d is valid\n",
emaclite->phyaddr);
} else {
debug("PHY address is not setup correctly %d\n",
emaclite->phyaddr);
emaclite->phyaddr = -1;
}
}
if (emaclite->phyaddr == -1) {
/* detect the PHY address */
for (i = 31; i >= 0; i--) {
phyread(emaclite, i, PHY_DETECT_REG, &phyreg);
if ((phyreg != 0xFFFF) &&
((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) {
/* Found a valid PHY address */
emaclite->phyaddr = i;
debug("emaclite: Found valid phy address, %d\n",
i);
break;
}
}
}
/* interface - look at tsec */
phydev = phy_connect(emaclite->bus, emaclite->phyaddr, dev,
PHY_INTERFACE_MODE_MII);
/*
* Phy can support 1000baseT but device NOT that's why phydev->supported
* must be setup for 1000baseT. phydev->advertising setups what speeds
* will be used for autonegotiation where 1000baseT must be disabled.
*/
phydev->supported = supported | SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full;
phydev->advertising = supported;
emaclite->phydev = phydev;
phy_config(phydev);
ret = phy_startup(phydev);
if (ret)
return ret;
if (!phydev->link) {
printf("%s: No link.\n", phydev->dev->name);
return 0;
}
/* Do not setup anything */
return 1;
}
static int emaclite_start(struct udevice *dev)
{
struct xemaclite *emaclite = dev_get_priv(dev);
struct eth_pdata *pdata = dev_get_platdata(dev);
struct emaclite_regs *regs = emaclite->regs;
debug("EmacLite Initialization Started\n");
/*
* TX - TX_PING & TX_PONG initialization
*/
/* Restart PING TX */
__raw_writel(0, &regs->tx_ping_tsr);
/* Copy MAC address */
xemaclite_alignedwrite(pdata->enetaddr, &regs->tx_ping,
ENET_ADDR_LENGTH);
/* Set the length */
__raw_writel(ENET_ADDR_LENGTH, &regs->tx_ping_tplr);
/* Update the MAC address in the EMAC Lite */
__raw_writel(XEL_TSR_PROG_MAC_ADDR, &regs->tx_ping_tsr);
/* Wait for EMAC Lite to finish with the MAC address update */
while ((__raw_readl(&regs->tx_ping_tsr) &
XEL_TSR_PROG_MAC_ADDR) != 0)
;
if (emaclite->txpp) {
/* The same operation with PONG TX */
__raw_writel(0, &regs->tx_pong_tsr);
xemaclite_alignedwrite(pdata->enetaddr, &regs->tx_pong,
ENET_ADDR_LENGTH);
__raw_writel(ENET_ADDR_LENGTH, &regs->tx_pong_tplr);
__raw_writel(XEL_TSR_PROG_MAC_ADDR, &regs->tx_pong_tsr);
while ((__raw_readl(&regs->tx_pong_tsr) &
XEL_TSR_PROG_MAC_ADDR) != 0)
;
}
/*
* RX - RX_PING & RX_PONG initialization
*/
/* Write out the value to flush the RX buffer */
__raw_writel(XEL_RSR_RECV_IE_MASK, &regs->rx_ping_rsr);
if (emaclite->rxpp)
__raw_writel(XEL_RSR_RECV_IE_MASK, &regs->rx_pong_rsr);
__raw_writel(XEL_MDIOCTRL_MDIOEN_MASK, &regs->mdioctrl);
if (__raw_readl(&regs->mdioctrl) & XEL_MDIOCTRL_MDIOEN_MASK)
if (!setup_phy(dev))
return -1;
debug("EmacLite Initialization complete\n");
return 0;
}
static int xemaclite_txbufferavailable(struct xemaclite *emaclite)
{
u32 tmp;
struct emaclite_regs *regs = emaclite->regs;
/*
* Read the other buffer register
* and determine if the other buffer is available
*/
tmp = ~__raw_readl(&regs->tx_ping_tsr);
if (emaclite->txpp)
tmp |= ~__raw_readl(&regs->tx_pong_tsr);
return !(tmp & XEL_TSR_XMIT_BUSY_MASK);
}
static int emaclite_send(struct udevice *dev, void *ptr, int len)
{
u32 reg;
struct xemaclite *emaclite = dev_get_priv(dev);
struct emaclite_regs *regs = emaclite->regs;
u32 maxtry = 1000;
if (len > PKTSIZE)
len = PKTSIZE;
while (xemaclite_txbufferavailable(emaclite) && maxtry) {
udelay(10);
maxtry--;
}
if (!maxtry) {
printf("Error: Timeout waiting for ethernet TX buffer\n");
/* Restart PING TX */
__raw_writel(0, &regs->tx_ping_tsr);
if (emaclite->txpp) {
__raw_writel(0, &regs->tx_pong_tsr);
}
return -1;
}
/* Determine if the expected buffer address is empty */
reg = __raw_readl(&regs->tx_ping_tsr);
if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) {
debug("Send packet from tx_ping buffer\n");
/* Write the frame to the buffer */
xemaclite_alignedwrite(ptr, &regs->tx_ping, len);
__raw_writel(len
& (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO),
&regs->tx_ping_tplr);
reg = __raw_readl(&regs->tx_ping_tsr);
reg |= XEL_TSR_XMIT_BUSY_MASK;
__raw_writel(reg, &regs->tx_ping_tsr);
return 0;
}
if (emaclite->txpp) {
/* Determine if the expected buffer address is empty */
reg = __raw_readl(&regs->tx_pong_tsr);
if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) {
debug("Send packet from tx_pong buffer\n");
/* Write the frame to the buffer */
xemaclite_alignedwrite(ptr, &regs->tx_pong, len);
__raw_writel(len &
(XEL_TPLR_LENGTH_MASK_HI |
XEL_TPLR_LENGTH_MASK_LO),
&regs->tx_pong_tplr);
reg = __raw_readl(&regs->tx_pong_tsr);
reg |= XEL_TSR_XMIT_BUSY_MASK;
__raw_writel(reg, &regs->tx_pong_tsr);
return 0;
}
}
puts("Error while sending frame\n");
return -1;
}
static int emaclite_recv(struct udevice *dev, int flags, uchar **packetp)
{
u32 length, first_read, reg, attempt = 0;
void *addr, *ack;
struct xemaclite *emaclite = dev->priv;
struct emaclite_regs *regs = emaclite->regs;
struct ethernet_hdr *eth;
struct ip_udp_hdr *ip;
try_again:
if (!emaclite->use_rx_pong_buffer_next) {
reg = __raw_readl(&regs->rx_ping_rsr);
debug("Testing data at rx_ping\n");
if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
debug("Data found in rx_ping buffer\n");
addr = &regs->rx_ping;
ack = &regs->rx_ping_rsr;
} else {
debug("Data not found in rx_ping buffer\n");
/* Pong buffer is not available - return immediately */
if (!emaclite->rxpp)
return -1;
/* Try pong buffer if this is first attempt */
if (attempt++)
return -1;
emaclite->use_rx_pong_buffer_next =
!emaclite->use_rx_pong_buffer_next;
goto try_again;
}
} else {
reg = __raw_readl(&regs->rx_pong_rsr);
debug("Testing data at rx_pong\n");
if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
debug("Data found in rx_pong buffer\n");
addr = &regs->rx_pong;
ack = &regs->rx_pong_rsr;
} else {
debug("Data not found in rx_pong buffer\n");
/* Try ping buffer if this is first attempt */
if (attempt++)
return -1;
emaclite->use_rx_pong_buffer_next =
!emaclite->use_rx_pong_buffer_next;
goto try_again;
}
}
/* Read all bytes for ARP packet with 32bit alignment - 48bytes */
first_read = ALIGN(ETHER_HDR_SIZE + ARP_HDR_SIZE + ETH_FCS_LEN, 4);
xemaclite_alignedread(addr, etherrxbuff, first_read);
/* Detect real packet size */
eth = (struct ethernet_hdr *)etherrxbuff;
switch (ntohs(eth->et_protlen)) {
case PROT_ARP:
length = first_read;
debug("ARP Packet %x\n", length);
break;
case PROT_IP:
ip = (struct ip_udp_hdr *)(etherrxbuff + ETHER_HDR_SIZE);
length = ntohs(ip->ip_len);
length += ETHER_HDR_SIZE + ETH_FCS_LEN;
debug("IP Packet %x\n", length);
break;
default:
debug("Other Packet\n");
length = PKTSIZE;
break;
}
/* Read the rest of the packet which is longer then first read */
if (length != first_read)
xemaclite_alignedread(addr + first_read,
etherrxbuff + first_read,
length - first_read);
/* Acknowledge the frame */
reg = __raw_readl(ack);
reg &= ~XEL_RSR_RECV_DONE_MASK;
__raw_writel(reg, ack);
debug("Packet receive from 0x%p, length %dB\n", addr, length);
*packetp = etherrxbuff;
return length;
}
static int emaclite_miiphy_read(struct mii_dev *bus, int addr,
int devad, int reg)
{
u32 ret;
u16 val = 0;
ret = phyread(bus->priv, addr, reg, &val);
debug("emaclite: Read MII 0x%x, 0x%x, 0x%x, %d\n", addr, reg, val, ret);
return val;
}
static int emaclite_miiphy_write(struct mii_dev *bus, int addr, int devad,
int reg, u16 value)
{
debug("emaclite: Write MII 0x%x, 0x%x, 0x%x\n", addr, reg, value);
return phywrite(bus->priv, addr, reg, value);
}
static int emaclite_probe(struct udevice *dev)
{
struct xemaclite *emaclite = dev_get_priv(dev);
int ret;
emaclite->bus = mdio_alloc();
emaclite->bus->read = emaclite_miiphy_read;
emaclite->bus->write = emaclite_miiphy_write;
emaclite->bus->priv = emaclite;
ret = mdio_register_seq(emaclite->bus, dev->seq);
if (ret)
return ret;
return 0;
}
static int emaclite_remove(struct udevice *dev)
{
struct xemaclite *emaclite = dev_get_priv(dev);
free(emaclite->phydev);
mdio_unregister(emaclite->bus);
mdio_free(emaclite->bus);
return 0;
}
static const struct eth_ops emaclite_ops = {
.start = emaclite_start,
.send = emaclite_send,
.recv = emaclite_recv,
.stop = emaclite_stop,
};
static int emaclite_ofdata_to_platdata(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_platdata(dev);
struct xemaclite *emaclite = dev_get_priv(dev);
int offset = 0;
pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
emaclite->regs = (struct emaclite_regs *)ioremap_nocache(pdata->iobase,
0x10000);
emaclite->phyaddr = -1;
offset = fdtdec_lookup_phandle(gd->fdt_blob, dev_of_offset(dev),
"phy-handle");
if (offset > 0)
emaclite->phyaddr = fdtdec_get_int(gd->fdt_blob, offset,
"reg", -1);
emaclite->txpp = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"xlnx,tx-ping-pong", 0);
emaclite->rxpp = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"xlnx,rx-ping-pong", 0);
printf("EMACLITE: %lx, phyaddr %d, %d/%d\n", (ulong)emaclite->regs,
emaclite->phyaddr, emaclite->txpp, emaclite->rxpp);
return 0;
}
static const struct udevice_id emaclite_ids[] = {
{ .compatible = "xlnx,xps-ethernetlite-1.00.a" },
{ }
};
U_BOOT_DRIVER(emaclite) = {
.name = "emaclite",
.id = UCLASS_ETH,
.of_match = emaclite_ids,
.ofdata_to_platdata = emaclite_ofdata_to_platdata,
.probe = emaclite_probe,
.remove = emaclite_remove,
.ops = &emaclite_ops,
.priv_auto_alloc_size = sizeof(struct xemaclite),
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
};