mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
324 lines
6.6 KiB
Text
324 lines
6.6 KiB
Text
|
/*
|
||
|
|
* am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
|
||
|
|
*
|
||
|
|
* Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License version 2 as
|
||
|
|
* published by the Free Software Foundation.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
|
||
|
|
#include "am33xx.dtsi"
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
cpus {
|
||
|
|
cpu@0 {
|
||
|
|
cpu0-supply = <&vdd1_reg>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
memory@80000000 {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||
|
|
};
|
||
|
|
|
||
|
|
leds {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&leds_pins>;
|
||
|
|
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
|
||
|
|
led0 {
|
||
|
|
label = "com:green:user";
|
||
|
|
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
||
|
|
default-state = "on";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vbat: fixedregulator0 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vbat";
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vmmc: fixedregulator1 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vmmc";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&am33xx_pinmux {
|
||
|
|
i2c0_pins: pinmux_i2c0_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
||
|
|
AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
nandflash_pins: pinmux_nandflash_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
|
||
|
|
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
|
||
|
|
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
|
||
|
|
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
|
||
|
|
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
|
||
|
|
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
|
||
|
|
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
|
||
|
|
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
|
||
|
|
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
|
||
|
|
AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
|
||
|
|
AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
|
||
|
|
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
|
||
|
|
AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
|
||
|
|
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
|
||
|
|
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart0_pins: pinmux_uart0_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
|
||
|
|
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
leds_pins: pinmux_leds_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&mac {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&davinci_mdio {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpsw_emac0 {
|
||
|
|
phy_id = <&davinci_mdio>, <0>;
|
||
|
|
phy-mode = "rmii";
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpsw_emac1 {
|
||
|
|
phy_id = <&davinci_mdio>, <1>;
|
||
|
|
phy-mode = "rmii";
|
||
|
|
};
|
||
|
|
|
||
|
|
&phy_sel {
|
||
|
|
rmii-clock-ext;
|
||
|
|
};
|
||
|
|
|
||
|
|
&elm {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpmc {
|
||
|
|
status = "okay";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&nandflash_pins>;
|
||
|
|
|
||
|
|
ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
|
||
|
|
|
||
|
|
nand@0,0 {
|
||
|
|
compatible = "ti,omap2-nand";
|
||
|
|
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
||
|
|
interrupt-parent = <&gpmc>;
|
||
|
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
||
|
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
||
|
|
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
|
||
|
|
nand-bus-width = <8>;
|
||
|
|
ti,nand-ecc-opt = "bch8";
|
||
|
|
gpmc,device-width = <1>;
|
||
|
|
gpmc,sync-clk-ps = <0>;
|
||
|
|
gpmc,cs-on-ns = <0>;
|
||
|
|
gpmc,cs-rd-off-ns = <44>;
|
||
|
|
gpmc,cs-wr-off-ns = <44>;
|
||
|
|
gpmc,adv-on-ns = <6>;
|
||
|
|
gpmc,adv-rd-off-ns = <34>;
|
||
|
|
gpmc,adv-wr-off-ns = <44>;
|
||
|
|
gpmc,we-on-ns = <0>;
|
||
|
|
gpmc,we-off-ns = <40>;
|
||
|
|
gpmc,oe-on-ns = <0>;
|
||
|
|
gpmc,oe-off-ns = <54>;
|
||
|
|
gpmc,access-ns = <64>;
|
||
|
|
gpmc,rd-cycle-ns = <82>;
|
||
|
|
gpmc,wr-cycle-ns = <82>;
|
||
|
|
gpmc,bus-turnaround-ns = <0>;
|
||
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
||
|
|
gpmc,clk-activation-ns = <0>;
|
||
|
|
gpmc,wr-access-ns = <40>;
|
||
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
||
|
|
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ti,elm-id = <&elm>;
|
||
|
|
|
||
|
|
/* MTD partition table */
|
||
|
|
partition@0 {
|
||
|
|
label = "SPL";
|
||
|
|
reg = <0x00000000 0x000080000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@1 {
|
||
|
|
label = "U-boot";
|
||
|
|
reg = <0x00080000 0x001e0000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@2 {
|
||
|
|
label = "U-Boot Env";
|
||
|
|
reg = <0x00260000 0x00020000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@3 {
|
||
|
|
label = "Kernel";
|
||
|
|
reg = <0x00280000 0x00500000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@4 {
|
||
|
|
label = "File System";
|
||
|
|
reg = <0x00780000 0x007880000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c0 {
|
||
|
|
status = "okay";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&i2c0_pins>;
|
||
|
|
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
tps: tps@2d {
|
||
|
|
reg = <0x2d>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&mmc1 {
|
||
|
|
status = "okay";
|
||
|
|
vmmc-supply = <&vmmc>;
|
||
|
|
bus-width = <4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart0 {
|
||
|
|
status = "okay";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart0_pins>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_ctrl_mod {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb0_phy {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb1_phy {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb1 {
|
||
|
|
status = "okay";
|
||
|
|
dr_mode = "host";
|
||
|
|
};
|
||
|
|
|
||
|
|
&cppi41dma {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
#include "tps65910.dtsi"
|
||
|
|
|
||
|
|
&tps {
|
||
|
|
vcc1-supply = <&vbat>;
|
||
|
|
vcc2-supply = <&vbat>;
|
||
|
|
vcc3-supply = <&vbat>;
|
||
|
|
vcc4-supply = <&vbat>;
|
||
|
|
vcc5-supply = <&vbat>;
|
||
|
|
vcc6-supply = <&vbat>;
|
||
|
|
vcc7-supply = <&vbat>;
|
||
|
|
vccio-supply = <&vbat>;
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
vrtc_reg: regulator@0 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vio_reg: regulator@1 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd1_reg: regulator@2 {
|
||
|
|
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
|
||
|
|
regulator-name = "vdd_mpu";
|
||
|
|
regulator-min-microvolt = <912500>;
|
||
|
|
regulator-max-microvolt = <1312500>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd2_reg: regulator@3 {
|
||
|
|
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
|
||
|
|
regulator-name = "vdd_core";
|
||
|
|
regulator-min-microvolt = <912500>;
|
||
|
|
regulator-max-microvolt = <1150000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd3_reg: regulator@4 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdig1_reg: regulator@5 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdig2_reg: regulator@6 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vpll_reg: regulator@7 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdac_reg: regulator@8 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vaux1_reg: regulator@9 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vaux2_reg: regulator@10 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vaux33_reg: regulator@11 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vmmc_reg: regulator@12 {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|