u-boot/include/configs/sun4i.h

/*
 * (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>
 *
 * Configuration settings for the Allwinner A10 (sun4i) CPU
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * A10 specific configuration
 */
#define CONFIG_CLK_FULL_SPEED		1008000000

#define CONFIG_SYS_PROMPT		"sun4i# "
#define CONFIG_MACH_TYPE		4104

#ifdef CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_SUNXI

#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
#ifndef CONFIG_SUNXI_USB_VBUS0_GPIO
#define CONFIG_SUNXI_USB_VBUS0_GPIO	SUNXI_GPH(6)
#endif
#ifndef CONFIG_SUNXI_USB_VBUS1_GPIO
#define CONFIG_SUNXI_USB_VBUS1_GPIO	SUNXI_GPH(3)
#endif
#endif

/*
 * Include common sunxi configuration where most the settings are
 */
#include <configs/sunxi-common.h>

#endif /* __CONFIG_H */
sunxi: Add sun4i support Add support for the Allwinner A10 SoC also known as the Allwinner sun4i family, and add the Cubieboard board which uses the A10 SoC. Compared to sun7 only the DRAM controller is a bit different: -Controller reset bits are inverted, but only for Rev. A -Different hpcr values -No MBUS on sun4i -Various other initialization changes Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-06-09 09:36:57 +00:00			`/*`
			`* (C) Copyright 2012-2013 Henrik Nordstrom <henrik@henriknordstrom.net>`
			`*`
			`* Configuration settings for the Allwinner A10 (sun4i) CPU`
			`*`
			`* SPDX-License-Identifier: GPL-2.0+`
			`*/`
			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

			`/*`
			`* A10 specific configuration`
			`*/`
sunxi: Add axp209 pmic support Add support for the x-powers axp209 pmic which is found on most A10, A13 and A20 boards. And enable AXP209 support for the Cubietruck and Cubieboard boards. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-06-13 20:55:50 +00:00			`#define CONFIG_CLK_FULL_SPEED 1008000000`
sunxi: Add sun4i support Add support for the Allwinner A10 SoC also known as the Allwinner sun4i family, and add the Cubieboard board which uses the A10 SoC. Compared to sun7 only the DRAM controller is a bit different: -Controller reset bits are inverted, but only for Rev. A -Different hpcr values -No MBUS on sun4i -Various other initialization changes Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-06-09 09:36:57 +00:00
			`#define CONFIG_SYS_PROMPT "sun4i# "`
sunxi: Add CONFIG_MACH_TYPE defines to sun4i, sun5i and sun7i Many people are still using old linux-sunxi-3.4 kernels on sunxi devices, adding the proper MACH_TYPE defines for this allows people to switch to upstream u-boot, so that we can stop maintaining the linux-sunxi u-boot fork. These machine-ids are all properly registered at: http://www.arm.linux.org.uk/developer/machines/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-10-13 05:41:16 +00:00			`#define CONFIG_MACH_TYPE 4104`
sunxi: Add sun4i support Add support for the Allwinner A10 SoC also known as the Allwinner sun4i family, and add the Cubieboard board which uses the A10 SoC. Compared to sun7 only the DRAM controller is a bit different: -Controller reset bits are inverted, but only for Rev. A -Different hpcr values -No MBUS on sun4i -Various other initialization changes Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-06-09 09:36:57 +00:00
sun4i: add USB EHCI settings Specific USB EHCI settings to be set for sun4i if CONFIG_USB_EHCI is enabled. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-07-26 17:08:11 +00:00			`#ifdef CONFIG_USB_EHCI`
			`#define CONFIG_USB_EHCI_SUNXI`

			`#define CONFIG_USB_MAX_CONTROLLER_COUNT 2`
			`#ifndef CONFIG_SUNXI_USB_VBUS0_GPIO`
			`#define CONFIG_SUNXI_USB_VBUS0_GPIO SUNXI_GPH(6)`
			`#endif`
			`#ifndef CONFIG_SUNXI_USB_VBUS1_GPIO`
			`#define CONFIG_SUNXI_USB_VBUS1_GPIO SUNXI_GPH(3)`
			`#endif`
			`#endif`

sunxi: Add sun4i support Add support for the Allwinner A10 SoC also known as the Allwinner sun4i family, and add the Cubieboard board which uses the A10 SoC. Compared to sun7 only the DRAM controller is a bit different: -Controller reset bits are inverted, but only for Rev. A -Different hpcr values -No MBUS on sun4i -Various other initialization changes Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2014-06-09 09:36:57 +00:00			`/*`
			`* Include common sunxi configuration where most the settings are`
			`*/`
			`#include <configs/sunxi-common.h>`

			`#endif /* __CONFIG_H */`