u-boot/board/Seagate/dockstar/dockstar.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2010  Eric C. Cooper <ecc@cmu.edu>
 *
 * Based on sheevaplug.h originally written by
 * Prafulla Wadaskar <prafulla@marvell.com>
 * (C) Copyright 2009
 * Marvell Semiconductor <www.marvell.com>
 */

#ifndef __DOCKSTAR_H
#define __DOCKSTAR_H

#define DOCKSTAR_OE_LOW		(~(0))
#define DOCKSTAR_OE_HIGH		(~(0))
#define DOCKSTAR_OE_VAL_LOW		(1 << 29)	/* USB_PWEN low */
#define DOCKSTAR_OE_VAL_HIGH		(1 << 17)	/* LED pin high */

/* PHY related */
#define MV88E1116_LED_FCTRL_REG		10
#define MV88E1116_CPRSP_CR3_REG		21
#define MV88E1116_MAC_CTRL_REG		21
#define MV88E1116_PGADR_REG		22
#define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)

#endif /* __DOCKSTAR_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
Seagate FreeAgent DockStar support start with sheevaplug configuration add modifications by Alexander Holler <holler@ahsoftware.de> change RAM definitions to one bank (128 MB) change ident string and prompt define MTD partitions and default environment variables add support for LEDs Signed-off-by: Eric Cooper <ecc@cmu.edu> 2010-11-24 11:41:32 +00:00			`/*`
			`* Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>`
			`*`
			`* Based on sheevaplug.h originally written by`
			`* Prafulla Wadaskar <prafulla@marvell.com>`
			`* (C) Copyright 2009`
			`* Marvell Semiconductor <www.marvell.com>`
			`*/`

			`#ifndef __DOCKSTAR_H`
			`#define __DOCKSTAR_H`

			`#define DOCKSTAR_OE_LOW (~(0))`
			`#define DOCKSTAR_OE_HIGH (~(0))`
			`#define DOCKSTAR_OE_VAL_LOW (1 << 29) /* USB_PWEN low */`
			`#define DOCKSTAR_OE_VAL_HIGH (1 << 17) /* LED pin high */`

			`/* PHY related */`
			`#define MV88E1116_LED_FCTRL_REG 10`
			`#define MV88E1116_CPRSP_CR3_REG 21`
			`#define MV88E1116_MAC_CTRL_REG 21`
			`#define MV88E1116_PGADR_REG 22`
			`#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)`
			`#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)`

			`#endif /* __DOCKSTAR_H */`