u-boot/arch/arm/mach-exynos/include/mach/mipi_dsim.h

379 lines
12 KiB
C
Raw Normal View History

/*
* Copyright (C) 2012 Samsung Electronics
*
* Author: InKi Dae <inki.dae@samsung.com>
* Author: Donghwa Lee <dh09.lee@samsung.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _DSIM_H
#define _DSIM_H
#include <linux/list.h>
#include <linux/fb.h>
#include <lcd.h>
#define PANEL_NAME_SIZE (32)
enum mipi_dsim_interface_type {
DSIM_COMMAND,
DSIM_VIDEO
};
enum mipi_dsim_virtual_ch_no {
DSIM_VIRTUAL_CH_0,
DSIM_VIRTUAL_CH_1,
DSIM_VIRTUAL_CH_2,
DSIM_VIRTUAL_CH_3
};
enum mipi_dsim_burst_mode_type {
DSIM_NON_BURST_SYNC_EVENT,
DSIM_BURST_SYNC_EVENT,
DSIM_NON_BURST_SYNC_PULSE,
DSIM_BURST,
DSIM_NON_VIDEO_MODE
};
enum mipi_dsim_no_of_data_lane {
DSIM_DATA_LANE_1,
DSIM_DATA_LANE_2,
DSIM_DATA_LANE_3,
DSIM_DATA_LANE_4
};
enum mipi_dsim_byte_clk_src {
DSIM_PLL_OUT_DIV8,
DSIM_EXT_CLK_DIV8,
DSIM_EXT_CLK_BYPASS
};
enum mipi_dsim_pixel_format {
DSIM_CMD_3BPP,
DSIM_CMD_8BPP,
DSIM_CMD_12BPP,
DSIM_CMD_16BPP,
DSIM_VID_16BPP_565,
DSIM_VID_18BPP_666PACKED,
DSIM_18BPP_666LOOSELYPACKED,
DSIM_24BPP_888
};
/* MIPI DSI Processor-to-Peripheral transaction types */
enum {
MIPI_DSI_V_SYNC_START = 0x01,
MIPI_DSI_V_SYNC_END = 0x11,
MIPI_DSI_H_SYNC_START = 0x21,
MIPI_DSI_H_SYNC_END = 0x31,
MIPI_DSI_COLOR_MODE_OFF = 0x02,
MIPI_DSI_COLOR_MODE_ON = 0x12,
MIPI_DSI_SHUTDOWN_PERIPHERAL = 0x22,
MIPI_DSI_TURN_ON_PERIPHERAL = 0x32,
MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM = 0x03,
MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM = 0x13,
MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM = 0x23,
MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM = 0x04,
MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM = 0x14,
MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM = 0x24,
MIPI_DSI_DCS_SHORT_WRITE = 0x05,
MIPI_DSI_DCS_SHORT_WRITE_PARAM = 0x15,
MIPI_DSI_DCS_READ = 0x06,
MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE = 0x37,
MIPI_DSI_END_OF_TRANSMISSION = 0x08,
MIPI_DSI_NULL_PACKET = 0x09,
MIPI_DSI_BLANKING_PACKET = 0x19,
MIPI_DSI_GENERIC_LONG_WRITE = 0x29,
MIPI_DSI_DCS_LONG_WRITE = 0x39,
MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20 = 0x0c,
MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24 = 0x1c,
MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16 = 0x2c,
MIPI_DSI_PACKED_PIXEL_STREAM_30 = 0x0d,
MIPI_DSI_PACKED_PIXEL_STREAM_36 = 0x1d,
MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12 = 0x3d,
MIPI_DSI_PACKED_PIXEL_STREAM_16 = 0x0e,
MIPI_DSI_PACKED_PIXEL_STREAM_18 = 0x1e,
MIPI_DSI_PIXEL_STREAM_3BYTE_18 = 0x2e,
MIPI_DSI_PACKED_PIXEL_STREAM_24 = 0x3e,
};
/*
* struct mipi_dsim_config - interface for configuring mipi-dsi controller.
*
* @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
* @eot_disable: enable or disable EoT packet in HS mode.
* @auto_vertical_cnt: specifies auto vertical count mode.
* in Video mode, the vertical line transition uses line counter
* configured by VSA, VBP, and Vertical resolution.
* If this bit is set to '1', the line counter does not use VSA and VBP
* registers.(in command mode, this variable is ignored)
* @hse: set horizontal sync event mode.
* In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
* start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
* this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
* (in mommand mode, this variable is ignored)
* @hfp: specifies HFP disable mode.
* if this variable is set, DSI master ignores HFP area in VIDEO mode.
* (in command mode, this variable is ignored)
* @hbp: specifies HBP disable mode.
* if this variable is set, DSI master ignores HBP area in VIDEO mode.
* (in command mode, this variable is ignored)
* @hsa: specifies HSA disable mode.
* if this variable is set, DSI master ignores HSA area in VIDEO mode.
* (in command mode, this variable is ignored)
* @e_interface: specifies interface to be used.(CPU or RGB interface)
* @e_virtual_ch: specifies virtual channel number that main or
* sub diaplsy uses.
* @e_pixel_format: specifies pixel stream format for main or sub display.
* @e_burst_mode: selects Burst mode in Video mode.
* in Non-burst mode, RGB data area is filled with RGB data and NULL
* packets, according to input bandwidth of RGB interface.
* In Burst mode, RGB data area is filled with RGB data only.
* @e_no_data_lane: specifies data lane count to be used by Master.
* @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
* DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
* @pll_stable_time: specifies the PLL Timer for stability of the ganerated
* clock(System clock cycle base)
* if the timer value goes to 0x00000000, the clock stable bit of status
* and interrupt register is set.
* @esc_clk: specifies escape clock frequency for getting the escape clock
* prescaler value.
* @stop_holding_cnt: specifies the interval value between transmitting
* read packet(or write "set_tear_on" command) and BTA request.
* after transmitting read packet or write "set_tear_on" command,
* BTA requests to D-PHY automatically. this counter value specifies
* the interval between them.
* @bta_timeout: specifies the timer for BTA.
* this register specifies time out from BTA request to change
* the direction with respect to Tx escape clock.
* @rx_timeout: specifies the timer for LP Rx mode timeout.
* this register specifies time out on how long RxValid deasserts,
* after RxLpdt asserts with respect to Tx escape clock.
* - RxValid specifies Rx data valid indicator.
* - RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
* - RxValid and RxLpdt specifies signal from D-PHY.
*/
struct mipi_dsim_config {
unsigned char auto_flush;
unsigned char eot_disable;
unsigned char auto_vertical_cnt;
unsigned char hse;
unsigned char hfp;
unsigned char hbp;
unsigned char hsa;
enum mipi_dsim_interface_type e_interface;
enum mipi_dsim_virtual_ch_no e_virtual_ch;
enum mipi_dsim_pixel_format e_pixel_format;
enum mipi_dsim_burst_mode_type e_burst_mode;
enum mipi_dsim_no_of_data_lane e_no_data_lane;
enum mipi_dsim_byte_clk_src e_byte_clk;
/*
* ===========================================
* | P | M | S | MHz |
* -------------------------------------------
* | 3 | 100 | 3 | 100 |
* | 3 | 100 | 2 | 200 |
* | 3 | 63 | 1 | 252 |
* | 4 | 100 | 1 | 300 |
* | 4 | 110 | 1 | 330 |
* | 12 | 350 | 1 | 350 |
* | 3 | 100 | 1 | 400 |
* | 4 | 150 | 1 | 450 |
* | 6 | 118 | 1 | 472 |
* | 3 | 120 | 1 | 480 |
* | 12 | 250 | 0 | 500 |
* | 4 | 100 | 0 | 600 |
* | 3 | 81 | 0 | 648 |
* | 3 | 88 | 0 | 704 |
* | 3 | 90 | 0 | 720 |
* | 3 | 100 | 0 | 800 |
* | 12 | 425 | 0 | 850 |
* | 4 | 150 | 0 | 900 |
* | 12 | 475 | 0 | 950 |
* | 6 | 250 | 0 | 1000 |
* -------------------------------------------
*/
/*
* pms could be calculated as the following.
* M * 24 / P * 2 ^ S = MHz
*/
unsigned char p;
unsigned short m;
unsigned char s;
unsigned int pll_stable_time;
unsigned long esc_clk;
unsigned short stop_holding_cnt;
unsigned char bta_timeout;
unsigned short rx_timeout;
};
/*
* struct mipi_dsim_device - global interface for mipi-dsi driver.
*
* @dsim_config: infomation for configuring mipi-dsi controller.
* @master_ops: callbacks to mipi-dsi operations.
* @dsim_lcd_dev: pointer to activated ddi device.
* (it would be registered by mipi-dsi driver.)
* @dsim_lcd_drv: pointer to activated_ddi driver.
* (it would be registered by mipi-dsi driver.)
* @state: specifies status of MIPI-DSI controller.
* the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
* @data_lane: specifiec enabled data lane number.
* this variable would be set by driver according to e_no_data_lane
* automatically.
* @e_clk_src: select byte clock source.
* @pd: pointer to MIPI-DSI driver platform data.
*/
struct mipi_dsim_device {
struct mipi_dsim_config *dsim_config;
struct mipi_dsim_master_ops *master_ops;
struct mipi_dsim_lcd_device *dsim_lcd_dev;
struct mipi_dsim_lcd_driver *dsim_lcd_drv;
unsigned int state;
unsigned int data_lane;
enum mipi_dsim_byte_clk_src e_clk_src;
struct exynos_platform_mipi_dsim *pd;
};
/*
* struct exynos_platform_mipi_dsim - interface to platform data
* for mipi-dsi driver.
*
* @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
* lcd panel driver searched would be actived.
* @dsim_config: pointer of structure for configuring mipi-dsi controller.
* @lcd_panel_info: pointer for lcd panel specific structure.
* this structure specifies width, height, timing and polarity and so on.
* @lcd_power: callback pointer for enabling or disabling lcd power.
* @mipi_power: callback pointer for enabling or disabling mipi power.
* @phy_enable: pointer to a callback controlling D-PHY enable/reset
*/
struct exynos_platform_mipi_dsim {
char lcd_panel_name[PANEL_NAME_SIZE];
struct mipi_dsim_config *dsim_config;
void *lcd_panel_info;
int (*lcd_power)(void);
int (*mipi_power)(void);
void (*phy_enable)(unsigned int dev_index, unsigned int enable);
};
/*
* struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
*
* @cmd_write: transfer command to lcd panel at LP mode.
* @cmd_read: read command from rx register.
* @get_dsim_frame_done: get the status that all screen data have been
* transferred to mipi-dsi.
* @clear_dsim_frame_done: clear frame done status.
* @get_fb_frame_done: get frame done status of display controller.
* @trigger: trigger display controller.
* - this one would be used only in case of CPU mode.
*/
struct mipi_dsim_master_ops {
int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
const unsigned char *data0, unsigned int data1);
int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
unsigned int data0, unsigned int data1);
int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
int (*get_fb_frame_done)(void);
void (*trigger)(struct fb_info *info);
};
/*
* device structure for mipi-dsi based lcd panel.
*
* @name: name of the device to use with this device, or an
* alias for that name.
* @id: id of device to be registered.
* @bus_id: bus id for identifing connected bus
* and this bus id should be same as id of mipi_dsim_device.
* @master: pointer to mipi-dsi master device object.
* @platform_data: lcd panel specific platform data.
*/
struct mipi_dsim_lcd_device {
char *name;
int id;
int bus_id;
int reverse_panel;
struct mipi_dsim_device *master;
void *platform_data;
};
/*
* driver structure for mipi-dsi based lcd panel.
*
* this structure should be registered by lcd panel driver.
* mipi-dsi driver seeks lcd panel registered through name field
* and calls these callback functions in appropriate time.
*
* @name: name of the driver to use with this device, or an
* alias for that name.
* @id: id of driver to be registered.
* this id would be used for finding device object registered.
* @mipi_panel_init: callback pointer for initializing lcd panel based on mipi
* dsi interface.
* @mipi_display_on: callback pointer for lcd panel display on.
*/
struct mipi_dsim_lcd_driver {
char *name;
int id;
int (*mipi_panel_init)(struct mipi_dsim_device *dsim_dev);
void (*mipi_display_on)(struct mipi_dsim_device *dsim_dev);
};
#ifdef CONFIG_EXYNOS_MIPI_DSIM
int exynos_mipi_dsi_init(void);
#else
static inline int exynos_mipi_dsi_init(void)
{
return 0;
}
#endif
/*
* register mipi_dsim_lcd_driver object defined by lcd panel driver
* to mipi-dsi driver.
*/
int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
*lcd_drv);
/*
* register mipi_dsim_lcd_device to mipi-dsi master.
*/
int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
*lcd_dev);
void exynos_set_dsim_platform_data(struct exynos_platform_mipi_dsim *pd);
void exynos_init_dsim_platform_data(vidinfo_t *vid);
/* panel driver init based on mipi dsi interface */
void s6e8ax0_init(void);
extern int mipi_power(void);
#endif /* _DSIM_H */