u-boot/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2022 Marek Vasut <marex@denx.de>
 */

#include <common.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <dm.h>
#include <env.h>
#include <env_internal.h>
#include <i2c_eeprom.h>
#include <malloc.h>
#include <net.h>
#include <miiphy.h>

#include "lpddr4_timing.h"
#include "../common/dh_common.h"
#include "../common/dh_imx.h"

DECLARE_GLOBAL_DATA_PTR;

int mach_cpu_init(void)
{
	icache_enable();
	return 0;
}

int board_phys_sdram_size(phys_size_t *size)
{
	const u16 memsz[] = { 512, 1024, 1536, 2048, 3072, 4096, 6144, 8192 };
	u8 memcfg = dh_get_memcfg();

	*size = (u64)memsz[memcfg] << 20ULL;

	return 0;
}

static void setup_eqos(void)
{
	struct iomuxc_gpr_base_regs *gpr =
		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;

	/* Set INTF as RGMII, enable RGMII TXC clock. */
	clrsetbits_le32(&gpr->gpr[1],
			IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16));
	setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21));

	set_clk_eqos(ENET_125MHZ);
}

static void setup_fec(void)
{
	struct iomuxc_gpr_base_regs *gpr =
		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;

	/* Enable RGMII TX clk output. */
	setbits_le32(&gpr->gpr[1], BIT(22));

	set_clk_enet(ENET_125MHZ);
}

static int dh_imx8_setup_ethaddr(void)
{
	unsigned char enetaddr[6];

	if (dh_mac_is_in_env("ethaddr"))
		return 0;

	if (!dh_imx_get_mac_from_fuse(enetaddr))
		goto out;

	if (!dh_get_mac_from_eeprom(enetaddr, "eeprom0"))
		goto out;

	return -ENXIO;

out:
	return eth_env_set_enetaddr("ethaddr", enetaddr);
}

static int dh_imx8_setup_eth1addr(void)
{
	unsigned char enetaddr[6];

	if (dh_mac_is_in_env("eth1addr"))
		return 0;

	if (!dh_imx_get_mac_from_fuse(enetaddr))
		goto increment_out;

	if (!dh_get_mac_from_eeprom(enetaddr, "eeprom1"))
		goto out;

	/*
	 * Populate second ethernet MAC from first ethernet EEPROM with MAC
	 * address LSByte incremented by 1. This is only used on SoMs without
	 * second ethernet EEPROM, i.e. early prototypes.
	 */
	if (!dh_get_mac_from_eeprom(enetaddr, "eeprom0"))
		goto increment_out;

	return -ENXIO;

increment_out:
	enetaddr[5]++;

out:
	return eth_env_set_enetaddr("eth1addr", enetaddr);
}

int dh_setup_mac_address(void)
{
	int ret;

	ret = dh_imx8_setup_ethaddr();
	if (ret)
		printf("%s: Unable to setup ethaddr! ret = %d\n", __func__, ret);

	ret = dh_imx8_setup_eth1addr();
	if (ret)
		printf("%s: Unable to setup eth1addr! ret = %d\n", __func__, ret);

	return ret;
}

int board_init(void)
{
	setup_eqos();
	setup_fec();
	return 0;
}

int board_late_init(void)
{
	dh_setup_mac_address();
	return 0;
}

enum env_location env_get_location(enum env_operation op, int prio)
{
	return prio ? ENVL_UNKNOWN : ENVL_SPI_FLASH;
}