Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 10:18:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/zynqmp-p-a2197-00-revA.dts

583 lines
18 KiB
Text
Raw Normal View History

arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* dts file for Xilinx Versal a2197 RevA System Controller
*
* (C) Copyright 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
/dts-v1/;
#include "zynqmp.dtsi"
#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/gpio/gpio.h>
arm64: zynqmp: Add psgtr DT descriptions Mainline kernel has psgtr driver that's why it is good to add description to DT files. Some boards are just missing description for USB3 and sata. zc1751-dc1 and p-a2197 are also missing clock descriptions for input clocks. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-10 12:55:34 +00:00
#include <dt-bindings/phy/phy.h>
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
/ {
model = "Versal System Controller on a2197 Processor Char board RevA"; /* Tenzing */
arm64: zynqmp: Sync names for SC with Versal ZynqMP based System controller is present on Versal boards. This patch is aligning names with Versal to follow the spec. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-28 11:16:10 +00:00
compatible = "xlnx,zynqmp-p-a2197-00-revA", "xlnx,zynqmp-a2197-revA",
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
"xlnx,zynqmp-a2197", "xlnx,zynqmp";
aliases {
ethernet0 = &gem0;
i2c0 = &i2c0;
i2c1 = &i2c1;
mmc0 = &sdhci0;
mmc1 = &sdhci1;
xilinx: Convert xlnx,eeprom property to nvmem alias Convert all boards to use nvmem alias instead of xlnx,eeprom. The change is done based on discussion in the link below. Link: https://lore.kernel.org/r/CAL_JsqLMDqpkyg-Q7mUfw-XH67-v068Q6e9wTq2UOoN=0-_coQ@mail.gmail.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-03 09:46:50 +00:00
nvmem0 = &eeprom;
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
rtc0 = &rtc;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &dcc;
usb0 = &usb0;
usb1 = &usb1;
};
chosen {
bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
arm64: zynqmp: Remove fixme about memory size on zynqmp-p-a2197 System controller has 2GB of memory and fixme can be removed now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 08:35:03 +00:00
reg = <0x0 0x0 0x0 0x80000000>;
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
};
arm64: zynqmp: Add psgtr DT descriptions Mainline kernel has psgtr driver that's why it is good to add description to DT files. Some boards are just missing description for USB3 and sata. zc1751-dc1 and p-a2197 are also missing clock descriptions for input clocks. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-10 12:55:34 +00:00
si5332_1: si5332_1 { /* clk0_sgmii - u142 */
compatible = "fixed-clock";
#clock-cells = <0>;
arm64: zynqmp: Fix sgmii clock input freq for p-a2197 Input frequency for sgmii is 125MHz on all Xilinx designs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/87153c59cc526f5955b3bff3db11027b5848c042.1634302099.git.michal.simek@xilinx.com
2021-10-15 12:48:20 +00:00
clock-frequency = <125000000>;
arm64: zynqmp: Add psgtr DT descriptions Mainline kernel has psgtr driver that's why it is good to add description to DT files. Some boards are just missing description for USB3 and sata. zc1751-dc1 and p-a2197 are also missing clock descriptions for input clocks. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-10 12:55:34 +00:00
};
si5332_2: si5332_2 { /* clk1_usb - u142 */
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
};
&sdhci0 { /* emmc MIO 13-23 - with some settings 16GB */
status = "okay";
non-removable;
disable-wp;
bus-width = <8>;
xilinx: Fix xlnx,mio_bank property s/xlnx,mio_bank/xlnx,mio-bank/g DT binding is describing mio-bank not mio_bank that's why fix all DTSes and also driver itself. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-07-22 15:42:43 +00:00
xlnx,mio-bank = <0>;
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
};
&uart0 { /* uart0 MIO38-39 */
status = "okay";
};
&uart1 { /* uart1 MIO40-41 */
status = "okay";
};
&sdhci1 { /* sd1 MIO45-51 cd in place */
status = "okay";
no-1-8-v;
disable-wp;
xilinx: Fix xlnx,mio_bank property s/xlnx,mio_bank/xlnx,mio-bank/g DT binding is describing mio-bank not mio_bank that's why fix all DTSes and also driver itself. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-07-22 15:42:43 +00:00
xlnx,mio-bank = <1>;
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
};
arm64: zynqmp: Add psgtr DT descriptions Mainline kernel has psgtr driver that's why it is good to add description to DT files. Some boards are just missing description for USB3 and sata. zc1751-dc1 and p-a2197 are also missing clock descriptions for input clocks. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-10 12:55:34 +00:00
&psgtr {
status = "okay";
/* sgmii, usb3 */
clocks = <&si5332_1>, <&si5332_2>;
clock-names = "ref0", "ref1";
};
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
&gem0 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "sgmii"; /* DTG generates this properly 1512 */
is-internal-pcspma;
/* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */
arm64: zynqmp: Use ethernet-phy as node name for ethernet phys Ethernet phys based on devicetree specification should be using ethernet-phy@ node name instead of pure phy@. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-08-08 10:44:22 +00:00
phy0: ethernet-phy@0 {
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
reg = <0>;
};
};
&gpio {
status = "okay";
gpio-line-names = "", "", "", "", "", /* 0 - 4 */
"", "", "DC_SYS_CTRL0", "DC_SYS_CTRL1", "DC_SYS_CTRL2", /* 5 - 9 */
"DC_SYS_CTRL3", "DC_SYS_CTRL4", "DC_SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
"EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
"EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */
"", "", "", "", "", /* 25 - 29 */
"", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */
"LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */
"UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */
"SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */
"SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */
"USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */
"USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */
"USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */
"USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */
"USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */
"SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */
"SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */
"SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */
"SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */
"SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */
"VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */
"SYSCTLR_VCC_RAM_EN", "SYSCTLR_VCC_PSLP_EN", "SYSCTLR_VCC_PSFP_EN", "SYSCTLR_VCCAUX_EN", "SYSCTLR_VCCAUX_PMC_EN", /* 105 - 109 */
"SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */
"SYSCTLR_VCC3V3_EN", "SYSCTLR_VCC1V2_DDR4_EN", "SYSCTLR_VCC1V1_LP4_EN", "SYSCTLR_VDD1_1V8_LP4_EN", "SYSCTLR_VADJ_FMC_EN", /* 115 - 119 */
"SYSCTLR_MGTYAVCC_EN", "SYSCTLR_MGTYAVTT_EN", "SYSCTLR_MGTYVCCAUX_EN", "SYSCTLR_UTIL_1V13_EN", "SYSCTLR_UTIL_1V8_EN", /* 120 - 124 */
"SYSCTLR_UTIL_2V5_EN", "FMCP1_FMC_PRSNT_M2C_B", "FMCP2_FMC_PRSNT_M2C_B", "FMCP1_FMCP_PRSNT_M2C_B", "FMCP2_FMCP_PRSNT_M2C_B", /* 125 - 129 */
"PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "SYSCTLR_USBC_SBU1", "SYSCTLR_USBC_SBU2", "TI_CABLE1", /* 130 - 134 */
"TI_CABLE2", "SYSCTLR_MIC2005_EN_B", "SYSCTLR_MIC2005_FAULT_B", "SYSCTLR_TUSB320_INT_B", "SYSCTLR_TUSB320_ID", /* 135 - 139 */
"PMBUS1_ALERT", "PMBUS2_ALERT", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */
"MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */
"", "", "", "", "", /* 150 - 154 */
"", "", "", "", "", /* 155 - 159 */
"", "", "", "", "", /* 160 - 164 */
"", "", "", "", "", /* 165 - 169 */
"", "", "", ""; /* 170 - 174 */
};
&i2c0 { /* MIO 34-35 - can't stay here */
status = "okay";
clock-frequency = <400000>;
i2c-mux@74 { /* u33 */
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x74>;
/* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */
i2c@0 { /* PMBUS1 */
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/* On connector J98 */
reg_vcc_fmc: tps544@7 { /* u80 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x7>;
regulator-name = "reg_vcc_fmc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2600000>;
/* enable-gpio = <&gpio0 23 0x4>; optional */
};
reg_vcc_ram: tps544@8 { /* u83 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x8>;
};
reg_vcc_pslp: tps544@9 { /* u85 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x9>;
};
reg_vcc_psfp: tps544@a { /* u86 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0xa>;
};
arm64: zynqmp: Fix i2c address of u70 on p-a2197-00 board tps53681 is i2c address 0x60 not 0xc0. Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-24 09:28:52 +00:00
reg_vccint: tps53681@60 { /* u70 - FIXME name - don't know what it does - also vcc_io_soc */
arm64: zynqmp: Added new tps53679 compatible string for a2197-0x boards Added tps53679 compatible string to tps53681. They are both compatible to each other and tps53679 has Linux driver already. Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-24 09:28:52 +00:00
compatible = "ti,tps53681", "ti,tps53679";
arm64: zynqmp: Fix i2c address of u70 on p-a2197-00 board tps53681 is i2c address 0x60 not 0xc0. Signed-off-by: Nishant Mittal <nishant.mittal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-24 09:28:52 +00:00
reg = <0x60>;
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
/* vccint, vcc_io_soc */
};
};
i2c@1 { /* PMBUS1_INA226 */
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
arm64: zynqmp: Fix typo in zynqmp-p-a2197-00-revA Trivial fix but not detected by checkpatch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-14 08:27:42 +00:00
/* FIXME check alerts coming to SC */
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
vcc_fmc: ina226@42 { /* u81 */
compatible = "ti,ina226";
reg = <0x42>;
shunt-resistor = <5000>;
};
vcc_ram: ina226@43 { /* u82 */
compatible = "ti,ina226";
reg = <0x43>;
shunt-resistor = <5000>;
};
vcc_pslp: ina226@44 { /* u84 */
compatible = "ti,ina226";
reg = <0x44>;
shunt-resistor = <5000>;
};
vcc_psfp: ina226@45 { /* u87 */
compatible = "ti,ina226";
reg = <0x45>;
shunt-resistor = <5000>;
};
};
i2c@2 { /* PMBUS2 */
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* On connector J104 */
reg_vccaus: tps544@d { /* u88 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0xd>;
};
reg_vccaux_fmc: tps544@e { /* u90 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0xe>;
};
reg_vcco_500: tps544@f { /* u93 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0xf>;
};
reg_vcco_501: tps544@10 { /* u95 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x10>;
};
reg_vcco_502: tps544@11 { /* u97 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x11>;
};
reg_vcco_503: tps544@12 { /* u99 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x12>;
};
reg_vcc1v8: tps544@13 { /* u101 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x13>;
};
reg_vcc3v3: tps544@14 { /* u102 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x14>;
};
reg_vcc1v2_ddr4: tps544@15 { /* u104 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x15>;
};
reg_vcc1v1_lp4: tps544@16 { /* u106 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x16>;
};
reg_vcc1_1V8_lp4: tps544@17 { /* u108 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x17>;
};
reg_vadj_fmc: tps544@19 { /* u109 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x19>;
};
reg_mgtyavcc: tps544@1a { /* u111 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x1a>;
};
reg_mgtyavtt: tps544@1b { /* u114 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x1b>;
};
reg_mgtyvccaux: tps544@1c { /* u115 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x1c>;
};
reg_util_1v13: tps544@1d { /* u117 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x1d>;
};
reg_util_1v8: tps544@1e { /* u118 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x1e>;
};
reg_util_2v5: tps544@1f { /* u119 - FIXME name - don't know what it does */
compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */
reg = <0x1f>;
};
};
i2c@3 { /* PMBUS2_INA226 */
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
/* FIXME check alerts coming to SC */
vccaux: ina226@40 { /* u89 */
compatible = "ti,ina226";
reg = <0x40>;
shunt-resistor = <5000>;
};
vccaux_fmc: ina226@41 { /* u91 */
compatible = "ti,ina226";
reg = <0x41>;
shunt-resistor = <5000>;
};
vcco_500: ina226@42 { /* u92 */
compatible = "ti,ina226";
reg = <0x42>;
shunt-resistor = <5000>;
};
vcco_501: ina226@43 { /* u94 */
compatible = "ti,ina226";
reg = <0x43>;
shunt-resistor = <5000>;
};
vcco_502: ina226@44 { /* u96 */
compatible = "ti,ina226";
reg = <0x44>;
shunt-resistor = <5000>;
};
vcco_503: ina226@45 { /* u98 */
compatible = "ti,ina226";
reg = <0x45>;
shunt-resistor = <5000>;
};
vcc_1v8: ina226@46 { /* u100 */
compatible = "ti,ina226";
reg = <0x46>;
shunt-resistor = <5000>;
};
vcc_3v3: ina226@47 { /* u103 */
compatible = "ti,ina226";
reg = <0x47>;
shunt-resistor = <5000>;
};
vcc_1v2_ddr4: ina226@48 { /* u105 */
compatible = "ti,ina226";
reg = <0x48>;
shunt-resistor = <1000>;
};
vcc1v1_lp4: ina226@49 { /* u107 */
compatible = "ti,ina226";
reg = <0x49>;
shunt-resistor = <5000>;
};
vadj_fmc: ina226@4a { /* u110 */
compatible = "ti,ina226";
reg = <0x4a>;
shunt-resistor = <5000>;
};
mgtyavcc: ina226@4b { /* u112 */
compatible = "ti,ina226";
reg = <0x4b>;
shunt-resistor = <1000>;
};
mgtyavtt: ina226@4c { /* u113 */
compatible = "ti,ina226";
reg = <0x4c>;
shunt-resistor = <1000>;
};
mgtyvccaux: ina226@4d { /* u116 */
compatible = "ti,ina226";
reg = <0x4d>;
shunt-resistor = <5000>;
};
vcc_bat: ina226@4e { /* u12 */
compatible = "ti,ina226";
reg = <0x4e>;
shunt-resistor = <10000000>; /* 10 ohm */
};
};
i2c@4 { /* LP_I2C_SM */
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
/* connected to J212G */
/* zynqmp sm alert or samtec J212H */
};
/* 5-7 unused */
};
};
&i2c1 { /* i2c1 MIO 36-37 */
status = "okay";
clock-frequency = <400000>;
/* Must be enabled via J242 */
eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */
compatible = "atmel,24c02";
reg = <0x51>;
};
i2c-mux@74 { /* u35 */
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x74>;
/* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */
dc_i2c: i2c@0 { /* DC_I2C */
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
/* Use for storing information about SC board */
eeprom: eeprom@54 { /* u34 - m24128 16kB */
compatible = "st,24c128", "atmel,24c128";
reg = <0x54>;
};
si570_ref_clk: clock-generator@5d { /* u32 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x5d>; /* 570JAC000900DG */
temperature-stability = <50>;
arm64: zynqmp: Sync si570 setup and clock names Setup proper si570 names and default factory setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-25 06:55:52 +00:00
factory-fout = <33333333>;
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
clock-frequency = <33333333>;
arm64: zynqmp: Sync si570 setup and clock names Setup proper si570 names and default factory setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-25 06:55:52 +00:00
clock-output-names = "ref_clk";
arm64: zynqmp: Add missing silabs,skip-recall for si570 ref clk nodes All si570 which are used for ps reference clock generation should contain silabs,skip-recall property not to cause break on ps clock. On Versal boards this will cause hang on Versal cpu when it is booted at the same time with SC. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-09 11:43:42 +00:00
silabs,skip-recall;
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
};
/* Connection via Samtec J212D */
/* Use for storing information about X-PRC card */
x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */
compatible = "atmel,24c02";
reg = <0x52>;
};
/* Use for setting up certain features on X-PRC card */
x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */
compatible = "nxp,pca9534";
reg = <0x22>;
gpio-controller; /* IRQ not connected */
#gpio-cells = <2>;
gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4",
"", "", "", "";
gtr_sel0 {
gpio-hog;
gpios = <0 0>;
input; /* FIXME add meaning */
line-name = "sw4_1";
};
gtr_sel1 {
gpio-hog;
gpios = <1 0>;
input; /* FIXME add meaning */
line-name = "sw4_2";
};
gtr_sel2 {
gpio-hog;
gpios = <2 0>;
input; /* FIXME add meaning */
line-name = "sw4_3";
};
gtr_sel3 {
gpio-hog;
gpios = <3 0>;
input; /* FIXME add meaning */
line-name = "sw4_4";
};
};
};
i2c@1 { /* FMCP1_IIC */
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
/* FIXME connection to Samtec J51C */
/* expected eeprom 0x50 SE cards */
};
i2c@2 { /* FMCP2_IIC */
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
/* FIXME connection to Samtec J53C */
/* expected eeprom 0x50 SE cards */
};
i2c@3 { /* DDR4_DIMM1 */
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
si570_ddr_dimm1: clock-generator@60 { /* u2 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x60>; /* 570BAB000299DG */
temperature-stability = <50>;
arm64: zynqmp: Sync si570 setup and clock names Setup proper si570 names and default factory setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-25 06:55:52 +00:00
factory-fout = <200000000>;
clock-frequency = <200000000>;
clock-output-names = "si570_ddrdimm1_clk";
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
};
/* 0x50 SPD? */
};
i2c@4 { /* DDR4_DIMM2 */
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
si570_ddr_dimm2: clock-generator@60 { /* u3 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x60>; /* 570BAB000299DG */
temperature-stability = <50>;
arm64: zynqmp: Sync si570 setup and clock names Setup proper si570 names and default factory setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-25 06:55:52 +00:00
factory-fout = <200000000>;
clock-frequency = <200000000>;
clock-output-names = "si570_ddrdimm2_clk";
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
};
/* 0x50 SPD? */
};
i2c@5 { /* LPDDR4_SI570_CLK */
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
si570_lpddr4: clock-generator@60 { /* u4 */
#clock-cells = <0>;
compatible = "silabs,si570";
reg = <0x60>; /* 570BAB000299DG */
temperature-stability = <50>;
arm64: zynqmp: Sync si570 setup and clock names Setup proper si570 names and default factory setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-25 06:55:52 +00:00
factory-fout = <200000000>;
clock-frequency = <200000000>;
clock-output-names = "si570_lpddr4_clk";
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
};
};
i2c@6 { /* HSDP_SI570 */
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
arm64: zynqmp: Fix i2c addresses for zynqmp-p-a2197 After double checking some i2c addresses are not correct. It is visible from i2c dump ZynqMP> i2c bus Bus 3: i2c@ff020000 74: i2c-mux@74, offset len 1, flags 0 Bus 5: i2c@ff020000->i2c-mux@74->i2c@0 Bus 6: i2c@ff020000->i2c-mux@74->i2c@2 Bus 7: i2c@ff020000->i2c-mux@74->i2c@1 Bus 8: i2c@ff020000->i2c-mux@74->i2c@3 Bus 4: i2c@ff030000 (active 4) 74: i2c-mux@74, offset len 1, flags 0 Bus 9: i2c@ff030000->i2c-mux@74->i2c@0 Bus 10: i2c@ff030000->i2c-mux@74->i2c@3 Bus 11: i2c@ff030000->i2c-mux@74->i2c@4 Bus 12: i2c@ff030000->i2c-mux@74->i2c@5 (active 12) 51: generic_51, offset len 1, flags 0 60: generic_60, offset len 1, flags 0 74: generic_74, offset len 1, flags 0 Bus 13: i2c@ff030000->i2c-mux@74->i2c@6 (active 13) 51: generic_51, offset len 1, flags 0 5d: generic_5d, offset len 1, flags 0 74: generic_74, offset len 1, flags 0 ZynqMP> i2c dev 4 Setting bus to 4 ZynqMP> i2c mw 74 0 18 ZynqMP> i2c probe Valid chip addresses: 18 36 37 50 51 60 74 ZynqMP> i2c mw 74 0 20 ZynqMP> i2c probe Valid chip addresses: 51 60 74 where it is clear that si570 (u5) is at 0x60 address and 8t49n240 (u39) is also at address 0x60 based on log above. i2c address 0x74 is i2c mux and 0x51 is eeprom. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/0a198e9d993411e41473d130d5a5c20b6dc83458.1646639616.git.michal.simek@xilinx.com
2022-03-07 07:53:38 +00:00
si570_hsdp: clock-generator@60 { /* u5 */
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
#clock-cells = <0>;
compatible = "silabs,si570";
arm64: zynqmp: Fix i2c addresses for zynqmp-p-a2197 After double checking some i2c addresses are not correct. It is visible from i2c dump ZynqMP> i2c bus Bus 3: i2c@ff020000 74: i2c-mux@74, offset len 1, flags 0 Bus 5: i2c@ff020000->i2c-mux@74->i2c@0 Bus 6: i2c@ff020000->i2c-mux@74->i2c@2 Bus 7: i2c@ff020000->i2c-mux@74->i2c@1 Bus 8: i2c@ff020000->i2c-mux@74->i2c@3 Bus 4: i2c@ff030000 (active 4) 74: i2c-mux@74, offset len 1, flags 0 Bus 9: i2c@ff030000->i2c-mux@74->i2c@0 Bus 10: i2c@ff030000->i2c-mux@74->i2c@3 Bus 11: i2c@ff030000->i2c-mux@74->i2c@4 Bus 12: i2c@ff030000->i2c-mux@74->i2c@5 (active 12) 51: generic_51, offset len 1, flags 0 60: generic_60, offset len 1, flags 0 74: generic_74, offset len 1, flags 0 Bus 13: i2c@ff030000->i2c-mux@74->i2c@6 (active 13) 51: generic_51, offset len 1, flags 0 5d: generic_5d, offset len 1, flags 0 74: generic_74, offset len 1, flags 0 ZynqMP> i2c dev 4 Setting bus to 4 ZynqMP> i2c mw 74 0 18 ZynqMP> i2c probe Valid chip addresses: 18 36 37 50 51 60 74 ZynqMP> i2c mw 74 0 20 ZynqMP> i2c probe Valid chip addresses: 51 60 74 where it is clear that si570 (u5) is at 0x60 address and 8t49n240 (u39) is also at address 0x60 based on log above. i2c address 0x74 is i2c mux and 0x51 is eeprom. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/0a198e9d993411e41473d130d5a5c20b6dc83458.1646639616.git.michal.simek@xilinx.com
2022-03-07 07:53:38 +00:00
reg = <0x60>; /* 570JAC000900DG */
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
temperature-stability = <50>;
arm64: zynqmp: Sync si570 setup and clock names Setup proper si570 names and default factory setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-06-25 06:55:52 +00:00
factory-fout = <156250000>;
clock-frequency = <156250000>;
clock-output-names = "si570_hsdp_clk";
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
};
};
i2c@7 { /* PCIE_CLK */
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
/* u36 0xd8 or 0xde - pcie clk buf - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */
/* u37 0xd0 DNP - pcie clocking 1 - 9FGV1006BQ505LTGI - PCIe GEN 4 CLOCK GENERATOR FIXME - no linux driver */
/* u38 0xca - pcie clocking 2 - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */
arm64: zynqmp: Fix i2c addresses for zynqmp-p-a2197 After double checking some i2c addresses are not correct. It is visible from i2c dump ZynqMP> i2c bus Bus 3: i2c@ff020000 74: i2c-mux@74, offset len 1, flags 0 Bus 5: i2c@ff020000->i2c-mux@74->i2c@0 Bus 6: i2c@ff020000->i2c-mux@74->i2c@2 Bus 7: i2c@ff020000->i2c-mux@74->i2c@1 Bus 8: i2c@ff020000->i2c-mux@74->i2c@3 Bus 4: i2c@ff030000 (active 4) 74: i2c-mux@74, offset len 1, flags 0 Bus 9: i2c@ff030000->i2c-mux@74->i2c@0 Bus 10: i2c@ff030000->i2c-mux@74->i2c@3 Bus 11: i2c@ff030000->i2c-mux@74->i2c@4 Bus 12: i2c@ff030000->i2c-mux@74->i2c@5 (active 12) 51: generic_51, offset len 1, flags 0 60: generic_60, offset len 1, flags 0 74: generic_74, offset len 1, flags 0 Bus 13: i2c@ff030000->i2c-mux@74->i2c@6 (active 13) 51: generic_51, offset len 1, flags 0 5d: generic_5d, offset len 1, flags 0 74: generic_74, offset len 1, flags 0 ZynqMP> i2c dev 4 Setting bus to 4 ZynqMP> i2c mw 74 0 18 ZynqMP> i2c probe Valid chip addresses: 18 36 37 50 51 60 74 ZynqMP> i2c mw 74 0 20 ZynqMP> i2c probe Valid chip addresses: 51 60 74 where it is clear that si570 (u5) is at 0x60 address and 8t49n240 (u39) is also at address 0x60 based on log above. i2c address 0x74 is i2c mux and 0x51 is eeprom. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/0a198e9d993411e41473d130d5a5c20b6dc83458.1646639616.git.michal.simek@xilinx.com
2022-03-07 07:53:38 +00:00
clock_8t49n287: clock-generator@60 { /* u39 8T49N240 - pcie clocking 3 */
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
#clock-cells = <1>; /* author David Cater <david.cater@idt.com>*/
compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */
arm64: zynqmp: Fix i2c addresses for zynqmp-p-a2197 After double checking some i2c addresses are not correct. It is visible from i2c dump ZynqMP> i2c bus Bus 3: i2c@ff020000 74: i2c-mux@74, offset len 1, flags 0 Bus 5: i2c@ff020000->i2c-mux@74->i2c@0 Bus 6: i2c@ff020000->i2c-mux@74->i2c@2 Bus 7: i2c@ff020000->i2c-mux@74->i2c@1 Bus 8: i2c@ff020000->i2c-mux@74->i2c@3 Bus 4: i2c@ff030000 (active 4) 74: i2c-mux@74, offset len 1, flags 0 Bus 9: i2c@ff030000->i2c-mux@74->i2c@0 Bus 10: i2c@ff030000->i2c-mux@74->i2c@3 Bus 11: i2c@ff030000->i2c-mux@74->i2c@4 Bus 12: i2c@ff030000->i2c-mux@74->i2c@5 (active 12) 51: generic_51, offset len 1, flags 0 60: generic_60, offset len 1, flags 0 74: generic_74, offset len 1, flags 0 Bus 13: i2c@ff030000->i2c-mux@74->i2c@6 (active 13) 51: generic_51, offset len 1, flags 0 5d: generic_5d, offset len 1, flags 0 74: generic_74, offset len 1, flags 0 ZynqMP> i2c dev 4 Setting bus to 4 ZynqMP> i2c mw 74 0 18 ZynqMP> i2c probe Valid chip addresses: 18 36 37 50 51 60 74 ZynqMP> i2c mw 74 0 20 ZynqMP> i2c probe Valid chip addresses: 51 60 74 where it is clear that si570 (u5) is at 0x60 address and 8t49n240 (u39) is also at address 0x60 based on log above. i2c address 0x74 is i2c mux and 0x51 is eeprom. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/0a198e9d993411e41473d130d5a5c20b6dc83458.1646639616.git.michal.simek@xilinx.com
2022-03-07 07:53:38 +00:00
reg = <0x60>;
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
/* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */
/* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */
};
};
};
};
&usb0 {
status = "okay";
arm64: zynqmp: Move USB3 PHY properties from DWC3 node to USB node Move the PHY properties from DWC3 node to USB node in ZynqMP DTs as here the USB3 PHY used is PSGTR, which is connected to Xilinx USB core. This PHY initialization should be handled from Xilinx USB core as the prerequisite register configurations are done here only. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-14 12:17:19 +00:00
phy-names = "usb3-phy";
phys = <&psgtr 1 PHY_TYPE_USB3 0 1>;
arm64: zynqmp: Add System Controller for a2197-g/p Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-03-27 19:14:19 +00:00
};
&dwc3_0 {
status = "okay";
dr_mode = "peripheral";
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
maximum-speed = "super-speed";
};
&usb1 {
status = "okay";
};
&dwc3_1 {
/delete-property/ phy-names ;
/delete-property/ phys ;
dr_mode = "host";
maximum-speed = "high-speed";
snps,dis_u2_susphy_quirk ;
snps,dis_u3_susphy_quirk ;
status = "okay";
};
&xilinx_ams {
status = "okay";
};
&ams_ps {
status = "okay";
};
&ams_pl {
status = "okay";
};
Reference in a new issue Copy permalink