u-boot/board/ge/mx53ppd/mx53ppd_video.c

95 lines
2.1 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017 General Electric Company
*
* Based on board/freescale/mx53loco/mx53loco_video.c:
*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
* Fabio Estevam <fabio.estevam@freescale.com>
*/
#include <common.h>
#include <dm.h>
#include <linux/list.h>
#include <asm/arch/iomux-mx53.h>
#include <asm/mach-imx/video.h>
#include <linux/fb.h>
#include <ipu_pixfmt.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/imx-regs.h>
#include <asm/io.h>
#include <panel.h>
static int detect_lcd(struct display_info_t const *dev)
{
return 1;
}
static void lcd_enable(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
/* Set LDB_DI0 as clock source for IPU_DI0 */
clrsetbits_le32(&mxc_ccm->cscmr2,
MXC_CCM_CSCMR2_DI0_CLK_SEL_MASK,
MXC_CCM_CSCMR2_DI0_CLK_SEL(
MXC_CCM_CSCMR2_DI0_CLK_SEL_LDB_DI0_CLK));
/* Turn on IPU LDB DI0 clocks */
setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_LDB_DI0(3));
/* Turn on IPU DI0 clocks */
setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_IPU_DI0(3));
/* Configure LDB */
writel(IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
&iomux->gpr[2]);
}
static void do_enable_backlight(struct display_info_t const *dev)
{
struct udevice *panel;
int ret;
lcd_enable();
ret = uclass_get_device(UCLASS_PANEL, 0, &panel);
if (ret) {
printf("Could not find panel: %d\n", ret);
return;
}
panel_set_backlight(panel, 100);
panel_enable_backlight(panel);
}
struct display_info_t const displays[] = {
{
.bus = -1,
.addr = -1,
.pixfmt = IPU_PIX_FMT_RGB24,
.detect = detect_lcd,
.enable = do_enable_backlight,
.mode = {
.name = "NV-SPWGRGB888",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 15384,
.left_margin = 16,
.right_margin = 210,
.upper_margin = 10,
.lower_margin = 22,
.hsync_len = 30,
.vsync_len = 13,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
}
}
};
size_t display_count = ARRAY_SIZE(displays);